(WTS) EBC Brake Pads (Made in UK) - Dworks Garage

Status
Not open for further replies.
Chassis and Wheels

(WTS) EBC Brake Pads (Made in UK) - Dworks Garage

eowk_3456

1,000 RPM
Senior Member
Sep 26, 2005
1,128
16
1,638
kl


EBC BlackStuff Ultimax Brake Pads
Better than Most OEM Malaysian Brake Pads. A high friction pad designed for general replacement use on cars, vans and SUV's (4x4s).

Using shimmed, chamfered and slotted technology and incorporating EBC’s unique BRAKE-IN coating for super quick pad bed-in.

EBC black coded brake pads are a high friction premium quality friction material approved to ECE R90 brake safety regulations and as such are an exact equivalent to original equipment pads fitted to your vehicle from the factory.
When you buy EBC R90 replacement pads you are getting an exact equivalent to an original equipment pad for far less money. Don’t let the lower price point cloud your view of this superb quality product, these pads will stop your vehicle as fast as any original equipment pad and faster than most aftermarket pads. One brilliant feature of EBC R90 pads is their ability to completely eliminate brake judder and these pads will actually COMPENSATE for mild brake judder after 300-400 miles of use. Nominal friction co-efficient 0.46 with minimal rotor damage and similar dust to original parts.

EBC BlackStuff Ultimax Brake Pads
From Rm188.00+



EBC GreenStuff Fast Road Brake Pads
Designed for premium street driving offering better brake effect at loads and speed. EBC Greenstuff has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a NO DUST pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars and vehicles above 200bhp we strongly recommend Redstuff which DOES offer much less dust.

EBC GreenStuff Fast Road Brake Pads
From Rm300.00+




EBC RedStuff Ceramic Brake Pads (For Performance Cars - Hard Driving)
Since this material was introduced in late 2003, it has received many positive write ups from performance drivers of faster cars such as the Impreza. You can read some of these write ups and comparisons to other performance materials on ScoobyNet and SubieGal.com. This is a truly impressive fast road pad for repeated heavy braking. It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph.

Features EBC Brake-InTM surface coating which conditions rotor surface and accelerates pad bed-in.

Nominal friction coefficient 0.5 with approx. 50% dust reduction compared to other pads.

EBC RedStuff Ceramic Brake Pads For Performance Cars - Hard Driving
From Rm400.00+



EBC YellowStuff Ultimate Race Brake Pads (The Ultimate Race Brake Pad for Highly Tuned Cars on both Street and Track)
Although a full race material and capable of high temperature use with very good wear life, this new formulation sets a new trend in race type brake pad compounds. The “bite” from cold is superb which is uncommon with race materials (normally requiring warm-up) and makes this a pad which can be safely used on the highway as well as on the race track. This new formulation was used by numerous championship race and rally drivers in 2004 and is truly a milestone in brake pad material development.

Nominal friction coefficient 0.6 with zero rotor damage and similar dust to original pads.

Application List:
Honda Civic EG/EK DOHC
Honda Civic EK9 Type-R
Honda Prelude 2.2 / 2.3 92-
Honda Integra DC2 Type-R (5 Nut)
Honda Integra DC2 Type-R (4 Nut)
Honda Integra DC5 Type-R (Brembo)

Mitsubishi Evo 3 / 4, VR4, FTO Mivec Twin Pot
Mitsubishi Evo 5 / 6 / 7 (Brembo Caliper)

Nissan Skyline GTR32-34 (Nissan Caliper)
Nissan Fairlady 300ZX 90-94' (Nissan Caliper)
Nissan 350Z Z33 (Brembo Caliper)

Proton Satria / Wira 1.6 / 1.8
Proton Putra 1.8
Proton Perdana 2.0 / 2.0 V6

Subaru WRX 96-98'
Subaru Forester SF Turbo
Subaru WRX GC 2.0 / 2.2 Turbo 98- (Subaru Caliper)
Subaru WRX GC STI (Subaru Caliper)
Subaru WRX GD STI 2001 (Brembo Caliper)

Willwood Dynalite Caliper 101mm x 62mm x 12mm

Ap Racing CP3345D44 Caliper 114mm x 50mm x 16mm

EBC YellowStuff Ultimate Race Brake Pads
From Rm500.00-900.00+




*Price might change without notification, kindly contact us thru SMS 012 - 3300 279 or E-Mail [email protected] to confirm the price. Shipping & installation service provided with extra charges, please send us your address to know shipping charge. Thanks.
 

Attachments

Last edited:

pcmoddingmy

1,000 RPM
Senior Member
Mar 23, 2006
1,147
101
1,663
www.pcmoddingmy.com
Hi Eddie, do u have for Levin twinpot?
 

eowk_3456

1,000 RPM
Senior Member
Thread starter
Sep 26, 2005
1,128
16
1,638
kl
today BUMP~~~~~~~~~~~~~~~~~
 

eowk_3456

1,000 RPM
Senior Member
Thread starter
Sep 26, 2005
1,128
16
1,638
kl
Bump~~~~~~~~~~~~~~~~~~~~~~~~~~
 

eowk_3456

1,000 RPM
Senior Member
Thread starter
Sep 26, 2005
1,128
16
1,638
kl
Bump~~~~~~~~~~~~~~~~~~~~~~~
 

eowk_3456

1,000 RPM
Senior Member
Thread starter
Sep 26, 2005
1,128
16
1,638
kl
Bump~~~~~~~~~~~~~~~~~~~~~
 
Status
Not open for further replies.

Random Post Every 5 Minutes

hi all
i planned to change engine (stock wira 1.5 manual 1993)
my stock engine now aged 12 yrs and clock mileage 280k already
so now engine temperature unstable (increase if drive >120kmh) n fuel consumption goes up (rm50 around 400km only --- b4 u can get 500km++)
the car + engine served me well n i'm going to stick with this old wira n change the engine only

one wshop quote me 4g91 engine full installation + JPJ registration RM2800
is it ok to go for it?

he said this engine is fairly...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience