What average EVO water temp ?

dkny

Known Member
Jul 1, 2013
211
10
518
Kuala Lumpur
Just want to know, what is the average water temp for Evo ?

Oil temp also, if anyone could share here.

Mine
Water temp : 80~95 c
Oil Temp : 80-90 c
 

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
looks like a stopper. I've experienced it once, stopper leaks, temp rise to 105, lucky water temp gauge gave audible warning. stop aside.

this rubber stopper doesn't last long.
changed to silicon, and bought a few just for emergency case.
 

dkny

Known Member
Thread starter
Jul 1, 2013
211
10
518
Kuala Lumpur
I wonder, why need this stopper ? What the function of this, as I see it only seal a useless hole from radiator?
 

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
hah thats a very good question. I also don't know whats the purpose actually. to drain water maybe? or to recirculate the water when doing engine flush or servicing?
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
hah thats a very good question. I also don't know whats the purpose actually. to drain water maybe? or to recirculate the water when doing engine flush or servicing?
The cooling system differs from country to country. Certain points are not used so they use a stopper to block those not in use. You will find another few even on the engine...
 

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
yes i agree with u. in fact the stopper that gave away on my previous ride was not on the radiator...it was on the engine, below the intake manifold, facing the firewall...quite hard to dismantle it.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
yes i agree with u. in fact the stopper that gave away on my previous ride was not on the radiator...it was on the engine, below the intake manifold, facing the firewall...quite hard to dismantle it.
Look out for those other tubes too. If the stopper rubber can harden and crack, those will also. The tube use to heat the inlet manifold auto choke, the U turn bypass tube and so on....
 

MKMD428

500 RPM
Senior Member
Aug 21, 2005
876
190
5,043
johore
Look out for those other tubes too. If the stopper rubber can harden and crack, those will also. The tube use to heat the inlet manifold auto choke, the U turn bypass tube and so on....
much appreciated. thanks bro.
 

Random Post Every 5 Minutes

frenz....

i need to know about how much market selling halfcut for 4G92 MIVEC....??

anybody know??
the prize will include what parts??
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience