My rear wiper got problem

simplythebest

1,500 RPM
Senior Member
Nov 14, 2003
1,978
0
3,136
Selangor
my rear wiper sux0r .. when i turn it on .. got those noisy sound .. i think the wiper not smooth or something .. what can I do? change a new wiper? since the day my car is out already like that ooo, i hardly use the rear wiper anyway .. only like wipe 1-2 times then i off it.
 

cyclonite

500 RPM
Senior Member
Nov 27, 2003
858
2
3,018
yeah you hardly use the rear wiper that's why the rubber spoil already la. do you lift it up when you park under the sun or not?

Anyway to solve all your problems, get a wiper which uses silicon blades rather than rubber. I know 2 brand that uses silicon. 'Dura Edge' sells 1 piece for more or less RM20 depending on length. It comes with lifetime warranty, silicon blades. Sure no sound, no problem wan.

The other chun brand wiper i've seen is 'PIAA' it's made of carbon fiber for the whole thing and silicon blades as well. There's no lifetime guarantee here but the silicon blades can be refilled w/o buying the whole wiper. This wiper costs RM100 per piece.
 

simplythebest

1,500 RPM
Senior Member
Thread starter
Nov 14, 2003
1,978
0
3,136
Selangor
I hardly use because its too rough afraid might scratches my windscreen.
The rubber might melt under the hot sun?

i actually turn on the rear wiper to let the car behind me to see the car infront of me :lol: , i still can see without using the rear wiper B)
 

cyclonite

500 RPM
Senior Member
Nov 27, 2003
858
2
3,018
not melt la... it 'dries' up the rubber lor... then after a long time it becomes hard already.
 

johnsonlam

DIY King
Senior Member
Nov 17, 2003
1,182
313
3,183
Balik Pulau, KL
Change your Wiper.. then Apply RAIN X

When applying RainX..
- Glass must be VERY Clean
- Apply RainX and let it dry to a Haze.
- Polish with Clean Cloth (I use Paper towels)
- Polish till no hazzy marks.

It only works that way.. Last time once I did not polish it properly.. Then went to Cameron Highlands.. The glass becomes like very very bad plastic. can only see one white layer...
 

cyclonite

500 RPM
Senior Member
Nov 27, 2003
858
2
3,018
Well, if you use the PIAA silicon wiper I was talking about, it coats the glass as it works so in the future your glass will be just like with rain-x. Rain droplets bead off easilly
 

cyclonite

500 RPM
Senior Member
Nov 27, 2003
858
2
3,018
It's called 'Dura Edge' I've never heard of dura ace before. I used Dura Edge before.
 

ZephyRed

Known Member
Senior Member
Nov 21, 2003
419
0
3,016
Sunway
Visit site
Originally posted by cyclonite@Dec 2 2003, 04:05 PM
Well, if you use the PIAA silicon wiper I was talking about, it coats the glass as it works so in the future your glass will be just like with rain-x. Rain droplets bead off easilly
how much issit?

where to get it leh? never heard of piaa wipes
 

Random Post Every 5 Minutes

GSR blues = turbo and fueling probs..huhuhu :(

Guys..hi and thanx for droping by..i have a few problem and i'm new to Turbo and forced induction..so hopefully the sifu's out there can lend me a few tips and advice..

o.k..my last prob was done..but noe i have a new prob..which is that i'm ysung a TD05HL from a vr4 rs..the stock injector for that engine is 510cc..but currently i'm using only 390cc..so my prob is this,when i get into the boost rpm,everything is good till 5500rpm..but...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience