- Mar 23, 2006
- 1,077
- 5
- 1,638
same laa...i also keep that article...he3sumthing to share with you guys playing with this stroker motor.. take a look at all the attachment below..i've been keeping this in my personal collection for quite sum time
same laa...i also keep that article...he3sumthing to share with you guys playing with this stroker motor.. take a look at all the attachment below..i've been keeping this in my personal collection for quite sum time
alo jinkl , yesterday really ar u with uncle zainal at millenium. very shy la u he3.master pulak, curi spectre kang :P
would agree here, just take the 100mm crank from 4g64 normal one n plonk it into ur block , done
hehehehhealo jinkl , yesterday really ar u with uncle zainal at millenium. very shy la u he3.
So,bro proPIPING,yes it's posibble but you need to make a brass bushing at the small end bcoz the diesel piston pin is bigger than evo/fairlady piston...
so u also 2.2 stroker??yeap this is a 2.2 ltr stroker
Bump: yeap this is a 2.2 ltr stroker
6bolt 100mm crank?? u mean 4g64 with 6bolt crank??:rolleyes::rolleyes:in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...
Bump: in potong kereta in kepong i saw 6bolt 100mm crank today and heaps of 7bolt too...