4G93T Club

[Adeen]

hey guys im new in gsr...just change my wira 1.6 to gsr....wanna change BOV but may i noe that u guys use wat to stuck into de intake hole that for de ori BOV return....?thx

u just use battery to close it....use the big type battery..

 

[ehdrian]

i tot batteries can explode when expose to heat?..

 

[Adeen]

dunno about that....been using for a year on my 63t....din explode yet...

 

[ehdrian]

haha..i definitely dare not, would pay machine shop to fabricate 1 for me..

 

[kienyee]

how high r u boosting dat makes u think the stock oil pump unable to support?..

wanna boost til 1.2 n thats no place to fit de turbo cuz oil filter is blocking

---------- Post added at 11:46 PM ---------- 6 hour anti-bump limit - Previous post was at 11:44 PM ----------

u just use battery to close it....use the big type battery..

okae..i'll try it..thx alot

 

[Adeen]

haha..i definitely dare not, would pay machine shop to fabricate 1 for me..

hehe...now not using anymore since change to s/steel intake already....

kienyee :- don't forget to secure it properly....with clips

 

[mfirdaus]

hi all,
sorry for interrupting, really need help with my evo 7 GTA, 2 days ago when i cruising around shah alam, sudddenly my engine warning light appear. After around 15-20 minutes the light disappear. What could be the reason? Can i get my evo to be scan since the light already disappear? please help me sifus -sifus.

 

[ehdrian]

hi all,
sorry for interrupting, really need help with my evo 7 GTA, 2 days ago when i cruising around shah alam, sudddenly my engine warning light appear. After around 15-20 minutes the light disappear. What could be the reason? Can i get my evo to be scan since the light already disappear? please help me sifus -sifus.

bro i think there are many evo sifu at MLOC forum..

 

[mfirdaus]

thanks ehdrian, will try there also.

---------- Post added at 12:30 PM ---------- 6 hour anti-bump limit - Previous post was at 12:28 PM ----------

just notice this is 4G93T thread, not 4G63T thread.. aiya, my eye oredi alignment lari. Sorry guys!!!1

 

[zedkov]

Hi all sifu, is 4g93p driver side drive shaft same wit gsr? D short wan which is without hanger. Thx!

 

[Wira3047]

Hi all sifus, need you help..M using Gsr Rs,recent Mods...stainless steel piping,tial mvs,fuel regulator however j have overboost issues.Currently boost can go up to 1.5 bar...any idea what can cause this problem....Foreman says maybe the main outlet of the turbo is 2 small so they advise to pull directly from the intercooler piping to the wastegate..can that solve my problem....Please help sifus...thanks

 

[wira3319]

Hi guys,
sorry for tumpang thread, anybody can help me with idling problem on my 4g93t? too much vibrate. for info, i already service the throotle body, check vacuum leak, but the engine still in vibrate when idle. has increased the timing still can't tackle the problem. any idea we can share?


Regards

 

[WAJA2003]

hehe newbiw here

---------- Post added at 09:55 PM ---------- 6 hour anti-bump limit - Previous post was at 09:46 PM ----------

Hi all sifus, need you help..M using Gsr Rs,recent Mods...stainless steel piping,tial mvs,fuel regulator however j have overboost issues.Currently boost can go up to 1.5 bar...any idea what can cause this problem....Foreman says maybe the main outlet of the turbo is 2 small so they advise to pull directly from the intercooler piping to the wastegate..can that solve my problem....Please help sifus...thanks

u tial mvs using wat spring rate ooooo???? use those 1.0bar enuft lo...or try connect back u ori acuator

 

[Wira3047]

hehe newbiw here

---------- Post added at 09:55 PM ---------- 6 hour anti-bump limit - Previous post was at 09:46 PM ----------



u tial mvs using wat spring rate ooooo???? use those 1.0bar enuft lo...or try connect back u ori acuator

Bro using 0.9 spring rate....it is not the spring rate problem i guess...

 

[WAJA2003]

Bro using 0.9 spring rate....it is not the spring rate problem i guess...

no ecu managment control boost until 1.5BAR still smooth mehhhh,wont lag mehhh???
ori acuator hole lehh?? weld to jam jor?

---------- Post added at 04:37 PM ---------- 6 hour anti-bump limit - Previous post was at 04:21 PM ----------

bro using 0.9 spring rate....it is not the spring rate problem i guess...

ｕ　ｔｉａｌ　ｗａｓｔｇａｔｅ　ｉｓ　ｏｒｉ　ｏｒ　ｃｈｉｎａ　ｇｅｈ？？　ｃｈｉｎａ　ｇｅｈ　ｖｅｒｙ　ｅａｓｙ　ｐｅｃａｈ　１．．．．．