satria rear disc problem

CyborgR

1,000 RPM
Senior Member
Nov 15, 2003
1,110
19
3,138
Perak
Visit site
i having trouble with my satria rear brake issue, there no direct response after pulling and is not grippin at all after i pulling it, make me hard to even engage a handbrake turn, is there anyhow to improve the rear brake system??? the disc and pad are quite ok still, i wondering why it wasnt gripping at all..

thanks :confused:
 

8229

Known Member
Senior Member
Jan 3, 2008
118
6
1,518
i service the caliper, change to new oil seal for the caliper, then change the handbrake cable, then its ok, but not sure if u need to change the handbrake cable or not....
 

Yong_5290

3,000 RPM
Senior Member
Nov 4, 2004
3,637
49
3,148
Klang
hotmail.com
so u mean when u dori dori the rear disc doesnt bite enuf o the bite is so poor its like nothing?
 

CyborgR

1,000 RPM
Senior Member
Thread starter
Nov 15, 2003
1,110
19
3,138
Perak
Visit site
yong: its like nothing,that y quite frustrated

8229: i will check the cable and caliper, thanks mate
 

CyborgR

1,000 RPM
Senior Member
Thread starter
Nov 15, 2003
1,110
19
3,138
Perak
Visit site
but my gen2 rear disc handbrake work like wonder...damn can i just swap into it..gosh
 

artworkz

500 RPM
Senior Member
Jul 3, 2008
706
119
1,543
JB
u try to loose the hand brake cable. after tat u pump the the brake pedal more den 30 times, if can pump the brake wif engine start. after tat u tighten back the handbrake cable. should be ok after u do tis.
 

CyborgR

1,000 RPM
Senior Member
Thread starter
Nov 15, 2003
1,110
19
3,138
Perak
Visit site
just tested it, its better then before but handbrake pull still cannot stop on the straight...the mech said possible the cable are too long.. its so damn troublesome, guess hydraulic handbrake is my last solution
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
just tested it, its better then before but handbrake pull still cannot stop on the straight...the mech said possible the cable are too long.. its so damn troublesome, guess hydraulic handbrake is my last solution
hydraulic handbrake is not a solution... hydraulic cannot withstand high pressure for long period of time... datz why handbrake use cable...
 

CyborgR

1,000 RPM
Senior Member
Thread starter
Nov 15, 2003
1,110
19
3,138
Perak
Visit site
ya..have to giv up autokhana or just join without using the stupid handbrake..sien

---------- Post added at 03:33 PM ---------- Previous post was at 03:33 PM ----------

ya..have to giv up autokhana or just join without using the stupid handbrake..sien:banghead::banghead::banghead::banghead:
 

SkYwAlKeR

Over 10,000 RPM!
Senior Member
Mar 12, 2005
10,139
300
5,183
ePoh ~ malacca
Visit site
ya..have to giv up autokhana or just join without using the stupid handbrake..sien

---------- Post added at 03:33 PM ---------- Previous post was at 03:33 PM ----------

ya..have to giv up autokhana or just join without using the stupid handbrake..sien:banghead::banghead::banghead::banghead:
make additional hydraulic ebrake lo..
 

Random Post Every 5 Minutes

i cant believe it when someone try break into my 2 month old SGTI at my office basement carpark. Blady bastard tried to use wires and screwdriver to unlock my passenger door.Thank god i had the safety metal plate installed when i got the car. I can see the safety metal plate is dented . God bless me coz the bastard didnt manage to get in but my door handle lock is broken and my passenger door lower corner has some minor scratches and dent. :( :( :( . He must be trying to pry the door with...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience