4age upgrade to 7age..

ahaw

Known Member
Senior Member
Apr 1, 2007
141
6
1,518
# TS : sorry off topic. asking sifu's, suitable part number for 4age osv o-ring. mine got oil leaking need replacement.

ps ; cant find any in toyodiy.
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
# TS : sorry off topic. asking sifu's, suitable part number for 4age osv o-ring. mine got oil leaking need replacement.

ps ; cant find any in toyodiy.
mayb u can open it & bring it to the sparepart shop..

mix & match :biggrin:
 

LevinTE27

Known Member
Senior Member
Nov 16, 2003
335
20
3,018
i would say no to 7ag hybrid. i built my very first 7AG Turbo in year 2003, taking 30psi boost with microtech ecu, custom conrod , HKS cams. it run 12.8sec 1/4mile. but it really not as revvy as 4ag. it dont go over 8000rpm.

with the same engine head, i moved it to my AE86... it bounce up to 9500rpm easily. power wise, no much different
 

LevinTE27

Known Member
Senior Member
Nov 16, 2003
335
20
3,018
16v head. using 81mm toyota oem 8.0c/r piston.

pic took on 2005 .. any way this car scraped already.. parts moved into a 86 using 4ag block instead

 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
it take lots of skill to build a proper 7AGE

:biggrin:
 

aziziell

1,500 RPM
Senior Member
May 9, 2007
1,508
6
1,638
my 7age 20v rev till 9000rpm with power band at 8600rpm
using toda 288 cam.used v power fuel
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
my 7age 20v rev till 9000rpm with power band at 8600rpm
using toda 288 cam.used v power fuel
nice.. good to know some1 here using this setup..

what timing belt u using?

:biggrin:
 

turbo10

500 RPM
Senior Member
Dec 11, 2003
626
47
3,028
sg petani kedah
for BT 20V needs 115 toothed = 16V belting, for 16v head needs 117 toothed = porch924/renault..maybe the cam pulley location are narrower, or due to tensioner location..IMHO..correct me if I am wrong
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
for BT 20V needs 115 toothed = 16V belting, for 16v head needs 117 toothed = porch924/renault..maybe the cam pulley location are narrower, or due to tensioner location..IMHO..correct me if I am wrong
Great info..

How bout d exractor? U guys custom-made?
 

Random Post Every 5 Minutes

this morning my fren found that his car is gone when he going to work.....he suspect car get stolen by midnight.....his car is wira special edition black colour..wif engine 1.8 twin cam..16 sport rim..others all standard...location car stolen is sg.buloh new village...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience