3SGTE ST215 into ANE11

wishturbo

Active Member
Senior Member

wishturbo

Active Member
Senior Member
Feb 6, 2009
47
7
1,508
3SGTE Conversion Toyota Wish
Ouch! I'm mad once again, c'mon! this is family car man! Are u nuts!

Once upon a time...





Donor Vehicle: JDM 99 Caldina GT-T (ST215)
Mileage: 120,000
Displacement: 1998cc
Valve train: DOHC 4 Cylinder, 16 Valve, 2.0L TURBO
Horsepower: 191 kW (256 hp) @6200 rpm
Torque: 324 Nm (239 ft·lbf) @4400 rpm
Compression: 9.0:1
Bore/Stroke : 86mm




Day 1 - Disassemble







Day 2 - Cleaning

Engine cleaned







This Haltech will be the ECU



This turbine will boost my 3SGTE



Day 3 - Fitting

All 4 mounts fit and no need to adjust







Day 4 - Locked

Gearbox disassemble



Rear wheel axle case removed and sealed



AWD successfully locked

 
Last edited:

wishturbo

Active Member
Senior Member

wishturbo

Active Member
Senior Member
Feb 6, 2009
47
7
1,508
Nicely done! But can provide more on how they lock up into 2WD?
Hard metal placed in between of the gear. Click to enlarge.


On the top of the gear, weld with TIG. Click to enlarge.
 

AE75

Known Member
Senior Member

AE75

Known Member
Senior Member
Feb 10, 2010
278
11
1,518
Kuala Lumpur
Hard metal placed in between of the gear. Click to enlarge.


On the top of the gear, weld with TIG. Click to enlarge.

place a hard metal in between the differential and Weld with TIG? I get some ideal already... thanks for useful guide
 

WrX7

Known Member
Senior Member

WrX7

Known Member
Senior Member
Jan 17, 2005
266
1
3,018
Visit site
Wishturbo, may i know how much u pay for the conversion and the JDM 99 Caldina GT-T (ST215) halfcut???

mind to tell?? thanks..
 

wishturbo

Active Member
Senior Member

wishturbo

Active Member
Senior Member
Feb 6, 2009
47
7
1,508
Day 5 - Mount

+





Hehehe,, tyre shop with good workmanship. Transplant many engines without problem. There got one skillful mechanic previously working at motorsport shop :rofl:

Btw, this is just stock conversion. After that the car need to inspect at Puspakom. After that, 2 more weeks at RMD garage for fabrication, after market part installation and tuning process :banghead:
 
Last edited:

wishturbo

Active Member
Senior Member

wishturbo

Active Member
Senior Member
Feb 6, 2009
47
7
1,508
whoa...very nice conversion..
i saw 1 half cut same like urs selling quite cheap, got abit gatal to squeeze this to my AE101..
Hehehe wait no further lol

3SGTE comes with how many displacements? can install to older TOYOTA models?
3S variant got 2 type, NA and turbo.

NA is 3SGE (dual vvti, normally ppl call beam engine) which can be found in altezza.

Turbo is 3SGTE which can be found in mr2, mrs, caldina and celica

Mostly 4 cyc straight chasis can fit this 3sgte

hi.u wan to sell ur half cut bonet?
Sorry bro, using the scoop temporary for puspakom inspection