Vios to Altezza

Mar 28, 2020
3
0
1
Hi to all altezza sifus and members :hello:,

I'm planning to join the big boys of the toyota family with an Auto one (RS200) around 30k. Though im earning around 3k myr with no obligations. So, planning to get it by selling off my Vios (Gen 1) G spec and personal loan top-up.

From my understanding of the altezza bible from sifu AE111GT, the maintenance are almost same compared to my Vios (oil filter, gearbox oil, iridium plugs, etc.). Except, it needs 5 Litre Full-syn engine oil change and timing belt change. While my oil change are done in Dtox with 4 litre and timing chain. Also, I always budget my petrol RM 100 a week and travel 50km (Two-way travel) a day to work.
So, if the maintenance are around the same, i was thinking of upgrading to this lovely car :driver:...

Except i noticed Tezza has a 60 litre fuel tank clocking 400 - 500km, while my Vios clocks 400km+ (45 Litre). Secondly, Wear and tear parts such as the Suspension set-up (D. Wishbones), Absorbers, Bushing, are 500% more costly compared to vios.

Just an opinion from you all:
1) Do these Wear and tear parts of this car spoil VERY often?? like say 1 to 2 years gone case?
2) Any more things too look out when owning a Tezza (RWD) as compared with a vios (FWD)?
3) Rear differential oil change expensive?
4) G2 and G4 got alot difference in terms of performance?
5) Is it reasonable to get this car based on my situation?

Sorry if its a long post and alot questions. but i've been desiring to get one since i saw one in Puchong (TRD bodykit). I hope any sifu or advisers can give me a good opinion.. I'm looking for a fun daily and reliable ride. Thanks all. :adore:

P.S. Newbie here and first time posting in a forum. Sorry if i violate any thread rules. PM me if i do :confused:
 
Last edited:

brokenjars

Known Member
Senior Member
Jun 7, 2012
229
16
1,518
Kedah
As with all old cars, there will be some wear and tear. So prepare some cash to replace the worn parts. As usual, change all the lubricants and liquids just in case. And you might have to wait for parts during downtime meaning no car for few days when parts do break down since this car is quite rare.
However toyota is quite reliable la. Previously owned the smaller brother, toyota SEG AE101 with 20v blacktop engine, 6mt gearbox. And as expected, I kena chopped/cheated by mechanics along the way since I'm naive and knows nuts in the beginner. But its worth it for me.
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,998
8,385
1,713
Petaling Jaya
Agree with bro. brokenjars, as older car will have more wear ans tear, so not sure what other parts may need repair/replace in the near future. Maintenance like oil and filter almost the same with most car, even my turbo 4G63T just change oil and filter only.....
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
Hi to all altezza sifus and members :hello:,

I'm planning to join the big boys of the toyota family with an Auto one (RS200) around 30k. Though im earning around 3k myr with no obligations. So, planning to get it by selling off my Vios (Gen 1) G spec and personal loan top-up.

From my understanding of the altezza bible from sifu AE111GT, the maintenance are almost same compared to my Vios (oil filter, gearbox oil, iridium plugs, etc.). Except, it needs 5 Litre Full-syn engine oil change and timing belt change. While my oil change are done in Dtox with 4 litre and timing chain. Also, I always budget my petrol RM 100 a week and travel 50km (Two-way travel) a day to work.
So, if the maintenance are around the same, i was thinking of upgrading to this lovely car :driver:...

Except i noticed Tezza has a 60 litre fuel tank clocking 400 - 500km, while my Vios clocks 400km+ (45 Litre). Secondly, Wear and tear parts such as the Suspension set-up (D. Wishbones), Absorbers, Bushing, are 500% more costly compared to vios.

Just an opinion from you all:
1) Do these Wear and tear parts of this car spoil VERY often?? like say 1 to 2 years gone case?
2) Any more things too look out when owning a Tezza (RWD) as compared with a vios (FWD)?
3) Rear differential oil change expensive?
4) G2 and G4 got alot difference in terms of performance?
5) Is it reasonable to get this car based on my situation?

Sorry if its a long post and alot questions. but i've been desiring to get one since i saw one in Puchong (TRD bodykit). I hope any sifu or advisers can give me a good opinion.. I'm looking for a fun daily and reliable ride. Thanks all. :adore:

P.S. Newbie here and first time posting in a forum. Sorry if i violate any thread rules. PM me if i do :confused:
Altezza maintenance is higher than Vios. By a lot. RWD has diff and assuming you want a manual, the manual oil is going to be more expensive than the Toyota type-IV oil. And the age of the Altezza alone will make it expensive to maintain. But still cheaper than a stupid Nissan Sylphy G14.

The newer G4 is better than the G2 purely because of age. The bigger the number the newer the engine. Also the G1, 3 and 5 3SGE Beams engines are manuals, G2 and 4 are autos. Personally I hate the autos because there is almost no low end torque and revving an auto to high RPMs is just sad.

Also finding a 30k Altezza probably means it's a beat up RS200 with a 1GFE 6-cylinder. I recommend the 3SGE Beams models not the 1GFE ones unless you plan to do engine swap. The 1GFE is really old and costs way more to maintain due to age and 2 extra cylinders. The Beams engine is a rev happy engine and pretty needs to be revved a lot to get the best out of the engine so the auto is not the ideal transmission.

Other than that the interior bits and pieces are not cheap to buy too so make sure your interior isn't damaged.

If you're not sure how to check all these things, the Trial guys in Sg Besi can help you check the car as they are Altezza pros. Either meet the seller at their shop or hire one of the mechs to go inspect the car for you.
 

alcyon

500 RPM
Sep 13, 2015
800
153
543
Kuala Lumpur
2) Any more things too look out when owning a Tezza (RWD) as compared with a vios (FWD)?
RWD FC will be higher than vios. Extra rotational weight as well as extra overall weight. Altezza about 1350kg while vios is like 200kg lighter + fwd.
 

Wayne_92

Thread starter
Mar 28, 2020
3
0
1
Thanks for all the replies from the taikors, sifus and enthusiasts :beer:

And you might have to wait for parts during downtime meaning no car for few days when parts do break down since this car is quite rare.
I see, if thats the case then kinda defeat the purpose of daily driving if need to sit in the workshop. Just wondering if the parts can last or have to wait long like Continental cars?

Previously owned the smaller brother, toyota SEG AE101 with 20v blacktop engine, 6mt gearbox. And as expected, I kena chopped/cheated by mechanics along the way since I'm naive and knows nuts in the beginner. But its worth it for me
Thats a sweet car man, always like the rally looking body and the round fog lights. Same here, gullible and didnt do research about my vios before going workshop. Guess we all have to start somewhere:dontknow:.. but thanks for the advice and sharing your experience brokenjar. Glad to hear you gain something positive about it..

Agree with bro. brokenjars, as older car will have more wear ans tear, so not sure what other parts may need repair/replace in the near future. Maintenance like oil and filter almost the same with most car, even my turbo 4G63T just change oil and filter only.....
Ahh okay. will definitely look out for it. but dang 4G63T, Thats one powerful engine wei. :rock:

Altezza maintenance is higher than Vios. By a lot. RWD has diff and assuming you want a manual, the manual oil is going to be more expensive than the Toyota type-IV oil. And the age of the Altezza alone will make it expensive to maintain. But still cheaper than a stupid Nissan Sylphy G14.

The newer G4 is better than the G2 purely because of age. The bigger the number the newer the engine. Also the G1, 3 and 5 3SGE Beams engines are manuals, G2 and 4 are autos. Personally I hate the autos because there is almost no low end torque and revving an auto to high RPMs is just sad.

Also finding a 30k Altezza probably means it's a beat up RS200 with a 1GFE 6-cylinder. I recommend the 3SGE Beams models not the 1GFE ones unless you plan to do engine swap. The 1GFE is really old and costs way more to maintain due to age and 2 extra cylinders. The Beams engine is a rev happy engine and pretty needs to be revved a lot to get the best out of the engine so the auto is not the ideal transmission.

Other than that the interior bits and pieces are not cheap to buy too so make sure your interior isn't damaged.

If you're not sure how to check all these things, the Trial guys in Sg Besi can help you check the car as they are Altezza pros. Either meet the seller at their shop or hire one of the mechs to go inspect the car for you.
Ah okay, i noticed "Trial" name always pop up when altezza is mentioned. will definitely pay them a visit, thats is after MCO ah :laugh:. Good to know there is a specialist out there for Tezza. Thanks for your opinion and recommendation bro Izso. Btw, is it recommended to Only service the car there? or can simply go any workshop to service a Tezza?

https://www.mudah.my/Toyota+ALTEZZA+2+0+RS200+A+2001-81613873.htm

Can quite confirm its a 3S-GE engine i guess? cause the one im looking at Mudah has a "G4" sticker on the engine cover and "Blacktop". but correct me if im wrong bro.

Yeah.. can see its gonna be more costly in terms of spare part. Totally understand your point to opt for a manual as i heard about the sluggish feeling during low rpm for this car. Plus with it being an auto, usually that would turn-off most spirited drivers.

But im usually a casual driver, park near mamaks, relek my legs during traffic jams but with slight tendency to throttle abit more when having a clear road or when its late night :biggrin:. Been driving my car for 5 years+, Just feeling the need to have a lil oomph of power in driving now . Plus I'm just digging the conti-car look with a reliability of a Toyota with alot of modding capabilities if swapped to 1jz or manual swap. That one later when got $$ ah, now drive stock 1st. hahah.
Hopefully can get a chance to test drive one before deciding to buy one :driver:.

"Though, it's fine if dont high rev the 3S-GE engine often? or is it a must to High revved it to avoid issues like the rumoured RX-8 Flooding?"

Edit: oh nvm, just read your previous Altezza FAQ post on this question. high rev to remove Carbons.

2) Any more things too look out when owning a Tezza (RWD) as compared with a vios (FWD)?
RWD FC will be higher than vios. Extra rotational weight as well as extra overall weight. Altezza about 1350kg while vios is like 200kg lighter + fwd.
Ahh i see.. cause i read most altezza owners say FC not bad for 2.0L car, Like can clock 500KM+. But thats like when the car is still 2 years+ of age ah. Not sure still same mileage now after 20 Years. :confused:

True, vios is close about 1000kg+ (Inclusive of my weight). haha. I guess getting the car have to sacrifice the FC.. But RWD though.. :biggrin:
 
Last edited:

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
I see, if thats the case then kinda defeat the purpose of daily driving if need to sit in the workshop. Just wondering if the parts can last or have to wait long like Continental cars?
It's a Toyota. Parts are not that easy to wear down if you change everything properly and not skimp on maintenance.

Ah okay, i noticed "Trial" name always pop up when altezza is mentioned. will definitely pay them a visit, thats is after MCO ah :laugh:. Good to know there is a specialist out there for Tezza. Thanks for your opinion and recommendation bro Izso. Btw, is it recommended to Only service the car there? or can simply go any workshop to service a Tezza?
No la. You don't have to go to Trial for everything but since they deal with Altezzas so often they probably can diagnose something better than what other shops are capable of. It's an ordinary RWD Toyota. The maintenance is pretty much the same as any VVTI Toyota except where the things are located and strengths/weaknesses.

Can quite confirm its a 3S-GE engine i guess? cause the one im looking at Mudah has a "G4" sticker on the engine cover and "Blacktop". but correct me if im wrong bro.

Yeah.. can see its gonna be more costly in terms of spare part. Totally understand your point to opt for a manual as i heard about the sluggish feeling during low rpm for this car. Plus with it being an auto, usually that would turn-off most spirited drivers.

But im usually a casual driver, park near mamaks, relek my legs during traffic jams but with slight tendency to throttle abit more when having a clear road or when its late night :biggrin:. Been driving my car for 5 years+, Just feeling the need to have a lil oomph of power in driving now . Plus I'm just digging the conti-car look with a reliability of a Toyota with alot of modding capabilities if swapped to 1jz or manual swap. That one later when got $$ ah, now drive stock 1st. hahah.
Hopefully can get a chance to test drive one before deciding to buy one :driver:.
Test drive first. I started off with an auto Wira and did a lot to increase the torque and performance of the car before finally going to a manual. My personal feeling is the Altezza auto is weaker than my modded 1.5L NA Wira. You talk about throttle a little bit - when I test drove the car I literally pedal flat down a lot just to move with the 4 people in the car including me. It's easy to drive slow but you will get super annoyed everytime you want to overtake. It's so low in torque.... so slow.... Anyway I test drove the manual a few times and I can guarantee you will love the manual so much more than the weak ass auto 3SGE G2/G4 tezzas.

Incidentally there's a 1JZ Altezza in mudah right now. Should have a look at that car or the manuals. But if you look at the 1JZ make sure it's done properly with the right cross member, fuel line routing and wiring isn't a hack job. I recommend Wan N Lin workshop if you're gonna see the JZ cuz these guys play with JZ converts so often they saw all the problems with my ex-car without even jacking up the car. I can recommend the head mech to you if you want.

Ahh i see.. cause i read most altezza owners say FC not bad for 2.0L car, Like can clock 500KM+. But thats like when the car is still 2 years+ of age ah. Not sure still same mileage now after 20 Years. :confused:

True, vios is close about 1000kg+ (Inclusive of my weight). haha. I guess getting the car have to sacrifice the FC.. But RWD though.. :biggrin:
How much mileage the car can go (500km+) is not a good way to determine FC. The tank for the Altezza IIRC is 60L so if it runs 500km it's expected. And it's a RWD so FC will not be fantastic like the Vios. It's a 2.0 so if you can average 8-9km/L it's pretty decent already especially for a RWD. A Vios can easily get 12-15km/L depending on the model and driving style. So expect to pay more for fuel and sacrifice rear legroom.

Overall Tezzas are fantastic cars, a little cramp in the rear legroom area but otherwise it's reliable, relatively cheap to maintain for a RWD car and holds its used car price very well. Parts are still plentiful and if you go to the right shop the maintenance can be very easily sorted for you. Just buy the right car and you'll be fine but make sure you test drive the car.
 

alcyon

500 RPM
Sep 13, 2015
800
153
543
Kuala Lumpur
But im usually a casual driver, park near mamaks, relek my legs during traffic jams but with slight tendency to throttle abit more when having a clear road or when its late night :biggrin:. Been driving my car for 5 years+, Just feeling the need to have a lil oomph of power in driving now . Plus I'm just digging the conti-car look with a reliability of a Toyota with alot of modding capabilities if swapped to 1jz or manual swap. That one later when got $$ ah, now drive stock 1st. hahah.
Then IMHO, auto is fine..
 

Mitevo7

1,000 RPM
Senior Member
Jan 14, 2008
1,456
179
3,163
Altezza is pretty rare nowadays, the 2.0 BEAMS engine is excellent if it pairs with a manual, automatic A650e is pretty ok for town drive but it will not be torquey. Given to our traffic nowadays, an automatic car serves better purpose for DD, unless you are hardcore, then go for manual.

Thanks,
Ken
 

ixeo

4,000 RPM
Senior Member
Jun 26, 2005
4,788
3,080
5,213
KL, Malaysia
If you’re going for an AUTOMATIC, might as well get an E90 325i with an in-line straight 6 engine with a ZF 6 speed automatic.

That screaming BEAMS engine isn’t all that fun without a manual, and since you’re a casual driver, no 4 banger comes close to the in-line 6 for smoothness.

Also, the current ZF 8 speed automatic used across all BMW is the best automatic transmission in the market right now. Period. The E90 is using the predecessor ZF 6 speed, which was the best 6 speed of its time. Not as seamless as the 8 speed, but still very good. So if you want an auto, why not get the best one for its time.

If you want godlike fuel efficiency, the E90 320d. If you cover a lot of KMs then get this for sure.

Next thing people will talk about reliability, cost of maintenance etc. For such an old car, both the Altezza and BMW, wear and tear is certainly there. Lots of things need replacement, rubber parts, AC coil, radiator etc. Oh for the same money I believe the BMW will be a younger car than Altezza.

Now comes the argument of the badge, Toyota vs BMW. Usually, Toyota is easy to maintain, due to abundance of spare parts in Malaysia, and ease of maintenance. That being said, comparing a Vios and Altezza is far fetched. Parts for Vios is super easy to come by, you can be stranded in Kota Bharu and still able to easily get spare parts there, worse case scenario you can go to UMW Toyota there. But remember you can’t do the same with an Altezza. Whereas with the E90, it was sold here in Malaysia, so there are still BMW specialists all over Malaysia that service it and carries parts for it. Don’t go to BMW dealerships they will slaughter you.

With your income and budget, DO NOT get a modified car. Maintaining a stock one at this age will not be easy. Getting a modified one will end up #1jzparking
 
  • Like
Reactions: Izso

Mitevo7

1,000 RPM
Senior Member
Jan 14, 2008
1,456
179
3,163
If you’re going for an AUTOMATIC, might as well get an E90 325i with an in-line straight 6 engine with a ZF 6 speed automatic.

That screaming BEAMS engine isn’t all that fun without a manual, and since you’re a casual driver, no 4 banger comes close to the in-line 6 for smoothness.

Also, the current ZF 8 speed automatic used across all BMW is the best automatic transmission in the market right now. Period. The E90 is using the predecessor ZF 6 speed, which was the best 6 speed of its time. Not as seamless as the 8 speed, but still very good. So if you want an auto, why not get the best one for its time.

If you want godlike fuel efficiency, the E90 320d. If you cover a lot of KMs then get this for sure.

Next thing people will talk about reliability, cost of maintenance etc. For such an old car, both the Altezza and BMW, wear and tear is certainly there. Lots of things need replacement, rubber parts, AC coil, radiator etc. Oh for the same money I believe the BMW will be a younger car than Altezza.

Now comes the argument of the badge, Toyota vs BMW. Usually, Toyota is easy to maintain, due to abundance of spare parts in Malaysia, and ease of maintenance. That being said, comparing a Vios and Altezza is far fetched. Parts for Vios is super easy to come by, you can be stranded in Kota Bharu and still able to easily get spare parts there, worse case scenario you can go to UMW Toyota there. But remember you can’t do the same with an Altezza. Whereas with the E90, it was sold here in Malaysia, so there are still BMW specialists all over Malaysia that service it and carries parts for it. Don’t go to BMW dealerships they will slaughter you.

With your income and budget, DO NOT get a modified car. Maintaining a stock one at this age will not be easy. Getting a modified one will end up #1jzparking
E90, E90, E90, E90 ........... the one that got away :(

Put both Altezza and E90 325i side by side, i will jump into E90 anytime.
 

alcyon

500 RPM
Sep 13, 2015
800
153
543
Kuala Lumpur
If you’re going for an AUTOMATIC, might as well get an E90 325i with an in-line straight 6 engine with a ZF 6 speed automatic.

That screaming BEAMS engine isn’t all that fun without a manual, and since you’re a casual driver, no 4 banger comes close to the in-line 6 for smoothness.

Also, the current ZF 8 speed automatic used across all BMW is the best automatic transmission in the market right now. Period. The E90 is using the predecessor ZF 6 speed, which was the best 6 speed of its time. Not as seamless as the 8 speed, but still very good. So if you want an auto, why not get the best one for its time.

If you want godlike fuel efficiency, the E90 320d. If you cover a lot of KMs then get this for sure.

Next thing people will talk about reliability, cost of maintenance etc. For such an old car, both the Altezza and BMW, wear and tear is certainly there. Lots of things need replacement, rubber parts, AC coil, radiator etc. Oh for the same money I believe the BMW will be a younger car than Altezza.

Now comes the argument of the badge, Toyota vs BMW. Usually, Toyota is easy to maintain, due to abundance of spare parts in Malaysia, and ease of maintenance. That being said, comparing a Vios and Altezza is far fetched. Parts for Vios is super easy to come by, you can be stranded in Kota Bharu and still able to easily get spare parts there, worse case scenario you can go to UMW Toyota there. But remember you can’t do the same with an Altezza. Whereas with the E90, it was sold here in Malaysia, so there are still BMW specialists all over Malaysia that service it and carries parts for it. Don’t go to BMW dealerships they will slaughter you.

With your income and budget, DO NOT get a modified car. Maintaining a stock one at this age will not be easy. Getting a modified one will end up #1jzparking
Ok i guess, assuming this car will fit into his 30k budget.
 

ixeo

4,000 RPM
Senior Member
Jun 26, 2005
4,788
3,080
5,213
KL, Malaysia
E90, E90, E90, E90 ........... the one that got away :(

Put both Altezza and E90 325i side by side, i will jump into E90 anytime.
Well, if it was a manual Altezza vs a E90 325i automatic. I may consider the Altezza. Automatic? Forget it, the ZF 6 speed all the way.

Ok i guess, assuming this car will fit into his 30k budget.
The cheapest Altezza is 30k on mudah, most expensive 47k. And you cannot assume you will buy the 30k one, maybe accident car, got problems. You have to take the average. And they are manufactured up to 1999 to 2004. The ones for sale is up to 2003.

BMW E90 325i you have the pre-LCI models from 2004-2008, and LCI from 2008 to 2011. You can easily assume the BMW is going to be a younger car. Don't start with the Toyota is more reliable bullshit, rubber is rubber, it falls apart over time and its a wear and tear item. Just because its Toyota rubber doesn't make it invincible.

You can easily find 2006 to 2008 ones for RM30k range.

@ixeo The bmw E90 has same maintenance cost as Altezza? I always though bmw parts are super expensive..
Depends. Altezza is not your pedestrian Toyota. That engine is not shared with any other car (yes I know many Toyota uses the 3SGE, but the Tezza one is special.). Plus most of the parts on the Altezza is exclusive for Altezza. There's not that many in Malaysia and it was not sold locally (compared to E90).

The Altezza parts are cheaper by than the BMW. The only concern I have is parts availability. My household have a 2000 Suzuki Vitara. I can tell you, its reliable, yes, but at 15 years of ownership, rebuild the engine, and suspension arms, many parts have to special order. Have to pay and have to wait. Stupid irritating and waste of my time. Sure, common items like water pump, cooling coil, these are all ready stock as it is common wear and tear, but some like lower arm was just out of stock then have to order. And since Suzuki is dead here, there's no official dealership, and they didn't sell in large quantities, so parts is a problem.

The E90 on the other hand, was sold for 7 years, and it's quite a common car. Plus the dealership would still have parts (since they sold it) but they will slaughter you for it. But many specialists carry it, from KL to Penang to Perak, you can find parts easily.

Let's try ignition coil plug. A common item, wear and tear. In Mudah, I found 0 Altezza coil plugs, but plenty of E90 ones. I tried Lazada comparing LOCAL VENDORS ONLY, you can have E90 Delphi coil plug for RM128, Bosch for RM105, and FLAMMA coil plug for Altezza for RM95.

Cooling coil/evaporator, another common wear and tear part. E90 you have Denso for RM580, some local brand RM128. Altezza RM350, the same local brand RM128.

In any case, all this wear and tear items is on its way out. It just a game of chance, and what was replaced on the car before you bought it.
 
  • Like
Reactions: DNGFashion

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
E90, E90, E90, E90 ........... the one that got away :(

Put both Altezza and E90 325i side by side, i will jump into E90 anytime.
SAME... :biggrin:

@ixeo The bmw E90 has same maintenance cost as Altezza? I always though bmw parts are super expensive..
Not really. Using reputable parts sellers like Bavarian-Auto and Innerpower, you can get cheaper parts. The parts were surprisingly cheap and I had a e36 and e90 (for a super short while) so when I found these parts sellers their parts are 40% - 50% cheaper than what you see outside. Parts are original or OEM replacement parts. But this applies to e36, 46 and 90 generation cars. The newer F and G series are expensive. The only reason why BMWs are expensive to maintain is because the service intervals are shorter and you can't skimp. If it says change a gasket you better change the gasket. Don't say "oh it's not leaking no need to change". This will make a regular BMW service into a nightmare scenario.

Also the name "3SGE" and "Altezza" automatically jacks up prices like how "Supra" parts are not that cheap even though Toyota. But having said that the service intervals for Toyotas vs BMWs differ quite a bit and parts that need changing is significantly less in a Toyota hence 'cheaper'.

Ok i guess, assuming this car will fit into his 30k budget.
This is a very good point. Regardless whether it's a 30k Altezza or a 30k BMW E90, at 30k it's most likely the car is going to need at least 10-15k repairs. But you probably could get away with a really really good E36/46 for 30k.
 

Random Post Every 5 Minutes



It would appear that pole-to-flag victories was the theme this weekend as Lucas Auer did just that, following in the steps of Sebastian Vettel and Dilantha Malagamuwa, to win Race 2 of the JK Racing Asia Series at the Sepang International Circuit that served as a support race for Formula One.

The Austrian managed to stave off Afiq Yazid and...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience