5 years down the road and considering inflation rate every year.. 4k RM is alright imho.
As far as possible try not to use spacers. Get rims that can clear the brakes......Thanks for the answer.. And good suggestion on the weighing part..
Regarding wheels i will check it out but I planned to buy new set of rims with 6.5jj and 45 offset.. I searched around hondatech, one of the members claimed to have no problem with that combo.. But i also read that at high speed braking, it would be best to have spacers.
I will take note on the servo part... I'm planning to upgrade to either dixcell or PmU rotor and use steel braided hose as well.
like i said before.... not just size and offset.. but wheel design is also a concern. when i say wheel design, i dont just mean the spokes.. the barrel oso needs to take into account.Regarding wheels i will check it out but I planned to buy new set of rims with 6.5jj and 45 offset.. I searched around hondatech, one of the members claimed to have no problem with that combo..
Currently I'm using 96 DC2R master cylinder.. Is that good enough or it'd be best to upgrade? And if i am upgrading, any recommended Master cyclinder?Then don't forget to upgrade the master cylinder too.