Opti-Coat™Pro : Honda HR-V Modern Steel Metallic.

s1tl

1,000 RPM
Senior Member
Jul 13, 2010
1,237
1,019
713
Ipoh/KL

Honda HR-V over Honda HR-V, it's a wave of Honda(s) we are going through everyday. It could be one of the most bought CUV vehicle in Malaysia at this rate! Today we have with us a 1month old Honda HR-V, the owner refuse to drive the car without a properly done protective coating on the paint. Therefore we are here to get him sorted.

Upon arrival, we did our standard walk around.

The car's drainage areas were covered in stains and dust.

As we initiated our standard paint inspection, we found hologram/buffing marks.

These marks are usually caused by improper polishing methods.



We started with the basic washing, the illustration shows a clean and unprotected surface. Therefore the water does not bead on the paint.

After paint correction been done, holograms were corrected.

On a different panel were corrected of the buffing marks.

After completing the paint correction, we did a final inspection on all panels.


The glass was stained with mineral deposits or also known as watermark, so we treated the glass as well.



Finally, we applied Opti-Coat Pro onto the paint. Here are the result.
 

Random Post Every 5 Minutes

I had broke the engine mounting for the 3rd times within 2 yrs as i had FI an NA ride
A workshop suggested change new engine mounting and add on a engine damper
B workshop suggested strengthen the engine mounting via silicon

What's the Pro and Con?
Any suggestion?
Thks for any input
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience