Quote:
|
Originally Posted by hahaboy
bro, since u said the vr sensor cannot buy in malaysia. so i ned to find other method and i search the msextra forum and manual someone mod their stock dizzy 24 tooth to 24-2(12-1) but for the sensor i dunno whether can use the stock Ne signal as vr sensor . so i ned to confirm with you 1st.
cool down man .....
|
What I meant was, I myself don't know where to get those items locally. Maybe the new vdo equipped proton vr sensor can be use for this setup. However, I've never tried and I can't confirm it's functionality. To clear our doubt, it's better to get all those from a source that have proven that the items they sell can and will sure work with MS setup.
Different VR (Proton vdo system is also using VR) have different resistance, conductivity, resonance, impedance and sensitivity. If you don't mind to be a test project, then go ahead and use the proton VR sensor. So are Volvo and BMW. But they use GM. You get it?
From the pictures you presented, the disty sensor can be manupulate to run your machine on a wasted spark or Coil on plug configuration. If you have the necessary hardware (and have your mind set up too) on which system you'd like to run, then I can advise what are the necessary miscellanous components you have to get for your MS. You have to get the necessary coils either for wasted spark or COP.
I advise you to send your disty to a machine shop that can customise the disty cover for you or you'll risk a premature failure of your disty unit.
Sorry for being quite harsh at you but you're giving me ambigous info of what you intend to do. Be firm man. Make a solid decision or you're making me haywire too.
