help me toyota 3tc Pre-Ignition problem

Jan 11, 2007
3
0
1,501
''Help me please'' Hey guys my name is scott and i have a toyota ke70 84 model, i currently changed the 4k 1.3l engine to a rebuilt toyota 3tc 1.8l engine with a ford escort webber,it seems to have this problem when it gets hot it wont turn off(Pre-Ignition),it cant be carbon on top of the pistons because it has just been rebuilt,if i take the vacum hose off from the dizzy to webber it will turn off fine, but runs like a bag of sh#t with out the vacum hose thoe,if any one has any idears please let me know.. my email is [email protected],picture's are here= www.myspace.com/dakoda27.
 

Random Post Every 5 Minutes

hey guys,

i have a problem with my car.. the steering vibrates excessively from about 90km/h onwards.. i have changed new tires.. rims checked not bent, alignment and balancing done.. what else could be the cause of this? btw after doing alignment and camber alignment the vibration got stronger.. my car set up is 4agze custom made driveshaft on the left side to correct length but same spec as ori gze shaft.. right side is original gze drive shaft. bearings are relatively new.. hope someone...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience