wut is the best tyre size for myvi??

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
hello guys.. need your kind help.. i juz change my myvi rim to 15' sport rim (advanti) et35 7jj with 195/55/15 tyre size.. but my rear tyre hit the fender when full loaded or even when one person seat at the back at uneven road condition.. coz I juz bought the rim, Im planning to change the tyre size.. what min of tyre size can fit the rim which will not hit the fender when full loaded.. would like to try with 185/55 tyre but afraid it will still hit the fender and my money will gone as it was.. hope to get respond from u guys.. thanks..
Offset ET35 is too far out that is why hitting your wheel arch fender. You can try 185/55R15 or 195/50R15 and at the same time roll the fenders.....:driver:
 

ixeo

4,000 RPM
Senior Member
Jun 26, 2005
4,788
3,080
5,213
KL, Malaysia
hello guys.. need your kind help.. i juz change my myvi rim to 15' sport rim (advanti) et35 7jj with 195/55/15 tyre size.. but my rear tyre hit the fender when full loaded or even when one person seat at the back at uneven road condition.. coz I juz bought the rim, Im planning to change the tyre size.. what min of tyre size can fit the rim which will not hit the fender when full loaded.. would like to try with 185/55 tyre but afraid it will still hit the fender and my money will gone as it was.. hope to get respond from u guys.. thanks..
problem is the rim offset, not the tyres. rim 15 x 7jj et41, 195/50 R15 won't hit even with 5 passengers.
 

Random Post Every 5 Minutes

It all started with my odometer getting stucked and not moving. I took apart the meter console and managed to get the odometer fixed DIY. Now my prob is that the speedometer needle no longer moves smoothly. I believe I did not re-install it back properly. I am stumped because the speedometer needle assembly has got a very small ball bearing (just one) and I am not sure where to put this. My needle would move up with increase in speed but once I am slowing down, the needle does not move...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience