- Feb 18, 2005
- 4,448
- 8
- 3,138
New Product Realise P.Iswara front 2point lower arm bar
http://redlinemax.blogspot.com/
CUSTOMER FEEDBACK FOR ZENDEN BAR PART1 PART2 PART3 PART4 PART5 PART6 PART 7
31Page Of Feedack From My Avanza.net
A member of toyota tribe club
Why We Need A strut Bar?
Normal Mild Steel Strut Bars 0% Flexing:
WHY SAID SO,BECAUSE THE FLEXING FOR STEEL BAR IS ALWAYS "0%" A LOT OF THE CHASSIS CANNOT STAND FOR THE HIGH PRESSURE DURING HARD CORNER & LONG TERM USAGE BECAUSE STEEL BAR=HARD BAR PUSHING HARD BODY(HARD PUSH HARD)
THE CHASSIS MIGHT BE:
1.DAMAGE
2.CRUSHED OUT OF SHAPE
3.SUFFER OPPRESSION CAR FRAME WELL BE DISTORTED
4.THE ORIGINAL BOLT&NUTBROKE MIGHT OFF TOO.
Zenden 100% Alloy T5 6061 Flexibility Strut Bar
THAT WHY ZENDEN ALWAYS DEVELOP STRUT BAR BY USING HIGH GRADE ALLOY WITH ELASTICITY,THE EFFICIENT DIRECTLY CAUSED THE STABILITY OF ZENDEN STRUT BAR,WHILE CORNERINGIT REDUCE REBOUNDING FORCE BY COUNTER FROM THE G-FORCE,BECAUSE ALLOY BAR WITH ELASTICITY SO IT WONT HARM YOUR CAR,
Comparison Normal Steel Made Bar with Alloy Bar
Click here to bealieve
Or
I don't think any one wish their bar become like this
YA!ALOT OF CUSTOMER ASKED ME,MORE HARD MORE BETTER FOR STABILITY,NOT MEH??
Answer:
Yes you are right,More hard more stable,but try to think about it,
We install strut bar not only because of stability,
Please consider few issue like:
1.Safety
2.Comfortable
3.Will it damage the Chassis of your Love Vehicle?
One of the major issue:
How fast can we turn a corner on street?
180km/h or over?If over speed on those sharp cornering,
No matter what type of bar you using,Your car will still lose Control,The strut bar just an add on part for your car to be more Stability,comfortable,reliable to drive.
Clarify The usage For Strut Bar:
It is not a god-mod for you to turn a sharp corner with over Speeding,Or doing impossible stunt,
I believe ZENDEN ALLOY STRUT BAR is more then enough to satisfy on this few issue,
Have you ever see Cusco(japan),Alutech(Singapore) developing 4point Front bar to Screw on top of Front radiator chassis?
I Think Most of our smart forumer should know the standard of Japanese&Singapore company
Especially for those Malaysian made Vehicle,I think you could bent The front part for your chassis"On top of the radiator" with you Hand,Smart Malaysian please use your comment sense.
You should know the "Both Left and Right Mounting Tower",It Is the Stronger Part to hold the Front Stability of your vehicle.
Why we spend more money for Unnecessary Point Strut Bar?
And where you money go?
1.Pay more because of the Advertising Fee
2.buying a welding/bended mild steel with highest price
3.With the price you could buy a lot of mild steel
4.With the price by using cheap powder coating compare with
Zenden Anodized You should know what is the best choice And value for money
The Thickness inside the Zenden Bar
0122023765 just drop me a call, any order before 1pm on the same day,will delivery on the same day,Free Delivery Plus Free installation
Why Purchase From Me?
Save your Patrol
Save your Parking Fee
Save your installation charge
Save your Time for Traffic Jam
Because i do:
Free Installation & Free Delivery valid to KL,PJ,sunway area customer On Side Service to your Door step/Office
Please Call/SMS/PM 0122023765 For the best Price
The Xtreme Nights
Special thanks for brother Fred aka Fstrader for trusted our product on GRA Autocross events REVIEW BY Fstrader aka Fred
It come With Warrenty Card for any purchase,
Valid as 2 Year 1 to 1 Garrenty,And life time repair warrenty
Zenden Bar user in Honda Club Gathering at Sepang F1 circuit
EON SHOW ROOM
Familia with this?Yes,This is the Development car that inspired Prot** R*
TOYOTA ALTIS
Wira
WAJA
REAR UPPER For Wira,Waja,Gen2,Putra,Satria,Gti
GEN2
WIRA Lower 4 POINT ABLE TO USE ON PUTRA,STRIA,GTi
New!! update Front Tower Bar For Toyota Vios 07-09
AVANZA
Honda City/FIT/Jazz
Hyudai Matrix
Price List:
*means 3 color for choice (Red,Blue or chrome)
Front upper=Rm130 *
Rear Upper=Rm130 *
Rear Lower=Rm70 *
Front Lower 4point=From Rm180 to Rm260
Call contact=012-2023765(KENT)
Some model availble for rear upper & lower Please PM/SMS for best Price
Stock Ready for all the vehicle listed below:
Volvo
S40
S70
S90
Subaru
Impreza WRX
Impreza V,VI,VII
TOYOTA
TOYOTA COROLLA AE101/111/SEG
TOYOTA ALTIS
TOYOTA VIOS
TOYOTA WISH
TOYOTA Avanza
TOYOTA Camry 97
TOYOTA Camry 2003
TOYOTA YARIS
TOYOTA VIOS 08
HONDA
CIVIC EG/SR
CIVIC EK
CIVIC 1.7
CIVIC 2.0
CITY 09
CITY 97
CITY 04
JAZZ/FIT/
Accord SM4/SV4/C.G/2.0/2.4
PRELUDE 92
CRV96/2002
HONDA STREAM
MITSUBISHI
VR4
Lancer 07
Lancer 06
EVO I II III
EVO IV VII VIII
AIRTRAK
MAZDA
LANTIS
323
FORD
TELSTAR 1.6
TELSTAR 1.8
LYNS 1.8
LYNS 2.0 2000
PROTON
Gen2
WIRA SE
BLM
WIRA
GTI
NEO
PUTRA
WAJA
PERDANA
WIRA/PUTRA/GTI/ 4 Point Front Lower Bar
WAJA/Gen2 4point Front Lower Bat
PRODUA
KANCIL
KELISA
KENARI
KEMBARA
MYVI
KIA
SPECTRA 5/Kia Cerato
SPECTRA
SEPHIA
CERENS
CARNIVAL
NASA RIA
RIO 1.3
NISSAN
SENTRA B-14
SENTRA B-15
SENTRA B-16
CEFIRO
CEFIRO 2002
X-TRIAL
HYUNDAI
ELANTRA
ELANTRA(singapore version)
ASSEND
COUPE 95
SONATA
ATOS
MATRIX 1.6
MATRIX 1.8
Notice
We have 10 year Expirance on making struct bar,but early b4 we just Supplie for some of the branded company and also export to other country.....so don't worry about the quality,Please take Note,Zenden is zenden,all our product must come togather with warrenty card,zenden sand spray logo,rivert logo or sticker logo.
Free Installation & Free Delivery valid to KL,PJ,sunway area customer On Side Service to your Door step/Office
Metirial & Colour Detail:
Metirial=T5 Air Craft Grade Alloy
Colour=Enodyes Coloured
Chrome=Polishing Chrome 100% won't Rusty
Quality=Malaysia No.1 Alloy Strut Bar(Test it to Believe)
About Void warrenty or JPJ factor,Please Don't Worry,Because Proton Edda and New Satrix Rx are using and also selling our Bar
Able to contect me on:
MSN:[email protected]
cellphone:0122023765
Purchase By Cash On delivery
Via Banking:
Maybank:1145-6106-0904 Teoh Keng Koon
Outstation Customer
RM10 needed for the Postage
Saba/Sarawak
RM25 needed for the Postage for each 5KG
http://redlinemax.blogspot.com/
CUSTOMER FEEDBACK FOR ZENDEN BAR PART1 PART2 PART3 PART4 PART5 PART6 PART 7
31Page Of Feedack From My Avanza.net
A member of toyota tribe club
Why We Need A strut Bar?
Normal Mild Steel Strut Bars 0% Flexing:
WHY SAID SO,BECAUSE THE FLEXING FOR STEEL BAR IS ALWAYS "0%" A LOT OF THE CHASSIS CANNOT STAND FOR THE HIGH PRESSURE DURING HARD CORNER & LONG TERM USAGE BECAUSE STEEL BAR=HARD BAR PUSHING HARD BODY(HARD PUSH HARD)
THE CHASSIS MIGHT BE:
1.DAMAGE
2.CRUSHED OUT OF SHAPE
3.SUFFER OPPRESSION CAR FRAME WELL BE DISTORTED
4.THE ORIGINAL BOLT&NUTBROKE MIGHT OFF TOO.
Zenden 100% Alloy T5 6061 Flexibility Strut Bar
THAT WHY ZENDEN ALWAYS DEVELOP STRUT BAR BY USING HIGH GRADE ALLOY WITH ELASTICITY,THE EFFICIENT DIRECTLY CAUSED THE STABILITY OF ZENDEN STRUT BAR,WHILE CORNERINGIT REDUCE REBOUNDING FORCE BY COUNTER FROM THE G-FORCE,BECAUSE ALLOY BAR WITH ELASTICITY SO IT WONT HARM YOUR CAR,
Comparison Normal Steel Made Bar with Alloy Bar
Click here to bealieve
Or
I don't think any one wish their bar become like this
YA!ALOT OF CUSTOMER ASKED ME,MORE HARD MORE BETTER FOR STABILITY,NOT MEH??
Answer:
Yes you are right,More hard more stable,but try to think about it,
We install strut bar not only because of stability,
Please consider few issue like:
1.Safety
2.Comfortable
3.Will it damage the Chassis of your Love Vehicle?
One of the major issue:
How fast can we turn a corner on street?
180km/h or over?If over speed on those sharp cornering,
No matter what type of bar you using,Your car will still lose Control,The strut bar just an add on part for your car to be more Stability,comfortable,reliable to drive.
Clarify The usage For Strut Bar:
It is not a god-mod for you to turn a sharp corner with over Speeding,Or doing impossible stunt,
I believe ZENDEN ALLOY STRUT BAR is more then enough to satisfy on this few issue,
- Comfortable Drive
- Protecting your car chassis
- Reasonable Price
- High quality T5 Air Craft Alloy(International identified quality)
- Stability for Driving
Have you ever see Cusco(japan),Alutech(Singapore) developing 4point Front bar to Screw on top of Front radiator chassis?
I Think Most of our smart forumer should know the standard of Japanese&Singapore company
Especially for those Malaysian made Vehicle,I think you could bent The front part for your chassis"On top of the radiator" with you Hand,Smart Malaysian please use your comment sense.
You should know the "Both Left and Right Mounting Tower",It Is the Stronger Part to hold the Front Stability of your vehicle.
Why we spend more money for Unnecessary Point Strut Bar?
And where you money go?
1.Pay more because of the Advertising Fee
2.buying a welding/bended mild steel with highest price
3.With the price you could buy a lot of mild steel
4.With the price by using cheap powder coating compare with
Zenden Anodized You should know what is the best choice And value for money
The Thickness inside the Zenden Bar
0122023765 just drop me a call, any order before 1pm on the same day,will delivery on the same day,Free Delivery Plus Free installation
Why Purchase From Me?
Save your Patrol
Save your Parking Fee
Save your installation charge
Save your Time for Traffic Jam
Because i do:
Free Installation & Free Delivery valid to KL,PJ,sunway area customer On Side Service to your Door step/Office
Please Call/SMS/PM 0122023765 For the best Price
The Xtreme Nights
Special thanks for brother Fred aka Fstrader for trusted our product on GRA Autocross events REVIEW BY Fstrader aka Fred
It come With Warrenty Card for any purchase,
Valid as 2 Year 1 to 1 Garrenty,And life time repair warrenty
Zenden Bar user in Honda Club Gathering at Sepang F1 circuit
EON SHOW ROOM
Familia with this?Yes,This is the Development car that inspired Prot** R*
TOYOTA ALTIS
Wira
WAJA
REAR UPPER For Wira,Waja,Gen2,Putra,Satria,Gti
GEN2
WIRA Lower 4 POINT ABLE TO USE ON PUTRA,STRIA,GTi
New!! update Front Tower Bar For Toyota Vios 07-09
AVANZA
Honda City/FIT/Jazz
Hyudai Matrix
Price List:
*means 3 color for choice (Red,Blue or chrome)
Front upper=Rm130 *
Rear Upper=Rm130 *
Rear Lower=Rm70 *
Front Lower 4point=From Rm180 to Rm260
Call contact=012-2023765(KENT)
Some model availble for rear upper & lower Please PM/SMS for best Price
Stock Ready for all the vehicle listed below:
Volvo
S40
S70
S90
Subaru
Impreza WRX
Impreza V,VI,VII
TOYOTA
TOYOTA COROLLA AE101/111/SEG
TOYOTA ALTIS
TOYOTA VIOS
TOYOTA WISH
TOYOTA Avanza
TOYOTA Camry 97
TOYOTA Camry 2003
TOYOTA YARIS
TOYOTA VIOS 08
HONDA
CIVIC EG/SR
CIVIC EK
CIVIC 1.7
CIVIC 2.0
CITY 09
CITY 97
CITY 04
JAZZ/FIT/
Accord SM4/SV4/C.G/2.0/2.4
PRELUDE 92
CRV96/2002
HONDA STREAM
MITSUBISHI
VR4
Lancer 07
Lancer 06
EVO I II III
EVO IV VII VIII
AIRTRAK
MAZDA
LANTIS
323
FORD
TELSTAR 1.6
TELSTAR 1.8
LYNS 1.8
LYNS 2.0 2000
PROTON
Gen2
WIRA SE
BLM
WIRA
GTI
NEO
PUTRA
WAJA
PERDANA
WIRA/PUTRA/GTI/ 4 Point Front Lower Bar
WAJA/Gen2 4point Front Lower Bat
PRODUA
KANCIL
KELISA
KENARI
KEMBARA
MYVI
KIA
SPECTRA 5/Kia Cerato
SPECTRA
SEPHIA
CERENS
CARNIVAL
NASA RIA
RIO 1.3
NISSAN
SENTRA B-14
SENTRA B-15
SENTRA B-16
CEFIRO
CEFIRO 2002
X-TRIAL
HYUNDAI
ELANTRA
ELANTRA(singapore version)
ASSEND
COUPE 95
SONATA
ATOS
MATRIX 1.6
MATRIX 1.8
Notice
We have 10 year Expirance on making struct bar,but early b4 we just Supplie for some of the branded company and also export to other country.....so don't worry about the quality,Please take Note,Zenden is zenden,all our product must come togather with warrenty card,zenden sand spray logo,rivert logo or sticker logo.
Free Installation & Free Delivery valid to KL,PJ,sunway area customer On Side Service to your Door step/Office
Metirial & Colour Detail:
Metirial=T5 Air Craft Grade Alloy
Colour=Enodyes Coloured
Chrome=Polishing Chrome 100% won't Rusty
Quality=Malaysia No.1 Alloy Strut Bar(Test it to Believe)
About Void warrenty or JPJ factor,Please Don't Worry,Because Proton Edda and New Satrix Rx are using and also selling our Bar
Able to contect me on:
MSN:[email protected]
cellphone:0122023765
Purchase By Cash On delivery
Via Banking:
Maybank:1145-6106-0904 Teoh Keng Koon
Outstation Customer
RM10 needed for the Postage
Saba/Sarawak
RM25 needed for the Postage for each 5KG
Attachments
-
140.8 KB Views: 13,521
Last edited: