4agze loosing power while boosting

gtz4agze

Junior Member
Senior Member
Jan 27, 2010
7
0
1,501
new zealand
i have reciently put a 10psi pullry kit on my 4agze but..... when i get to about 5-6000 rpm it starts to
get slugish! is it the factory computer thinking there is to much air?? do i need a piggy back thing (technical term) for the gas and air flow?? help!!!:banghead::banghead:
 

miriguy

500 RPM
Senior Member
Jun 29, 2008
887
20
1,518
its a knock sensor issue. i assume u upgraded to a 14psi pulley?
 

miriguy

500 RPM
Senior Member
Jun 29, 2008
887
20
1,518
originally is alreadt 10psi pulley. or did u upgraded to lightweight pulley?
 

miriguy

500 RPM
Senior Member
Jun 29, 2008
887
20
1,518
yr motor is from the AW11? try tighthen your belt. belt needs to be tighthen also after a few laps
 

gtz4agze

Junior Member
Senior Member
Thread starter
Jan 27, 2010
7
0
1,501
new zealand
motor is from ae101 tryed to tighten the belt didnt work. its weird it happened as soon as i left the work shop.
 

scoupe

1,000 RPM
Senior Member
Mar 19, 2005
1,087
37
5,148
shah alam
hmmm i thought ae101 suppose to have 10psi pulley.. are u talking bout the power dip at 5.5k rpm?
 

gtz4agze

Junior Member
Senior Member
Thread starter
Jan 27, 2010
7
0
1,501
new zealand
had a 8psi standard one. yea has a power dip around there did do it before but powered through it now doesnt power through it
 

baby_cky

Junior Member
Senior Member
Apr 11, 2006
24
0
1,501
check your charger u runing on air flow type or map type????
my use to hav tis problem but my is piston problem
 

Random Post Every 5 Minutes

Need to respray my car inside & outside. Has anyone here got any good recommended place where i can go?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience