is this normal? (eg6)

audiolizard

Known Member
Senior Member
Aug 19, 2009
89
1
1,508
Kuala Lumpur
no matter how i drive, with RON95, my b16a (b16b head) still can achieve 300++km my full tank is Rm60-70
heres my modification i roughly wrote out.

i dont know bout the cams but its a b16b head.
3 inch piping 4-2-1 extractor.
e-manage
racing thorttle body
walbro fuel pump
15 inch rims
racing clutch 3 kaki.
170 HP
my car is manual

so this is consider normal FC for this kind of mod or already ridiculous?

if i wan a normal FC back, i need to change massive of part, but which 1?
if i change back to normal, horsepower will drop alot? wad is the standard hp for b16a?
to change back to normal, will it cost me 5k above?
 

camshaft

Known Member
Senior Member
Nov 3, 2006
411
10
1,518
quite normal for 300km...but mine can go for 350km full tank...
if you want the standard FC...u need to change all of you parts to stock b16a...excluding the e-manage
confirm you will drop some hp...
stock standard b16a 1st gen is 160HP makes about 130hp-140hp on wheel
2nd gen is 170HP and makes about 140hp-150hp on wheel...
 

Shoken7

Known Member
Senior Member
Oct 15, 2006
193
0
1,516
i'd say tats a reasonable FC considering of what u have already mod
 

E-Tech

Senior Member
Senior Member
Jun 28, 2005
1,115
256
3,183
Johor
Wan power, wan FC....?
ehhhhh......move vtec point higher for normal drive...
anyway lol.....
 

Shoken7

Known Member
Senior Member
Oct 15, 2006
193
0
1,516
try using Ron 97
based on my own experience..b series engine runs better with that compare to 95
u get more power and more km...depends on your driving style of course

my tank goes dry very fast when i use ron 95
:S sorry..i dont have any solid proof yet..but its just how i felt

u prolly can down size your piping abit..3" is a bit too big for your car
 

kayour

Known Member
Senior Member
Apr 5, 2006
326
41
1,528
yeap...agree...i think 2.3-2.5" is better
3.0" as i noe...4 tebo application
 

shah5755

Known Member
Senior Member
Apr 20, 2007
355
31
1,528
Pj....kch
for me its still ok la bro coz std b16a as i know can run for 330-350km with full tank around rm70-80...u hv a great car oredi y suddenly u want to change back only bcoz of FC.....:smokin: 3" piping too big bro....
 

Wanggot

Senior Member
Senior Member
May 22, 2006
3,906
62
3,148
Jay Bee
As for my stock-virgim-B16A, it can go for 320km with RM40 Ron95.
Mostly driven casually along state road with minimal traffic jams. Seldom engage Vtec.
BTW how much FC are U targetting 4?
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
its the 3inch zorst, reduce it to 2.2in and u'll get better fc and lower end torque (which i think a Bseries needs direly, lol)

170hp? on which dyno tu?
 

Shoken7

Known Member
Senior Member
Oct 15, 2006
193
0
1,516
wow...B16A, can go for 320km with RM40 Ron95???
*worships* >.<
 

shah5755

Known Member
Senior Member
Apr 20, 2007
355
31
1,528
Pj....kch
yo bro shoken7 my std besixteen can go 330km with full tank rm80:confused:how did u manage to get 320km with only rm40???
 

ACQ2305

500 RPM
Senior Member
May 25, 2007
984
184
1,543
HeadHunters
yo bro shoken7 my std besixteen can go 330km with full tank rm80:confused:how did u manage to get 320km with only rm40???
a light right foot bro..hahaha
 

Random Post Every 5 Minutes

hi good day all
i am driving a old saga running on stock 1.3 4g13
i was thinking on larger capacity engine upgrade due to my power hungry need :biggrin:
yes i am aware of 4g6series and 4g9series or a 4g15 with 4g18 or campro stroker kit but due to the ridiculous price nowdays its not ticking my fancy of having 1 :banghead:
so while i look around i found out there this 4g37 1.8 coded engine which is used in mitsubishi galant/super touring e12 chasis using carburator system that were not...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience