aloi@aluminium welding...help!!

afiq_farami

Known Member
Senior Member

afiq_farami

Known Member
Senior Member
Mar 28, 2009
91
0
1,506
Dear forumer,
I just bought 2nd hand intake velocity. But the inlet hose has bend and almost broken due to poor shipping. Where the workshop in klang valley can repair? since it is aloi@aluminium material.broken heart when see the damaged.
 

Attachments

^pomen_GTR^

7,000 RPM
Senior Member

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,510
1,688
1,713
The Mines
try check nearby machine shop (where they do head skimming and block rebore or atleast radiator repair) usually those place have alloy weld...
 

BoxCarRacer

500 RPM
Senior Member

BoxCarRacer

500 RPM
Senior Member
May 7, 2008
524
103
1,543
Johor Bahru
What a poor shipping method by the seller. Should complain to them about it bro.

Yeah, I agree with Pomen_GTR, if you wanna find a cheaper alternative, then just find a radiator repair shop. They normally cater these type of welding and it's cheaper too.

Heads up though. Make sure you supervise them because some of the welders are foreigners (bangla's and Nepalese) and they just do a cincai work. Mine was just a minor crack so I don't need long quality welding.
 

afiq_farami

Known Member
Senior Member

afiq_farami

Known Member
Senior Member
Mar 28, 2009
91
0
1,506
Done..I have send to engineering workshop with total cost rm35..fire with flame to straighten and then weld the hole..Now, in stage to touchup with spray can..:burnout:
 

kayour

Known Member
Senior Member

kayour

Known Member
Senior Member
Apr 5, 2006
326
41
1,528
how much if they just weld only?? how they caj...per inch..or per electrode/ filler rod...or sumting??
 

afiq_farami

Known Member
Senior Member

afiq_farami

Known Member
Senior Member
Mar 28, 2009
91
0
1,506
how much if they just weld only?? how they caj...per inch..or per electrode/ filler rod...or sumting??
They charge a rod aloy welding even 1/10 used. But total cost about RM35

---------- Post added at 02:59 PM ---------- 6 hour anti-bump limit - Previous post was at 02:57 PM ----------

i also need to weld my bro in law's aluminium radiator...any recomendations around ampang area?
not sure for area ampang.