Item : Innovate LC-1 Wideband comes /w AFR DB Gauge
Gauge Size : 52mm (2 1/16")
Colour : Red and Blue
Price : Contact for price
Contact : 012-5562131/PM
Location : KL
Product Details (taken from innovate website) :
LC-1
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1 & LM-2, and includes digital input, output, and 2 user programmable analog outputs
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits.
Key Features
Only fully digital wideband controller.
Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition.
Two user programmable analog outputs.
Permanent install applications
Cost effective individual cylinder tuning.
Easy to upgrade.
Includes LogWorks software
The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware, such as:
Accel
Advanced Racing Technologies
Advantage Motorsports
AiM Sports ( MyChron)
Altronics
Autometer
Competition Data Systems
CORRSYS-DATRON
Corsa Instruments
Cygnus Data Star
DTA Competition Engine Management Systems
Dynamic Test Systems
Dynocom
DYNOmite (Land & Sea)
EcuTek
Edelbrock Qwik Data
EFI Technology
Electromotive
Engine Management Systems
Excalibur Solutions
Brockway Engineering
Fuel Air Spark Technology (FAST)
FXL Data
Haltech Engine Management Systems
Harrison Engineering
Holley
Link ECU
Microtech
MoTeC
Mustang Dynamometer
Pi Research
Powertrain Control Solutions
Powertrain Electronics
Race Technology
Racepak
RPM Performance
SPA Technique
Stack
Stuska Dynamometers
Superflow
Traqmate
Etc...
The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red),
Key benefits of the “DB” kits include:
The industry’s most accurate and fastest-responding wideband controller.
One additional available analog output (one connects to the gauge).
Easy set up and wiring (instructions included).
LC-1 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial).
“Blackout” appearance when unpowered.
Log directly from the LC-1’s digital output into laptop w/included software
Video of how it looks like when in operation:
YouTube- Innovate LC-1 Red DB Gauge
Gauge Size : 52mm (2 1/16")
Colour : Red and Blue
Price : Contact for price
Contact : 012-5562131/PM
Location : KL
Product Details (taken from innovate website) :
LC-1
The LC-1 Lambda cable is a complete wideband controller built in to a sealed cable. It features the same award-winning patented digital measurement principal found in the LM-1 & LM-2, and includes digital input, output, and 2 user programmable analog outputs
The LC-1 is more accurate than conventional designs costing many times as much, and its self-calibrating circuitry can compensate for changes in temperature, altitude and sensor condition. The LC-1 is ideal for applications such as Dynos, Data Acquisition, Standalone ECUs, piggyback fuel controllers, OBD-II software or chip programmers, and gauges. With the LC-1, you can add additional wideband channels to your LM-1, convert an existing narrow-band gauge, or add wideband capabilities to your dyno. You can even tune individual cylinders by using multiple LC-1 kits.
Key Features
Only fully digital wideband controller.
Auto calibration capability to compensate for changes in temperature, altitude, and sensor condition.
Two user programmable analog outputs.
Permanent install applications
Cost effective individual cylinder tuning.
Easy to upgrade.
Includes LogWorks software
The LC-1's analog outputs are compatible with dynamometer software, gauges, or virtually any brand of Data Acquisition hardware, such as:
Accel
Advanced Racing Technologies
Advantage Motorsports
AiM Sports ( MyChron)
Altronics
Autometer
Competition Data Systems
CORRSYS-DATRON
Corsa Instruments
Cygnus Data Star
DTA Competition Engine Management Systems
Dynamic Test Systems
Dynocom
DYNOmite (Land & Sea)
EcuTek
Edelbrock Qwik Data
EFI Technology
Electromotive
Engine Management Systems
Excalibur Solutions
Brockway Engineering
Fuel Air Spark Technology (FAST)
FXL Data
Haltech Engine Management Systems
Harrison Engineering
Holley
Link ECU
Microtech
MoTeC
Mustang Dynamometer
Pi Research
Powertrain Control Solutions
Powertrain Electronics
Race Technology
Racepak
RPM Performance
SPA Technique
Stack
Stuska Dynamometers
Superflow
Traqmate
Etc...
The Innovate Motorsports DB gauges are 52mm (2 1/16”) air fuel gauges. Each gauge features a bright LED (available in blue or red),
Key benefits of the “DB” kits include:
The industry’s most accurate and fastest-responding wideband controller.
One additional available analog output (one connects to the gauge).
Easy set up and wiring (instructions included).
LC-1 incIudes Innovate serial in & out for adding additional modular tuning system (MTS) components. (Gauge itself is analog only- no serial).
“Blackout” appearance when unpowered.
Log directly from the LC-1’s digital output into laptop w/included software
Video of how it looks like when in operation:
YouTube- Innovate LC-1 Red DB Gauge
Last edited:
