My Levin AE-101 : Past, Present & Future

D7zul

2,000 RPM
Senior Member

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,698
849
713
Shah Alam
bro,vvt solenoid berapa harga?
rm220 from a fren

new original.. Toyota genuine parts.. do u want it too?

---------- Post added at 11:20 PM ---------- 6 hour anti-bump limit - Previous post was at 07:32 PM ----------

There is a small O ring inside the SVT solenoid but need to cut open the shell to reach it.
If we can replace it and close back the shell then we can solve the leak problem.
I think no need to crack open d solenoid.. There's a small clip like this at d end of that thing.. I think if u hv d tools, u can open it

 

levin818

1,000 RPM
Senior Member

levin818

1,000 RPM
Senior Member
Nov 29, 2003
1,261
321
3,183
Shah Alam
Visit site
for those who is still wondering why i got my short trumpet :wink:

Hmmm.... the "Corrected Horsepower" is accurate??:biggrin:

IMO, the more convincing way to dyno the engine with diff length of trumpet is to run-in the ECU first before hook it up to the dyno machine. Simply because the ECU need a little time to optimize its setting for the new trumpet.
 

ahaw

Known Member
Senior Member

ahaw

Known Member
Senior Member
Apr 1, 2007
141
6
1,518
@dzul: yup, but need to wait price qout from forman..
 

D7zul

2,000 RPM
Senior Member

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,698
849
713
Shah Alam
@dzul: yup, but need to wait price qout from forman..
ok.. let me know :biggrin:

Hmmm.... the "Corrected Horsepower" is accurate??:biggrin:

IMO, the more convincing way to dyno the engine with diff length of trumpet is to run-in the ECU first before hook it up to the dyno machine. Simply because the ECU need a little time to optimize its setting for the new trumpet.
could u teach us d fastest way for ecu to optimize its setting?
 

D7zul

2,000 RPM
Senior Member

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,698
849
713
Shah Alam

bera

500 RPM
Senior Member

bera

500 RPM
Senior Member
Oct 27, 2007
827
229
1,543
carefull aa with the pulley...should monitor closely...some pulley are known to eat the belting...
 

D7zul

2,000 RPM
Senior Member

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,698
849
713
Shah Alam
got my apexi 4-1 spiral extractor last month..

and it's ready for ceramic coating after a good clean up..

but, as usual, financial is not on my side now..

so, sitting in my parent's garage for now..

at this moment.. pending :

1. BT alternator
2. 16v power steering pump
3. ceramic coating extractor

so many things to do, so lil money :banghead:

if any1 interested to sponsor me, PM me :biggrin:

some pics

 

D7zul

2,000 RPM
Senior Member

D7zul

2,000 RPM
Senior Member
Feb 24, 2011
2,698
849
713
Shah Alam
nice...how much for the coating...??
rm1xxx..

i know it's expensive.. but it would last a lifetime (if no accident :biggrin:)

1 of my fren did wrap his apexi header.. n it crack.. i think its bcoz of uneven wrap.. so, i wouldn't take chances with exhaust wrapping

:driver:
 

levin818

1,000 RPM
Senior Member

levin818

1,000 RPM
Senior Member
Nov 29, 2003
1,261
321
3,183
Shah Alam
Visit site
Can buy the ceramic coating paint from hardware shop and DIY. It will be a lot cheaper.
From the description, it mentioned that the paint (made in USA) is specifically for exhaust manifold coating purpose.
Cant remember where i saw the paint but you may try to go shopping at ACE Hardware.
 

bera

500 RPM
Senior Member

bera

500 RPM
Senior Member
Oct 27, 2007
827
229
1,543
Can buy the ceramic coating paint from hardware shop and DIY. It will be a lot cheaper.
From the description, it mentioned that the paint (made in USA) is specifically for exhaust manifold coating purpose.
Cant remember where i saw the paint but you may try to go shopping at ACE Hardware.
yeah...its VHT flameproof...rated at 1k degree C but ace hardware dont have...they have engine enamel (rated at lower 500 degree) and those bbq pit spray ...i tried those...burnt off if you rev long and hard enough...but if spray at other engine part like block and head its ok...on exhaust manifold i afraid it wont last long...