DIY Smoke Headlamp for kelisa - Zerotohundred.com
Zerotohundred.com
Home Features News Forums The Marketplace Showcase Videos TIMETOATTACK! Store!
Go Back   Zerotohundred.com > Technical Section > Do-It-Yourself Garage


Reply
 
LinkBack Tools Search this Thread Display Modes
Old 01-15-2009, 11:43 AM   #1
Senior Member
 
crazeeclan's Avatar
 
Join Date: May 2005
Location: shah alam
Posts: 323
Likes: 1
Liked: 0 / 0 Posts
Send a message via ICQ to crazeeclan Send a message via MSN to crazeeclan
Default DIY Smoke Headlamp for kelisa


Those red circle are the screw attaching the bumper to the body...total u got 9 screw...after remove the bumper screw...remove those green screw...those are the headlight screw...each headlight got 3 screw...all are size 10 screw...u need a long head size 10 screw...canot use normal spanar coz the screw behind signal lamp and behind number plate there very narrow so normal spanar cant fit in...


This is after i seperated the light...sorry no pic when process of removing...but what i do is...i use hair dryer to blow at the gap between rear n front pcs of the light...then use a flat head screw driver and slowly separate it...pour abit of boiling hot water at the silicon to soften it then faster separate the light...took me 1 hour plus just to separate 2 headlight...


After separate it...tape and cover the reflector...remember to check and see any left out...it not u wil accidentally spray your light reflector....


Spray the reflector with RM5 FLAT BLACK color...no need to sand paper the reflector...just wipe it with clean cloth to make sure no dust or dirt.


Same goes to this...no need sand paper it...just wipe it with clean cloth...and make sure it really dry before u spray...after the paint is dry up..apply another layer on it...i apply 3 layer overall...


After spray..remove all those tape and pump abit of transparent silicon (RM8.90 bought at hardware shop)at the "longkang" then attach back the rear n front pcs of the headlight..and this is the result of it....

Spray = RM 5
Silicon Sealant = RM8.90
100 Plus = RM 3.90
Marlboro Light = RM 9 but smoke few stick only
Result of the headlight = PRICELESS SATISFACTION :D
crazeeclan is offline   Reply With Quote Share with Facebook
Old 01-15-2009, 12:39 PM   #2
Senior Member
 
tofu_manic's Avatar
 
Join Date: Jan 2007
Posts: 1,373
Likes: 459
Liked: 88 / 60 Posts
Default Re: DIY Smoke Headlamp for kelisa

looks good!

neat diy

time for taillights hehe
__________________
my 2 sen..
tofu_manic is offline   Reply With Quote Share with Facebook
Old 01-15-2009, 01:03 PM   #3
Senior Member
 
crazeeclan's Avatar
 
Join Date: May 2005
Location: shah alam
Posts: 323
Likes: 1
Liked: 0 / 0 Posts
Send a message via ICQ to crazeeclan Send a message via MSN to crazeeclan
Default Re: DIY Smoke Headlamp for kelisa

tail light? no idea yet...on the process on DIY projector headlamp already...hehe...
crazeeclan is offline   Reply With Quote Share with Facebook
Old 01-15-2009, 03:34 PM   #4
Senior Member
 
Join Date: Aug 2008
Location: Johore,
Posts: 400
Likes: 4
Liked 8 Times in 1 Post
Default Re: DIY Smoke Headlamp for kelisa

wah,so clever arr...just curious if water can penetrate inside...
__________________
no guts no glory
blackend is offline   Reply With Quote Share with Facebook
Old 01-16-2009, 12:08 AM   #5
Senior Member
 
roy_fatboy's Avatar
 
Join Date: Jul 2005
Location: Selangor
Posts: 844
Likes: 13
Liked: 16 / 8 Posts
Send a message via Yahoo to roy_fatboy
Default Re: DIY Smoke Headlamp for kelisa

Quote:
Originally Posted by blackend View Post
wah,so clever arr...just curious if water can penetrate inside...
actually any headlamps, sure abit of moisture will go in.. thats why behind every headlamp, there's like a small hole (normally connected with an 'L' shape rubber tube pointing downwards) to allow moisture to go out once you switch it on and heats up the temperature inside..

just make sure no BIG drops of water to pass through, then you'll be fine.. just seal back the place you open properly..
__________________
roy_fatboy is offline   Reply With Quote Share with Facebook
Old 01-16-2009, 09:29 AM   #6
Senior Member
 
crazeeclan's Avatar
 
Join Date: May 2005
Location: shah alam
Posts: 323
Likes: 1
Liked: 0 / 0 Posts
Send a message via ICQ to crazeeclan Send a message via MSN to crazeeclan
Default Re: DIY Smoke Headlamp for kelisa

Quote:
Originally Posted by blackend View Post
wah,so clever arr...just curious if water can penetrate inside...
water never enter at all...just to remember to pump in some silicon sealant when u close back the headamp....
crazeeclan is offline   Reply With Quote Share with Facebook
Old 01-16-2009, 11:02 PM   #7
1bhp Stock
 
Join Date: Jan 2009
Posts: 1
Likes: 0
Liked: 0 / 0 Posts
Default Re: DIY Smoke Headlamp for kelisa

wah very nice job bro
budak_baru is offline   Reply With Quote Share with Facebook
Old 01-17-2009, 04:54 PM   #8
Senior Member
 
Join Date: Jul 2005
Location: JB
Posts: 2,011
Likes: 0
Liked 1 Time in 1 Post
Default Re: DIY Smoke Headlamp for kelisa

i paid RM100 for it :(
2 years ago....sad
BV5015 is offline   Reply With Quote Share with Facebook
Old 01-18-2009, 11:44 AM   #9
Senior Member
 
Shanashi's Avatar
 
Join Date: Nov 2003
Posts: 706
Likes: 21
Liked: 16 / 11 Posts
Send a message via ICQ to Shanashi Send a message via Yahoo to Shanashi
Default Re: DIY Smoke Headlamp for kelisa

wow good job bro as i know most ppl scared to open their headlamps cuz takut water masuk headache but ur daring respect!
Shanashi is offline   Reply With Quote Share with Facebook
Old 01-18-2009, 10:13 PM   #10
Senior Member
 
webeck948's Avatar
 
Join Date: Jul 2006
Posts: 55
Likes: 0
Liked: 0 / 0 Posts
Default Re: DIY Smoke Headlamp for kelisa

Just to share =)

This is how mine turned out, started with matte black then sprayed on with Gerhana Grey, result's almost like gunmetal in my opinion =)



__________________
webeck948 is offline   Reply With Quote Share with Facebook
Old 01-19-2009, 03:39 PM   #11
350bhp Nitrous Member
 
sdil_trdtoms's Avatar
 
Join Date: Oct 2007
Posts: 386
Likes: 0
Liked: 2 / 2 Posts
Default Re: DIY Smoke Headlamp for kelisa

fuh nice done!! power oooo!
__________________
sdil_trdtoms is offline   Reply With Quote Share with Facebook
Old 01-22-2009, 04:22 PM   #12
Senior Member
 
aalto's Avatar
 
Join Date: Dec 2004
Posts: 405
Likes: 18
Liked: 92 / 51 Posts
Default Re: DIY Smoke Headlamp for kelisa

put headlight into oven for about 3-4 mins, it's faster & easier to seperate the cover....just dont overcook it!....

put back again in again after you're done and applied back the silicone sealant, then take out and press it while it cools.

Good as new....

Last edited by aalto; 01-22-2009 at 04:26 PM.
aalto is offline   Reply With Quote Share with Facebook
Old 01-23-2009, 08:55 AM   #13
Senior Member
 
donCityZ's Avatar
 
Join Date: Feb 2006
Posts: 2,298
Likes: 27
Liked: 33 / 20 Posts
Default Re: DIY Smoke Headlamp for kelisa

If oven too small how leh?
__________________
donCityZ is offline   Reply With Quote Share with Facebook
Old 01-23-2009, 09:23 AM   #14
Senior Member
 
crazeeclan's Avatar
 
Join Date: May 2005
Location: shah alam
Posts: 323
Likes: 1
Liked: 0 / 0 Posts
Send a message via ICQ to crazeeclan Send a message via MSN to crazeeclan
Default Re: DIY Smoke Headlamp for kelisa

Quote:
Originally Posted by Shanashi View Post
wow good job bro as i know most ppl scared to open their headlamps cuz takut water masuk headache but ur daring respect!
haha...DIY is about trial n error...so have to take the risk...till now...i have help to DIY 5 pair of headlamp for kelisa ady...and the best part is there is no anyone complain water get into inside of the headlamp...

Bump:
Quote:
Originally Posted by aalto View Post
put headlight into oven for about 3-4 mins, it's faster & easier to seperate the cover....just dont overcook it!....

put back again in again after you're done and applied back the silicone sealant, then take out and press it while it cools.

Good as new....
use oven abit risky...i only use hair dryer and hot water...very fast...
crazeeclan is offline   Reply With Quote Share with Facebook
Old 01-24-2009, 10:11 PM   #15
Senior Member
 
radhie's Avatar
 
Join Date: May 2006
Posts: 552
Likes: 73
Liked: 50 / 26 Posts
Default Re: DIY Smoke Headlamp for kelisa

great job man..
radhie is offline   Reply With Quote Share with Facebook
Reply

  Zerotohundred.com > Technical Section > Do-It-Yourself Garage

Previous: Previous Thread | Next Thread :Next
Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes







2000 - 2014 Zerotohundred.com - The Automotive Lifestyle Network | Tags | Terms of Use | Visitor Agreement | Privacy Policy | Contact Us | Privacy Statement | Top