I'm pretty sure some of the members do have the anoying rattle sound when they close the door. Blacksamurai does have this problem too. Well fear no more as this can be solve easily. Just follow the instruction below. I will forward the pictures to Blacksamurai to post it up together to get a better understanding.
BS,
Could you pls help me out and if possible make this a sticky as well? thanks
Well, basically.
Step 1, Remove the door panel. You should be able to figure this out easily enough.
Once the panel is off locate the two bolts in this picture
PICTURES WILL BE POST BY BLACKSAMURAI
Step 2. As you can see, these are attached to little brushes that hold tension on the window. And I guess they wear down, so lets adjust them to tighen things up.
If you still exprience window loose then see that besides these brushes, there are a couple more bolts around the top part, that get loose. Beneath them they have rubber blocks.
Tighten them too.... and it's all good!
Wallah..here you have a nice solid sound again when closing your door.
Rgds,
Ace:_:
BS,
Could you pls help me out and if possible make this a sticky as well? thanks
Well, basically.
Step 1, Remove the door panel. You should be able to figure this out easily enough.
Once the panel is off locate the two bolts in this picture
PICTURES WILL BE POST BY BLACKSAMURAI
Step 2. As you can see, these are attached to little brushes that hold tension on the window. And I guess they wear down, so lets adjust them to tighen things up.
If you still exprience window loose then see that besides these brushes, there are a couple more bolts around the top part, that get loose. Beneath them they have rubber blocks.
Tighten them too.... and it's all good!
Wallah..here you have a nice solid sound again when closing your door.
Rgds,
Ace:_:
Last edited: