B20 full race engine keeps blowing out

GearSpeedKelvo

Known Member
Aug 5, 2012
167
10
518
Philippines
A friend of mine is having problems on his b20 engine it keeps blowing up.
It’s meant for drag race it has everything changed inside and out.
It only runs up to 2 times then the third run the engine blows he couldn’t reach the final round he only gets up to the qualifying race.
It’s running 11 sec on the quarter mile.

Anybody ?
Or Is this really normal for a race engine?
What could be the cause?

Thanks.
 

Izso

NA NA NA NA NA
Helmet Clan
Moderator
Mar 28, 2004
15,389
6,411
5,213
KL
A friend of mine is having problems on his b20 engine it keeps blowing up.
It’s meant for drag race it has everything changed inside and out.
It only runs up to 2 times then the third run the engine blows he couldn’t reach the final round he only gets up to the qualifying race.
It’s running 11 sec on the quarter mile.

Anybody ?
Or Is this really normal for a race engine?
What could be the cause?

Thanks.
When you say "blow up", what exactly happens? The pistons punching a hole in the block? Valve and pistons hi5 each other? Or what? And since it's a drag engine I'm pretty sure there are secret mods in there you don't know about. Most race prepped engines sacrifice reliability for all out power and I'm sure your friends car is no exception.

You need to know what exactly "blew up" to determine why it detonated
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
mechanic...
tuning...
driver...

all those 3 if not working well also can blew up no problem...

so need to ask your friend..which problem makes the engine explode first..
 

GearSpeedKelvo

Known Member
Thread starter
Aug 5, 2012
167
10
518
Philippines
It smokes a lot after 3 runs. The piston ring got broken during the run.Rpm reaches 12,000rpm.
 

gunnerzz

2,000 RPM
Jul 3, 2014
2,109
695
713
38
Melaka
2 way to put it;
-Driver driving beyong mechanical limit or
-Engine not built according to 'intended' limit
 

4gbanger

1,500 RPM
Jun 26, 2013
1,958
386
683
Johor/ShahAlam
1. Engine not tuned properly. knocking badly or too lean.
2. Poor engine blueprint (clearance)
3. Engine oil seized or too hot
4. driver over revving and poor shifting
5. any other unknown reason
 

GearSpeedKelvo

Known Member
Thread starter
Aug 5, 2012
167
10
518
Philippines
Usually when I watch legal drag racing those honda with turbos they keep bouncing it over the rev limit(not sure if its rev limiter) when launching then hit 2nd gear still bouncing the rev limit then hit 3rd and hit 4th. If I have time I'm going to watch their run.
 

Random Post Every 5 Minutes

A'kum kawan²...

kawan nak tny sikit pasal enjin L700 (Gino/Cuore)...
kawan tukar enjin original kelisa kawan dgn enjin gino L701
pasal enjin lama kawan problem...

Enjin Gino yg kawan beli dan masuk dlm kete kawan ni
betul² sebiji sama dgn enjin lama kelisa kawan. Yg bezanya
cuma dia ada intercooler kat atas valve covernya.

Kawan nak mintak pendapat korang, ok ke enjin tu?
Enjin tu kawan beli pasal kawan tgk dia dlm halfcut Gino...
Satu lagi, enjin tu gear Auto... Kawan rase...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience