advise on clutch

pac_jb

Known Member
Feb 28, 2013
131
14
518
Kuala Lumpur
Hi,

Im currently using exedy organic clutch for evo 3, im planning to upgrade to semi race clutch, need advice on which brand is good for daily driving, I saw one racemaster clutch kit , its a mix of organic n ceramic , attached the picture, is it good? wp_ss_20160623_0001.png
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Bro., for daily drive do you need semi race clutch set? They should be much heavier and for daily drive if stuck in traffic will be bad for left leg.....
 

pac_jb

Known Member
Thread starter
Feb 28, 2013
131
14
518
Kuala Lumpur
hi bro,

if semi race is very heavy when in jam... i dont mind using organic.. which organic clutch is better... triniti or exedy... and how much is the maximum hp organic clutch can hold before it slips
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Don't know which is better between brands. Have been Exedy users all this while but on OEM replacements only for my VR. Works well enough for me since VR is daily drive only....
 

Shinjite

500 RPM
Senior Member
Feb 27, 2006
864
120
1,543
Klang
Running on Exedy 4 puck clutch kit, not bad. Pretty much okay for normal driving for me :)
 

sweelt

2,000 RPM
Nov 6, 2016
2,306
248
663
Penang
Bro., for daily drive do you need semi race clutch set? They should be much heavier and for daily drive if stuck in traffic will be bad for left leg.....
Spot on bro. I using exedy 3 puck. Pray no jamm...wahahaha
Left leg pain...
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
Don't know which is better between brands. Have been Exedy users all this while but on OEM replacements only for my VR. Works well enough for me since VR is daily drive only....
stock plate, heavy duty cover combo is the best option for street car.....
 

Random Post Every 5 Minutes

Hey guys, I'd appreciate any advice give on a particular problem I'm having with my car. I have a 4G92 MIVEC engine (using standard 4G92P engine block, crank and pistons), using the standard air filter, intake manifold and MIVEC extractor. Exhaust is a 1.7" pipe from the flexi-joint right to the back, with an S-flow muffler (in/out 1.7").

Recently, I've been experiencing some pretty bad acceleration with it. Thought it was in need of maintenance so I got it serviced. Currently using...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience