1jz E36 BMW frankensteining

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
I opted for the 17". Super rare size! Most Hammans are 18" and above. Managed to nego to 1.8k. Not sure about OZ Italy though. They should be if original. I see the Hamman label but don't see OZ or Made in anywhere in the etching.

...
Good choice going with the 17'. How wide? Square or staggered fitment? Hammans should be made by OZ Italy.
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Thread starter
Mar 28, 2004
15,389
6,411
5,213
KL
Good choice going with the 17'. How wide? Square or staggered fitment? Hammans should be made by OZ Italy.
8jj and unfortunately not staggered rim size. I'll be on the lookout for staggered rims though. Tyres I'll be sticking with my current tyres and only consider what to do after I wear them out. 245/40/17 rear and 235/45/17 front.
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
8jj and unfortunately not staggered rim size. I'll be on the lookout for staggered rims though. Tyres I'll be sticking with my current tyres and only consider what to do after I wear them out. 245/40/17 rear and 235/45/17 front.
Hmm should get wider rims, at least 8.5jj all round or staggered 8/9jj. Should just use 235/45/17 for all now. 245/40/17 is too small in diameter and sidewall a bit too thin like mine (only 9.8cm sidewall height). If go staggered 8/9jj, then can use 225/45 + 255/40.

What tires are those btw?
 

ixeo

4,000 RPM
Senior Member
Jun 26, 2005
4,788
3,080
5,213
KL, Malaysia
8jj and unfortunately not staggered rim size. I'll be on the lookout for staggered rims though. Tyres I'll be sticking with my current tyres and only consider what to do after I wear them out. 245/40/17 rear and 235/45/17 front.
Square is ALWAYS better. ALWAYS. Staggered is for the looks...if you're into that.. sure..

Staggered induces understeer.

RWD needs stagger? BS. Just get wide enough tires for both front and back and you're done.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Square is ALWAYS better. ALWAYS. Staggered is for the looks...if you're into that.. sure..

Staggered induces understeer.

RWD needs stagger? BS. Just get wide enough tires for both front and back and you're done.
He wants wider rear to hold it's power, but cannot fit wider into the front due to steering....lol
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
He wants wider rear to hold it's power, but cannot fit wider into the front due to steering....lol
Yes, coz the rears usually can fit much wider than front if you need as much rubber to maintain traction, hence that's why staggered.
 

Random Post Every 5 Minutes

Hi

Since my Lancer Engine swap I feel I should do a brake upgrade.

I am lucky that my lancer already has fairly good brakes, with rear disks but I now have about 60% more BHP.

On the back I think I can just put upgraded brake pads but I would like to go bigger on the front.

Current standard set up is 276 MM vented as per here:



I am running 16 inch wheels (which I would like to keep)...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience