Rm8k Wira & Jazz GK5 ownership experience-A long way to go

marsha1l_v6

500 RPM
Aug 1, 2013
666
130
543
Kuala Lumpur
This not latest one haha. I got one more. I dyno 3 times d. One before overhaul. One after overhaul and tuning. 3rd round another fine tuning with fpr.
2nd and 3rd round same place dyno.
but the torque you mention spot on with the graph...165.55 @ 19.88kg-m

at 225 thats around 36% increase in hp while remain at same torque..your mech put his secret recipe during overhaul?
 

brokenjars

Known Member
Senior Member
Jun 7, 2012
229
16
1,518
Kedah
but the torque you mention spot on with the graph...165.55 @ 19.88kg-m

at 225 thats around 36% increase in hp while remain at same torque..your mech put his secret recipe during overhaul?
The torque i remember no change. Around almost 20 also. I remembered 19.88 only haha because i love number 8 lol.
Original factory hp is 204hp. After tuning get 225hp. So just up 21 hp, didnt reach 36% la. 3rd dyno just up whp slightly only. Should be 187 whp. Then my calculation i take 187 whp x 1.20 = 225 hp (Bundarkan)
 

brokenjars

Known Member
Senior Member
Jun 7, 2012
229
16
1,518
Kedah
how is any of the stuff you using not rare? You bought the car ready swapped? Interesting
Yeah its rare but available in nissan fb groups if you asked around. Also i found one nissan primera p12 halfcut ready at nearby halfcut shop already. Worse come to worse, I buy the halfcut lol
 

minibeany

500 RPM
Senior Member
Apr 30, 2017
598
101
543
Petaling Jaya
wah,your 4g15 got rear disk one? You convert to 1.6/18?
not mistaken 1.6 and 1.8 the same size rotor.... unless EVO3.
my drum brake always jammed due to rust and not frequently drive. Last time i have to spare a mallet hammer in the boot to whack the drum brake. LoL...
 

KHNG940413

500 RPM
Thread starter
Dec 25, 2015
668
56
528
johor bahru
not mistaken 1.6 and 1.8 the same size rotor.... unless EVO3.
my drum brake always jammed due to rust and not frequently drive. Last time i have to spare a mallet hammer in the boot to whack the drum brake. LoL...
Mine still remain stock but consider upgrade the front rotor & better pad. Did't stop so good when going around 100~120 or heavy brake. It juz feel very slow to stop the car down.
 

sanekit

1,500 RPM
Dec 9, 2015
1,616
157
663
Petaling Jaya
Mine still remain stock but consider upgrade the front rotor & better pad. Did't stop so good when going around 100~120 or heavy brake. It juz feel very slow to stop the car down.
sounds like pads issue. what pads u using now? have u check your brake fluid if it's clean or dirty?
 

Random Post Every 5 Minutes

I was browsing through the Pivot website earlier today and as I was
looking @ the Stepping Gauge section, I got curious about something.

1) Why is there a need to install such a meter in a car? The car already
comes with a RPM meter. What difference does this Pivot meter make? Why
do cars need to install things like Boost Meter, Speed Meter, Tachometer
and Shift Lamps?


2) Are such lamps only installed for Manual Transmission cars? or do
people actually install in on...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience