4g13p Megavalve Cant Start Problem

Oct 25, 2015
1
0
1
Kuala Lumpur
Need some advices regards an old Saga Megavalve which cannot start.
Battery is okay, only cranking sound but engine not able to run.

The car haven't been use for about a few months.

Petrol is available. Pumped some in early of the year.

Spark plugs are okay.

Anyone have a idea what is the most possible problem?
 

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
plug cables all secured?

BTW, exactly how old was the petrol, when you mean "pumped some in early this year""
 

kayour

Known Member
Senior Member
Apr 5, 2006
326
41
1,528
spark plug ada api ?
or the carb need to 'pancing'...due to long time not started
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Two main things to look for. Fuel and spark. Open air filter cover look into carb opening. Get someone to step on accelerator pedal. Should be able to see fuel squirt in. Then take one spark plug out attach the plug cable and earth the plug to engine metal. Get someone to crank the engine and see if there are any sparks. If both are okay, then probably like bro. Izso mentioned you may need to crank a little longer, or hope the combustion chamber is not flooded with fuel, then you need to crank longer without stepping on the accelerator.
 

Random Post Every 5 Minutes

I would like to check, how well is the aftermarket brake for 285mm rotor?
Is it about the same as stock?

my concern is, now my WHP is near 200 and i still using stock brake system.
my wheel is using 4 bot instead of 5, 2nd reason is i using 15" rims.

so if i using 285mm rotor type and branded caliper ( in complete set)
will it help for near 200 WHP? ( example evo, wrx, CTR are above 200hp and yet their stock already more then 320mm)

any recommend complete set brake for 15"
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience