how to adjust kancil 850M (caburator type) idle rpm? - Zerotohundred.com
Zerotohundred.com
Home Features News Forums The Marketplace Showcase Videos TIMETOATTACK! Store!
Go Back   Zerotohundred.com > Technical Section > Do-It-Yourself Garage


Reply
 
LinkBack Tools Search this Thread Display Modes
Old 11-21-2007, 10:57 AM   #1
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default how to adjust kancil 850M (carburator type) idle rpm?

Hi,
I'm a kancil owner(850 manual carburator type). Recently I have my timing tune by mechanic, I can see that he tune the timing by changing the angle of the distributor. After he tune for the timing, I just found out that idle speed is become high around 1400rpm. & he said it is not possible to adjust the idle rpm since kancil don't have idle rpm adjustment screw .....1400rpm seem to be high for me cause manual stated that idle rpm should be around 1000rpm.

Anyone here know how to adjust the idle rpm for the kancil? where is the idle rpm adjustment screw located? really thanks in advance

Last edited by lysiong; 11-21-2007 at 03:58 PM.
lysiong is offline   Reply With Quote Share with Facebook
Old 11-21-2007, 05:25 PM   #2
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

& I do need to know the A/F mixture screw also......I just check the carburator, I can see that it got big & small screw at the back. hope someone will help me to identify it......thanks in advance
lysiong is offline   Reply With Quote Share with Facebook
Old 11-21-2007, 05:44 PM   #3
Senior Member
 
SkYwAlKeR's Avatar
 
Join Date: Mar 2005
Location: ePoh ~ malacca
Posts: 10,170
Likes: 812
Liked: 303 / 153 Posts
Send a message via MSN to SkYwAlKeR Send a message via Yahoo to SkYwAlKeR
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

got lah... all carburetor must got idle speed screw....
if not mistaken kancil carburetor got 1 air screw and 1 fuel screw separately.... means u need to tune both to get optimum AFR...

not too sure... last time my friend explain to me... i didnt bother listen coz not my car... lolz... besides, kancil engine bay so small, cannot peek behind to see where is the screw also...
__________________
SkYwAlKeR is offline   Reply With Quote Share with Facebook
Old 11-22-2007, 12:28 PM   #4
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

skywalker, thanks for reply.

anyone else know where the idle screw adjustment located?
lysiong is offline   Reply With Quote Share with Facebook
Old 11-24-2007, 08:07 AM   #5
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

hello, anybody there?
lysiong is offline   Reply With Quote Share with Facebook
Old 11-27-2007, 08:47 AM   #6
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

knock, knock, hello, anybody there can answer my question??
lysiong is offline   Reply With Quote Share with Facebook
Old 11-27-2007, 11:26 PM   #7
1bhp Stock
 
Join Date: Jul 2006
Posts: 2
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

1.200 rpm with o2 tunnig machine 2.0%
THOMASLEE is offline   Reply With Quote Share with Facebook
Old 11-28-2007, 12:40 AM   #8
Senior Member
 
burnner's Avatar
 
Join Date: Feb 2007
Posts: 1,575
Likes: 0
Liked: 4 / 3 Posts
Send a message via Yahoo to burnner
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

ok...don't worry about both the air and fuel mixture screw.

what you may need to do now is, look for a screw which when you press your pedal a plate will move, this plate is seated on a screw. when you adjust this screw, it will slowly increase or decrease your rpm. if you are still blur2, please do give me a call. Susah abit wanna explain by words...
__________________
burnner is offline   Reply With Quote Share with Facebook
Old 11-28-2007, 12:41 AM   #9
lkk
Senior Member
 
Join Date: Jan 2004
Posts: 147
Likes: 36
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

errr... if not mistaken the idle screw is locate at the back part of the carb( the firewall side) n seat under the carb. try see at the back n the middle of the carb. there is the only screw can pusing.

dun shot me if i am wrong r.... hehe

just my 2 cents.
lkk is offline   Reply With Quote Share with Facebook
Old 11-28-2007, 08:06 AM   #10
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

ThomasLee, Burnner & Ikk , thanks for reply. will try to locate the idle screw. But what I found on the forum, normally the idle screw got a spring on it. will let you guy know once I found it :)
lysiong is offline   Reply With Quote Share with Facebook
Old 11-28-2007, 03:08 PM   #11
Senior Member
 
burnner's Avatar
 
Join Date: Feb 2007
Posts: 1,575
Likes: 0
Liked: 4 / 3 Posts
Send a message via Yahoo to burnner
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

yes..the idle screw have spring on them. So you may need to check properly before you adjust anything ok..

best of luck on this.
__________________
burnner is offline   Reply With Quote Share with Facebook
Old 12-17-2007, 03:11 PM   #12
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

look like I already found the idle screw, it is located at near to the firewall. It has a big screw with a spring on it.
thanks anyone who reply to this thread.
lysiong is offline   Reply With Quote Share with Facebook
Old 12-18-2007, 09:18 PM   #13
400bhp Turbo Member
 
Join Date: Nov 2004
Posts: 429
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

then wat happen?idle screw is at the side front..
chilskater is offline   Reply With Quote Share with Facebook
Old 12-19-2007, 11:13 AM   #14
Senior Member
 
Join Date: Nov 2007
Posts: 8
Likes: 0
Liked: 0 / 0 Posts
Default Re: how to adjust kancil 850M (caburator type) idle rpm?

Quote:
Originally Posted by chilskater View Post
then wat happen?idle screw is at the side front..
is at the back of the carburator, is quite inside. my hand need to go deep inside around 20cm to reach it. is a very big screw with a "flat philips head" on it. The size of the screw head look like similar to 5cents.
lysiong is offline   Reply With Quote Share with Facebook
Reply

  Zerotohundred.com > Technical Section > Do-It-Yourself Garage

Previous: Previous Thread | Next Thread :Next
Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes



Latest Posts
  Satria SE 1.5 Manual
Last Post Yesterday 08:10 PM
  Perdana ZerOne Adjustable absober soft-hard hi-lo
Last Post Yesterday 05:40 PM
  K&N Drop-in Filter for Honda CRZ
Last Post Yesterday 04:24 PM




2000 - 2014 Zerotohundred.com - The Automotive Lifestyle Network | Tags | Terms of Use | Visitor Agreement | Privacy Policy | Contact Us | Privacy Statement | Top