ProTec - Zerotohundred.com

Joeker · 02-09-2007, 02:07 PM

Professor of ECU,

Your name very popular in Ipoh. Everybody calls you "Phok Si" aka Professor of ECU, etc, etc.

I heard from freinds in Ipoh, even stock engine, after installed your DIY homemade standalone ECU "PROTEC" become monsters.

For example, one of your customer, a Toyota 1.6 4AGZE turbocharged, dynoed almost 300 on wheel horsepower using your PROTECH ECU.

THats VERY IMPRESIVE.

WHy don come to KL and show everybody your ECU.

Not only will you be able to show to the Japanese and Westeners of your electronic engineering capability, but also your PROTEC will benefit local car mod enthusiast with cheaper alternative of ECU standalone.

No point you are only dwelling in Ipoh and promoting on internet forums. Ipoh is very small market compared to KL and JB,

Please come KL and show the car mod industry how good your ECU is.

PS : Unecesary comments will be deleted.

Joeker · 02-09-2007, 02:14 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2.

Fellas, please support.

kennethfong · 02-09-2007, 02:27 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong

phat7 · 02-09-2007, 02:41 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7

ecupro · 02-09-2007, 03:05 PM

Joeker,
Many thanks to you and your support, any also other users.

Actually, there are few cars "laying down" in K.L.

and also thanks to "Speedchaser" who is good tunner for my ecu and stay in K.L. too.

I am a family man and have to take care my mother.
May be later...where the time come....

and Gong Xi Fa Choy to all....

Joeker · 02-09-2007, 03:14 PM

I'm also familyman.

Beside the case, we feel the creator himself will know his invention better.

I know its a bad timing for you to come KL with the CHinese New Year Holidays around the corner, anyhow please let us know when you can make it rite?

If its inconvieninet for you to travel alone, I can arrange accomodations for you and your family.

You may regard this as a business trip cum family holiday.

We are very eager to see the perfomance of using your DIY homemade standalone ECU.

Please come to KL as soon as possible.

g88 · 02-09-2007, 03:36 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7
4. g88

Joeker · 02-09-2007, 03:43 PM

I believe this is picture of an engine using ECUpro's DIY homemade standalone ECU "PROTECH"

The previous owner of this engine (the car has now sold to Kedah) claims it churns out nearly 300 horsepower on wheel.

Joeker · 02-09-2007, 03:54 PM

Specification of the 300 hp engine.

-1600cc 4AGZE engine.

- Garrett Turbocharger A/R .68

- DIY home-made standalone programmable ECU "PROTEC"

- ACL Conrod Bearings

- 45mm External wastegate regulated from 1~ 2 Bar

- No BOV

- DIY Length Tune turbo exhaust manifold with Thermo Wrap

- K&N Filter

- 7M-GTE Intercooler

- Stainless steel i/c plumbings.

- Pierburg External Fuel Pump, 6.5 bar pressure

PERFORMANCE : Witnesses to this car claims it can tarpau EVOs and other 2litre Turbo Cars with relative ease.

VERY OUTSTANDING Performance and Horsepower output considering the mods done.

Basil Basil · 02-09-2007, 03:58 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7
4. g88
5. basil

Stewart · 02-09-2007, 05:50 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7
4. g88
5. basil
6. stewart

khoyos · 02-09-2007, 09:55 PM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7
4. g88
5. basil
6. stewart
7. khoyos

would like to meet the man himself. hopefully will learn new knowledge when we meet him...

cipan_supercas · 02-09-2007, 11:04 PM

Even though I already saw it, if you have the time do come over. There are lots of others that would like to have a closer look. Maybe I can be 1 of your appointed installer for KL.

1. Joeker
2. Kennethfong
3. Phat7
4. g88
5. basil
6. stewart
7. khoyos
8. cipan

speedchaser · 02-10-2007, 02:06 AM

The car (4AGTE) concern was mine but not anymore. And I'm not really his customer but his friend which help him developed and the implementation of the ECU to the Toyota.

The new software which will run in WinXP (now still in DOS) is in development and will be out soon. Hopefully everything will be ready by March. Will definitely need tuners and installers by then.

Professore will definitely come to KL when the things are ready and if the Protech really generate a lot of interest in the local community. Another 3 demo cars (all with Automatic Transmission with valve body mods) will hopefully be running the ECU by then. (Mitsu V6TT, 1JZ-GTE single turbo and a BMW318 Turbo)

I will get some dyno sheets post up on a 1.6 Mivec Turbo which is already running the Protech. Another Mivec 1.8 big bored is in tuning stage and will be ready after CNY.

e819 · 02-12-2007, 09:25 AM

Yes, I'd like to see ECUpro's DIY homemade standalone ECU and DIY homemade Narrow band tunning skills in action

1. Joeker
2. Kennethfong
3. Phat7
4. g88
5. basil
6. stewart
7. khoyos
8.e819/am