Wheels/Rims/Roda

[A]aronLJW

Junior Member
Feb 2, 2017
14
5
3
isn't this the S1 :



If not then I'm mistaken. Cuz the one I'm talking about is this one. And this is the one I wanted to buy.

Aaron do you drive a Wira SE with 17" rims? :biggrin: If yes I met you at Heng Tatt Mahkota Cheras
Nope not me, I'm on 16 inch S1 but planning on 17" S1 in the future.

Hehe so you're here also now. :biggrin:
Will occasionally hang out here, thanks to LSM1991 drag me here haha
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
[A]aronLJW;1064694958 said:
Nope not me, I'm on 16 inch S1 but planning on 17" S1 in the future.



Will occasionally hang out here, thanks to LSM1991 drag me here haha
Thanks Aaron, stick around. Some people here like me want to explore alternative rims. Hehe.. Does Advanti have any sort of "deep dish" or something type of design rather than the "flat" S1 design? I used to use this rim



and it had a slight positive offset which made it interesting. But unfortunately I found Konig kinda susceptible to knocks and dings so swapped to the S1. But the S1 is kinda boring even though I know it's as light as my Konigs.
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
[A]aronLJW;1064694958 said:
Nope not me, I'm on 16 inch S1 but planning on 17" S1 in the future.



Will occasionally hang out here, thanks to LSM1991 drag me here haha
eik...... nono i have been good....

s1's and s5's..... have been poisoned by these 2 rims.......
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
Thanks Aaron, stick around. Some people here like me want to explore alternative rims. Hehe.. Does Advanti have any sort of "deep dish" or something type of design rather than the "flat" S1 design? I used to use this rim



and it had a slight positive offset which made it interesting. But unfortunately I found Konig kinda susceptible to knocks and dings so swapped to the S1. But the S1 is kinda boring even though I know it's as light as my Konigs.
im not sure but i was told, there are basically 2 very good velue for $ rims advanti makes, the storm series s1 and s5

and at best i guess you can get a dif offset so that the spokes curve inwards more?
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
honestly have no idea whats the details of that particular set, dont think it would fit onto my car....
 

m a v [3] r i c k

9,000 RPM
Senior Member
Thread starter
Nov 21, 2003
9,074
27
3,148
KL
Visit site
Bro Izso,
I spoke to the sales guy and seems that for 17" they can't do the offset style due to strength issue. As you can see, the spokes are really fine. But for 15", they do have them in concave design. Perhaps you can FB message Advanti Racing Malaysia. He's been very very helpful. Managed to get my 17" S1 gunmetal thru his help.
 

lsm1991

1,000 RPM
Senior Member
Sep 30, 2011
1,469
185
1,663
PJ
m a v [3] r i c k;1064695084 said:
Bro Izso,
I spoke to the sales guy and seems that for 17" they can't do the offset style due to strength issue. As you can see, the spokes are really fine. But for 15", they do have them in concave design. Perhaps you can FB message Advanti Racing Malaysia. He's been very very helpful. Managed to get my 17" S1 gunmetal thru his help.
wait really?? NUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!!!!!!!!!!!!!!
 

m a v [3] r i c k

9,000 RPM
Senior Member
Thread starter
Nov 21, 2003
9,074
27
3,148
KL
Visit site
Yeah...Perhaps the S5 can cos it's got a lot more spokes. Better message the distributor for a more accurate info.
 

[A]aronLJW

Junior Member
Feb 2, 2017
14
5
3
Thanks Aaron, stick around. Some people here like me want to explore alternative rims. Hehe.. Does Advanti have any sort of "deep dish" or something type of design rather than the "flat" S1 design? I used to use this rim



and it had a slight positive offset which made it interesting. But unfortunately I found Konig kinda susceptible to knocks and dings so swapped to the S1. But the S1 is kinda boring even though I know it's as light as my Konigs.
Haha I'll try stick around here, what car are you using? Usually deep dish rim are wider J and require offset 20 - 35, Storm S1 have concave 15x8, 15x9, 17x8, 17x9 but not popular in Malaysia market and is super rare to get it here. Actually the normal S1 we get here is already concaved in slightly compare to other rims that I come through.
 

ixeo

4,000 RPM
Senior Member
Jun 26, 2005
4,788
3,080
5,213
KL, Malaysia
m a v [3] r i c k;1064695084 said:
Bro Izso,
I spoke to the sales guy and seems that for 17" they can't do the offset style due to strength issue. As you can see, the spokes are really fine. But for 15", they do have them in concave design. Perhaps you can FB message Advanti Racing Malaysia. He's been very very helpful. Managed to get my 17" S1 gunmetal thru his help.
Picture on wheels mari! Congrats! Good buy.
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
[A]aronLJW;1064695137 said:
Haha I'll try stick around here, what car are you using? Usually deep dish rim are wider J and require offset 20 - 35, Storm S1 have concave 15x8, 15x9, 17x8, 17x9 but not popular in Malaysia market and is super rare to get it here. Actually the normal S1 we get here is already concaved in slightly compare to other rims that I come through.
You have concave S1 17x8JJ? Wahhhh.. how much and where to get? The guy I dealt with didn't give me that option. I'm using a Nissan Sylphy so I need PCD100x4. 9jj is too wide for me already. And I need to clear my calipers
 

[A]aronLJW

Junior Member
Feb 2, 2017
14
5
3
You have concave S1 17x8JJ? Wahhhh.. how much and where to get? The guy I dealt with didn't give me that option. I'm using a Nissan Sylphy so I need PCD100x4. 9jj is too wide for me already. And I need to clear my calipers
Oh 17x8J is for 5x114.3 S1 and S5.. 4x100 only have 17x7J ET40, you can come by to fix the rims to test whether can clear your caliper. Special 8J above need to check with supplier 1st.
 

Random Post Every 5 Minutes



The self-styled world cup of motorsports, the A1GP, had a decent formula that could have seen it reach that status had the spec-racing series stuck around longer. It pitted national teams against each other with identical Ferrari-powered chassis on circuits all around the world. Nonetheless, financial turmoil never really left the series and it was liquidated at the end of the 2009 season.

Since the series...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience