Ek oem bushing

tecque

500 RPM
Senior Member
Jun 29, 2005
727
7
1,518
sbn
U can try Hardrace bushings, which is a very high quality... Call 0123811137 for more info...
 

sazleej

Known Member
Senior Member
May 10, 2007
85
0
1,506
where can i find dealer for the es? need for the whole car.. roughly around rm2k - rm3k rite??
 

steviezach

Known Member
Senior Member
Feb 1, 2005
191
3
3,018
go for hardrace hard rubber if u intend to keep ur car long or if u have modded engine as it offers better handling
go for OEM if your ride is slow like mine / if you are looking for more comfortable ride .

Front:
Upper arm bush - 2 per side = 4pcs ( OEM doesnt come with separate bushes , you need to buy the whole arm )
Lower arm + compliance bush - 3pcs/side = 6pcs
Front stabilizer link - 2 pcs
stabilizer bush holder - 2 pcs
Tie rod - 2 pcs (optional but better if replace too)
ball joints knuckle - 2 pcs ( optional but better if replace too )

Rear:
compensator arm - 2 per side = 4 pcs
Trailing arm bush (big) -1 per side = 2pcs
Upper arm/ chamber - 2 per side = 4pcs
Lower arm bush - 3 per side = 6pcs ( i purchased with whole arm bcos the price diff is not much after - the Labour fee to pump the bushes )
OPTIONAL : if you have rear stabilizer bar , u need to purchase the stabilizer link and holder like the front too .

dont forget about the absorber bushes too . each has 2 x 4 absorbers = 8 pcs . all should cost around RM2k
 

Random Post Every 5 Minutes

Hi,

I am having difficulty in removing very very stubborn water spots on my windscreen. This is what i've already tried

1. white Vinegar 100% strength leave it for 5 mins.
2. Meguairs Water spot remover by hand and by rotary buffer
3. Clay with opc and meg's quik detailer.
4. scraping it with my finger nails. Doesn't come off!!
5. Meg's ultimate compound by hand.

Any advise is greatly appreciated :)

Thanks.
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience