Superior Sound And Noise Dampening Products

sanlee

Junior Member
Senior Member
Aug 1, 2005
16
0
1,501
PJ
Full range of superior automotive Noise and Vibration supression products.
Visit http://www.soundblok.com/

very competitive prices only from me... [email protected]

Acoustic Damping Mat's (34" X 48") RM120

Promat-5 (4pcs 24" X 32") RM450 (dynamat eq.)

Supression Pads (10pcs) very effective RM45

NanoBlok (latest nano-technology odor & bacterial photocatalytic coating protection to your vehicle) RM18.50
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
Thank You for your interest in my product but sorry huakenny...I don't have the full range of soundblok products.
Listed are bought in huge quantity (over stocked) and now selling at very low price. Dumping off over the net to recover capital..

As for the nanoblok, can be negotiate depending on quantity loh...
 

huakenny

LB Performance
Senior Member
Feb 24, 2005
9,126
240
3,163
Kota Kinabalu
Visit site
sanlee said:
Thank You for your interest in my product but sorry huakenny...I don't have the full range of soundblok products.
Listed are bought in huge quantity (over stocked) and now selling at very low price. Dumping off over the net to recover capital..

As for the nanoblok, can be negotiate depending on quantity loh...

so one kenari need how many can?

and one subaru impreza need how many can?

can i do this myself?

quote for me...PM me...
 

khguan

4,000 RPM
Senior Member
Aug 17, 2004
4,818
26
3,148
Seri Kembangan
fotopic.net
i have used de suppresion pads from soundblok bought a few year ago on my doors... nice stuff...

do u have anything dat is similar to dynamatt extreme?? price n size??
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
The Flexmat is equivalent to Dynamat Extreme but it's twice the thickness of Dynamat Extreme.
I don't really carry much of this. But have some in stock.
Dumping off price (8" X 36") RM60 :smile:
 

nuggyn

Known Member
Senior Member
Feb 12, 2004
309
2
3,018
sanlee said:
Full range of superior automotive Noise and Vibration supression products.
Visit http://www.soundblok.com/

very competitive prices only from me... [email protected]

Acoustic Damping Mat's (34" X 48") RM120

Promat-5 (4pcs 24" X 32") RM450 (dynamat eq.)

Supression Pads (10pcs) very effective RM45

NanoBlok (latest nano-technology odor & bacterial photocatalytic coating protection to your vehicle) RM18.50



the supression pads....10 pieces for RM45?? are these bitumen pads? how thick?
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
nuggyn said:
the supression pads....10 pieces for RM45?? are these bitumen pads? how thick?
3mm thickness same as Wurth type
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
Price quoted are cheapest in town for real acoustic products ...Limited stock only...Lelong-lelong.... :biggrin:
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
SoundBlok Noise & Vibration Suppression Pad is a self-adhering vibration & resonance defeating material that is applied onto a vehicle’s door, roof, fender & rear quarter panel to suppress structural, engine & road borne vibrations. The convenient hand sized pads are ready to use with one surface coated with pressure sensitive adhesive that can be applied onto any panel, resulting in a good degree of noise and vibration control in a vehicle. It can also be added-on to bolster dampening points in the passenger compartment where the original melting sheets are too sparingly applied or are omitted altogether. It is made from a plastomeric based compound that is reinforced internally by a polyester fabric and has a protective polyethylene top surface layer.

All details regarding product can be found here www.soundblok.com
 

nuggyn

Known Member
Senior Member
Feb 12, 2004
309
2
3,018
sanlee said:
SoundBlok Noise & Vibration Suppression Pad is a self-adhering vibration & resonance defeating material that is applied onto a vehicle’s door, roof, fender & rear quarter panel to suppress structural, engine & road borne vibrations. The convenient hand sized pads are ready to use with one surface coated with pressure sensitive adhesive that can be applied onto any panel, resulting in a good degree of noise and vibration control in a vehicle. It can also be added-on to bolster dampening points in the passenger compartment where the original melting sheets are too sparingly applied or are omitted altogether. It is made from a plastomeric based compound that is reinforced internally by a polyester fabric and has a protective polyethylene top surface layer.

All details regarding product can be found here www.soundblok.com

what's the size of the suppression pad? width and length?
thickeness?
 

sanlee

Junior Member
Senior Member
Thread starter
Aug 1, 2005
16
0
1,501
PJ
nuggyn said:
what's the size of the suppression pad? width and length?
thickeness?
It's 180mm X 90mm X 3mm.../pcs.

I have also the ProPads..200mm X 100mm X 5mm RM85 for 10pcs.
 

Random Post Every 5 Minutes

Sorry, I got issues with spelling.

So yeah, thoughts about this car? Yes this thread is directed at an individual who recently contracted STD. Our very own izso!

Is the CVT boring?
Does the cornering ability makes you clench your butt cheeks?
Does the engine drone constantly being maintained ~3000rpm for peak torque by the CVT?

Tell us more!
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience