Pomen already cek all hose there was no leak.....@that meter broke...?
Siri bercakap dengan HP sendiri...
Siri bercakap dengan HP sendiri...
Nop dont use metal gasket...O.M.G.....so how to settle this? :(are u using metal gasket? if no your head will pecah soon. i guess the boost reading is incorrect.
should be max 0.8-1bar
1st istall it was at 0 bar....the blue hose 1 is boost meter hose....maybe meter faulty, try swapping with your friends one 1st.
---------- Post added at 01:28 PM ---------- 6 hour anti-bump limit - Previous post was at 01:28 PM ----------
or maybe the vacuum hose salah cucuk lubang, try to get 2nd opinion from another mech.
At idle should be -0.5 to -0.6. At 0 means normal use like NA.Heheheheh.....budged already lariii laaa....
What is difrent 0 bar and -0.5 bar reading at boost meter?wich 1 is true 0 bar or -0.5 bar?
Right or not this boost meter reading?
Siri bercakap dengan HP sendiri...
Bro, I salute you as you dare to go beyond the limits even without metal gasket but if I were you I'll get a metal gasket installed before going for high boost though(if your boost meter is accurate) as I wouldn't want to risk a blown gasket or worst case scenario blown engine in the middle of the road lol.Heheheheh.....budged already lariii laaa....
What is difrent 0 bar and -0.5 bar reading at boost meter?wich 1 is true 0 bar or -0.5 bar?
Right or not this boost meter reading?
Siri bercakap dengan HP sendiri...
I dont know my car was like that.....I dont do any things just install boost meter, 2.5 inch pipe intercooler, blitz sus power air flow, 3 inch from front to rear exzos pipe no middle muffler & nissan silvia s15 exzos 3inch thats all......I think my car was read at 0.5 bar - 0.8 bar only..... :(Bro, I salute you as you dare to go beyond the limits even without metal gasket but if I were you I'll get a metal gasket installed before going for high boost though(if your boost meter is accurate) as I wouldn't want to risk a blown gasket or worst case scenario blown engine in the middle of the road lol.
Then better double back to your mech if u have any and get it checked out otherwise send to dyno to be safe. Or u can install an external waste gate where u can set the boost level to either low or high. Running high boost on the road without metal gasket is like waiting for the time bomb to go off.I dont know my car was like that.....I dont do any things just install boost meter, 2.5 inch pipe intercooler, blitz sus power air flow, 3 inch from front to rear exzos pipe no middle muffler & nissan silvia s15 exzos 3inch thats all......I think my car was read at 0.5 bar - 0.8 bar only..... :(
Siri bercakap dengan HP sendiri...
Yup.....like exhaust bocor is it?
So check exzos system from front to rear?looks like there is a leak somewhere....i experienced the same thing as u but just cant remember how i rectified the problem.
if not mistaken something bocor at the exhaust system
yup.....jack up your car, go underneath, start your engine & get someone to rev your engine while u hear where the sound is coming from.So check exzos system from front to rear?
Siri bercakap dengan HP sendiri...
try the screw at the top.How to setting this bov blitz??
Siri bercakap dengan HP sendiri...
The screw must be short or long?yup.....jack up your car, go underneath, start your engine & get someone to rev your engine while u hear where the sound is coming from.
---------- Post added at 09:05 PM ---------- 6 hour anti-bump limit - Previous post was at 09:04 PM ----------
try the screw at the top.
Yours got 2 screws? Normally the one which a locking nut....The screw must be short or long?
Ok I will cek that exzos system......
Siri bercakap dengan HP sendiri...
Yours got 2 screws? Normally the one which a locking nut....