1. Bump posts missing? We are spring cleaning the Forums so these posts are being removed to optimize the database further. Don't be concerned, you can continue to do whatever you do. Will be developing the site further as well through the coming weeks so do watch out for those! You can close this notice now
    Dismiss Notice

Skunk2 Pro 2 B-series question

Discussion in 'Honda' started by D-IV, Nov 22, 2009.

  1. D-IV

    D-IV 15 Year | Platinum

    Joined:
    Mar 11, 2006
    Messages:
    262
    Likes Received:
    1
    Anyone has any info on the clearance of the SK2 pro 2 series on a bone stock b16a block with built head. I was thinking of buying the cam and putting it on my stock block. Don't worry, its boosted :biggrin:

    My main concern is the clearance on the P30 piston. Max rev would be around 8500rpm. I plan on selling my civic coz i'm retiring but if there's no buyer until February next year, i'm gonna take the whole engine out and put some more stuff in.

    So any info? And yeah, i tried googling and don't worry, i know about the N/A cams on boosted engine is not good bla bla bla. I just wanna know the clearance issue :smile:
     
  2. E-Tech

    E-Tech Senior Member
    Senior Member

    Joined:
    Jun 28, 2005
    Messages:
    1,113
    Likes Received:
    254
    A freind has 2 set of those... 1 set new and 1 set second hand.
    Haven't put it in yet...and i haven't done the maths... so can't help you out now...

    I dun have the valve lift spec & duration spec plus the recomended cam setting, if you have, post it and I will try to simulate...
    Tq:biggrin:
     
  3. D-IV

    D-IV 15 Year | Platinum

    Joined:
    Mar 11, 2006
    Messages:
    262
    Likes Received:
    1
    I used to have their catalogue a year ago when i was thinking of putting it in but lost it somewhere. It has the recommended cam degree there BUT, it wasn't specific for a b16a. Maybe you can do the motor clay to check the clearance provided the head and block are virgin hehe.

    But as a start here's the degree and lift spec off the website

    Pro Series B-Series DOHC VTEC

    I'll try to find the catalogue link later and post it. And probably you can ask around if any of the people at sepang has pro 2's on a b16a before. I know the B16a is a little bit small for the pro 2 but on a boosted engine, it'll be a different characteristic.

    ---------- Post added at 06:54 PM ---------- 6 hour anti-bump limit - Previous post was at 05:39 PM ----------

    Try downloading the catalogue here

    Skunk2 2007 Catalog

    [​IMG]
     
    #3 D-IV, Nov 22, 2009
    Last edited: Nov 22, 2009

Share This Page