Kancil ignition key switch wiring

cyclonite

500 RPM
Senior Member
Nov 27, 2003
858
2
3,018
Hello guys, today my friend lost her car key so I had to hot wire her car for her. Just wanted to ask you guys what the blue wire is for? At the plug connected to the keyswitch, there's 5 wires.

1) red stripe
2) green stripe
3) yellow stripe
4) black
5) blue

I connected wires 1, 2, 3 together and all the accessories and lights could turn on. Then I touched these wires together with the black to engage the starter and then can drive back. But I never once used the solid blue wire. what is it for?

Thanks.
 

cyclonite

500 RPM
Senior Member
Thread starter
Nov 27, 2003
858
2
3,018
Ei the yellow and green, one is for ACC one is for ON mah. no meh?
 

cyclonite

500 RPM
Senior Member
Thread starter
Nov 27, 2003
858
2
3,018
Yo man, I just tried. It's true la... red connect to BLUE = ACC. you're so cool :)

Then what's the difference between the yellow and green one? I know one lights up the indicator lights on dashboard + air cond. The other one is neccessary otherwise the car won't start at all.
 

Random Post Every 5 Minutes

Beading Effect for KKE Thick Wax -

When water is sprayed on a normal car surface, the water would generally form a film and remain on the car paint and would probably dry on the car. The water drying on the car has several problems like leaving water spots, dirt dryin on the car etc. Even harmfull effects of bugs, tree saps, road film harms your car paint and its finish.

An unprotected car paint would probably have a water film.

KKE Thick Wax is to be applied by hand using a wax...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience