Pro Neo Concept by Works Engineering - Performance products for the Satria Neo

Works

www.worksengineering.co
Senior Member
Thread starter
Jan 15, 2009
949
23
1,518
Petaling Jaya
www.worksengineering.co
Hi guys, yes we manage to get 128.5 hp on wheel with that amount of products. but the stock isn't 108 on wheel. It's 8+ hp on wheel.
 

deenweirdoz

Active Member
Senior Member
Oct 18, 2008
46
0
1,506
Hi all, Thanks all for the support. The power now is currently at 14+ whp. We do not have a fixed Hp as this car is always used as R&D for our parts.

---------- Post added at 11:56 AM ---------- 6 hour anti-bump limit - Previous post was at 11:53 AM ----------

Price for the New 4 pot Brake is RM 2999.
Can the brake fit into Proton Persona Elegance?
 

Works

www.worksengineering.co
Senior Member
Thread starter
Jan 15, 2009
949
23
1,518
Petaling Jaya
www.worksengineering.co
EMS is RM 1399 only..installation and tuning is rm350
 

cpslover

Known Member
Senior Member
Apr 13, 2009
171
3
1,518
Is ur showroom in Sunway provide installation for EMS-1 and tuning and dyno as well? Or just sell and install somewhere else?
 

Works

www.worksengineering.co
Senior Member
Thread starter
Jan 15, 2009
949
23
1,518
Petaling Jaya
www.worksengineering.co
Ems-1 can be installed & tuned with any of our dealers.just enquire with any of them

---------- Post added at 01:09 PM ---------- 6 hour anti-bump limit - Previous post was at 01:08 PM ----------

Any Pro-Neo performance parts can also be installed in CPS except for the cam shaft. But Pro-Neo CPS cam shaft is coming soon.

---------- Post added at 01:11 PM ---------- 6 hour anti-bump limit - Previous post was at 01:09 PM ----------

Snow Performace boost cooler has 3 stage. Stage 1 is Rm 1699, stage 2 is RM 2199 and stage 3 is RM 2950.
 

PauMaster

Junior Member
Senior Member
Jul 20, 2009
9
0
1,501
hmmm I think extensive mods without can shaft is quite pointless...I will wait and resource more on works pro neo products
 

BlackNote

Junior Member
Senior Member
Aug 19, 2007
13
2
1,503
Serian, Sarawak
www.naires.bravehost.com
hmmm I think extensive mods without can shaft is quite pointless...I will wait and resource more on works pro neo products
well bro, it's NA engine... surely hard to gain a lot like turbos or suprecharges but then, it is better to gain small than no gain at all... i've already changed ACP and LCP. It gives me a good 10whp. Quite high for NA engine... well, you can change bit by bit. so that you will know your what your car's capabilities.. hehee...:biggrin:

@Works :- can you exposed a lil bit info about coming soon new Neo CPS camshaft?? at least its degree, maybe? :wink: :biggrin:
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
errr so much and only 129 HP on wheel?
hmmm......
:hmmmm:
Well with 129HP@wheel, if the driveline loss is about 20% then the power@engine is around 160HP. For a 1.6ltr N/A that means about 100HP/ltr already which is actually pretty good. The std Neo engine power is only 126HP right?
If you want really big gains then nothing beats forced induction.
 

Random Post Every 5 Minutes

Need to respray my car inside & outside. Has anyone here got any good recommended place where i can go?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience