who expert in ice please help me....help help...

oldskolboyz

500 RPM
Senior Member
Sep 2, 2005
780
1
1,518
Kuala Lumpur
appleyard said:
oldskol
pls reread my post if you dont understand what i'm trying to say.

1) Yes DVC is Dual Voice Coil, my question is which part of the ifo that this subs is DVC i only saw its a SVC subs.

2) And how would you know that 360w@4ohm is max power.... where did you get that info... or are you assuming that????

3) Why would he wired it to 16 ohm care to explain???? Even you get a top end amp wont even have much power in 16 ohm. Ever heard of parallel wiring?????

I'm not sure this amp is class A or B or A/B but this amp is too hot to handle :)
appleyard, why so angree..

No 1: I'm refering to energie 11/04/2006 "dual vc GT" in series
No 1: 150w X 2 & 380 X 1, I know very well Atomic brand.. I'm the victim
No 3: did you read my post on 13/04/2006 or you want me write it again here... 2pc DVC 4ohm connect in series will 4Ohm.. not 16ohm as my earlier post... I'm so sorry about it due to miscalculate... I admit that...
 

Kippo

Known Member
Senior Member
Mar 5, 2005
263
0
3,016
acid,
i'm a bit rustly here so u need to make sure what i give is correct :D

you can run both JBL subs with that Atomic amp but a few settings need to be made.

1. Make same signal going to both Left - Right RCA input of the amp. You can use Y-splitter for the Left RCA cable from HU & plug it into L-R amp RCA input. So now both L-R amp input signal is same. Bass is mono so dont worry about the stereo thing.

2. If i'm not mistaken, Left channel of amp is 180deg. out of phase relative to Right channel of amp. So you need to do reverse polarity with one of the sub.
*others correct me if this is true. It could be true for some amp only*

3. You get bass but dont expect it to be loud since i suspect the Atomic amp is power rating is overrated. Also do not push the amp into distortion.
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
i think Atomic brand is very good becoz its normarlly brand for home theater of coz there are speacialist in a sound system..

anyoneagree with me..
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
kyheng said:
From the amount you pay for the amp you can know is the amp good or not...
i dont think so la bro
sometimes the product very low price but the quality is very very good..

i think ll model brand made from USA is a better from other made

i think la...

not sure..

r u agree?
 

oldskolboyz

500 RPM
Senior Member
Sep 2, 2005
780
1
1,518
Kuala Lumpur
Not all made from USA is better... some from Europe... DLS, Sinfoni, Brax, Helix, Genesis, Audison, PHD, Revamp, Xetec, Audio System, Steg... some from Japan Alpine F#1 & old V12 seris, Luxman, Naka... from US like Zapco, Tru, SS Human Reign, Orion HCCA G4/5 & XTR, PG, Mcintosh, PPI
 

kyheng

1,000 RPM
Senior Member
May 20, 2005
1,202
0
3,136
seremban
For me, cheap things dosen't mean that is no good, only most of the people think like this. If the US brand is really made in US, then the quality will be better than other that made in China or... But now most of the US brands are made in China.
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
kyheng said:
For me, cheap things dosen't mean that is no good, only most of the people think like this. If the US brand is really made in US, then the quality will be better than other that made in China or... But now most of the US brands are made in China.

i agrree u bro

now in malaysia very hard to find any product pure USA made..

erm..

anyone who know the brand and made from..?
kindly list for me
 

oldskolboyz

500 RPM
Senior Member
Sep 2, 2005
780
1
1,518
Kuala Lumpur
As I know only top model production still in USA...... why don't you change from USA product to Europe product.... like Brax, Sinfoni, Genesis, Audison, Audio System, DLS, PHD, Steg, Xetec, Helix....... for me best amp from US right know only Tru Technology, Sound Stream Human Reign 2/4 & several top model Zapco...
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
oldskolboyz said:
As I know only top model production still in USA...... why don't you change from USA product to Europe product.... like Brax, Sinfoni, Genesis, Audison, Audio System, DLS, PHD, Steg, Xetec, Helix....... for me best amp from US right know only Tru Technology, Sound Stream Human Reign 2/4 & several top model Zapco...
ooicc...

but i think very hard to find the acc shop while they sale this product..

can u PM me wheres i want find..?
 

oldskolboyz

500 RPM
Senior Member
Sep 2, 2005
780
1
1,518
Kuala Lumpur
Yup... U can survey at this shop KF Audio Aman Suria, ACP PJ, SoundQuest Cheras, KK Lau around PJ, MegaSound PJ if I not mistaken laaa.... but some of those product beyond your budget... 2 or 3 amp can get 1 new MYvi or Wira SE....
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
oldskolboyz said:
Yup... U can survey at this shop KF Audio Aman Suria, ACP PJ, SoundQuest Cheras, KK Lau around PJ, MegaSound PJ if I not mistaken laaa.... but some of those product beyond your budget... 2 or 3 amp can get 1 new MYvi or Wira SE....
hehehe
watever tq

mayb i can improve my knowledge
 

r60262

Known Member
Senior Member
Mar 23, 2006
282
0
1,516
increase you amp watt to support you woofer... use 1000w 2 channel
 

acidcoller

500 RPM
Senior Member
Thread starter
Mar 29, 2006
939
2
1,518
r60262 said:
increase you amp watt to support you woofer... use 1000w 2 channel

bro..
what ur means..


ermmm...

for examples

can i use this amp

General
Output 4 Ohms 150W x 1
Output 2 Ohms 300W x 1
Signal-to-Noise Ratio >100
Frequency Response (±3dB) 20Hz - 500Hz
Total Harmonic Distortion 0.1%
Input Sensitivity 250mV - 4V



or


RMS watt @ 4 Ohm = 1x400w
RMS watt @ 2 ohm = 1x700w
RMS watt @ 1 Ohm = 1x1200w
Frequency Response = 20Hz - 2500Hz
Total Harmonic Distortion 0.1%

or any suggest for spec i must get???
 

Random Post Every 5 Minutes

hello people,

I have a problem and need some suggestions.

My 4G63T was fully overhauled. What is did was used ACL Racing Bearing ( Main & Conrods ), then balanced the flywheel, conrods, pistons and clutch cover with MatSpeed. I installed a Toda Metal head gasket.

Currently I am using Thailand Brand Manifold and Wastegate and at 2.8 bar fuel pressure my manifold is turning red. Any lower no power and higher - the engine feels heavy. Any idea where I should troubleshoot.

I had...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience