vibration from 80 to 100 kmh

kaninbu

500 RPM
Senior Member
Dec 2, 2008
669
104
1,543
KL
worn out bushes will cause vibration.any rubber made parts r mostly acts as dampener.not only sway left n right....:)
 

james3399

Known Member
Senior Member
Thread starter
Jul 20, 2009
154
7
1,518
jb
BRO Nurul771 DID U LOWERED UR RIDE??IF YES RAISE BACK TO ORI HEIGHT ALL THE THING SOLVE
 

awie5940

Known Member
Jan 6, 2014
51
3
508
Selangor
Hello.. I am from future.. Hahaha.. Alsi having this problems. Vibration during 60kmh-100kmh..already changed rack j end tie rod end, allignment 3 times, replaced longshaft..
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,998
8,385
1,713
Petaling Jaya
Hello.. I am from future.. Hahaha.. Alsi having this problems. Vibration during 60kmh-100kmh..already changed rack j end tie rod end, allignment 3 times, replaced longshaft..
Have checked your rims for dents, are the rims fitted to match the hub perfectly, if not may need the center cones. What about wheel balancing, and last resort on wheel balancing. Oh, there is a new balancing method too, road force balancing......
 

awie5940

Known Member
Jan 6, 2014
51
3
508
Selangor
Have checked your rims for dents, are the rims fitted to match the hub perfectly, if not may need the center cones. What about wheel balancing, and last resort on wheel balancing. Oh, there is a new balancing method too, road force balancing......
Will try to swap rim with my friend. Yeah.. I also put 1 pcs spacer each rim. Will try to remove them. Tq bro
 

gunnerzz

2,000 RPM
Jul 3, 2014
2,109
695
713
38
Melaka
If all else fail, head to Rahang lama and find Ah Ching or Ah Cheng shop to do on wheel ballancing. I do believe there are others specialist nearer to u but this is the one that i know of.
Did that for my blm after few tire shop fail to solve vibration issue. This was more than 5 years ago. Was kinda shy when i arrived as i drove the cheapest and superstock (by a large margin...very large margin) car to the shop...hahahahah.
What i notice was that he spins the tires much faster than other tire shop and he feel for vibration using his hands by placing his hand on various parts of the car such as bumpers, absorbers, etc.
 

vr2turbo

Beyond 20,000 RPM!
Helmet Clan
Moderator
May 11, 2010
29,998
8,385
1,713
Petaling Jaya
If all else fail, head to Rahang lama and find Ah Ching or Ah Cheng shop to do on wheel ballancing. I do believe there are others specialist nearer to u but this is the one that i know of.
Did that for my blm after few tire shop fail to solve vibration issue. This was more than 5 years ago. Was kinda shy when i arrived as i drove the cheapest and superstock (by a large margin...very large margin) car to the shop...hahahahah.
What i notice was that he spins the tires much faster than other tire shop and he feel for vibration using his hands by placing his hand on various parts of the car such as bumpers, absorbers, etc.
Have seen a few in PJ also, these are really experience people. But for me, now I prefer off wheel balancing. If need to remove wheel for some repairs later fit back less hassle. On wheel, most of the time even mark back same lug place still tent to run a bit.....lol
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL

Random Post Every 5 Minutes

Hi guys, I'm planning to do 1.3 piston conversion to my 1.6 campro.

The workshop guy said he needs to open the block to check and see if there is any freeplay of the pistons, if so, the block needs to be rebored either 0.5 to 1mm.

Is it safe to rebore block? Or is it even safe to bump the compression of my campro? thanks guys :adore:

Can increase compression without management ma?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience