Rempojo coating

[wayne84]

Good Seller and very good workmanship .. i will recommend my fren to do the coating with him ..

 

[rempojo]

Good Seller and very good workmanship .. i will recommend my fren to do the coating with him ..

tq wayne. also thanks for ur support

 

[GEFORCEXTREME]

I want to coat my engine valve cover too, but I don't know how to remove it and send it to you. Got exchange basis for 4g92p SOHC? :_(

 

[rempojo]

I want to coat my engine valve cover too, but I don't know how to remove it and send it to you. Got exchange basis for 4g92p SOHC? :_(

we have three finishing and two different material.
1st texture finish. surface kind like sand paper grid 80. this is not powder coat material.
2nd wrinkle finish. as u can see this wrinkle finish on most MIVEC blacktop or red VTEC valve covers
3rd Candy Glossy finish. Shining surface.
u may refer to my facebook

material no 2nd and 3rd is powder coat.
please let mo know which is the finish u plan to do.

we also can arrange for u to remove ur valve cover by send it to nearby workshop. u may need to extra rm20 for it.

sorry bro. i dont have spare 4g92 valve cover.

 

[cikaro71]

sorry bro. i dont have spare 4g92 valve cover.

what about 4g63 evo iv? do you have spare?

 

[rempojo]

what about 4g63 evo iv? do you have spare?

sorry. 4g63 e4 also don't have

 

[cikaro71]

sorry. 4g63 e4 also don't have

ok, will start looking. btw, can u quote for:

a. candy blue and no color for wording:

b. candy blue and red color for wording:

 

[rempojo]

ok, will start looking. btw, can u quote for:

a. candy blue and no color for wording:

b. candy blue and red color for wording:

pm send

---------- Post added at 02:55 PM ---------- 6 hour anti-bump limit - Previous post was at 01:46 PM ----------

WRINKLE BLUE
b4

blasted.. cover surface free from old coating oil and grease.. ready to re-coating

Done

posing time

Finishing: Wrinkle / GLOSS LEVEL = 20-30% ON 60 DEGREE METER
Hi Temp 200 degree Celsius Oven bake Electrostatic COATING Material.
Most durable coating you can trust than 2k paint
RM170. Highly negotiable
0123559818 JOE
BANDAR TEKNOLOGI KAJANG, KAJANG SELANGOR
WORLDWIDE COURIER ACCEPTED =p

Monday - Friday: Send your item today and receive it the following evening
Saturday & Sunday: Send your item early in the morning and you will receive it in the evening the very same day. The whole process usually takes around 4-5 hours to be completed.

I'll do my very best to ensure all items sent to me to be completed in an estimated time given.

This is a part-time job, you are advised to call beforehand so I can estimate the completion period.

SEE MORE IN FACEBOOK Log masuk | Facebook​

 

[rempojo]

SPECIALIZE IN POWDER COATING VALVE COVER

​

The wrinkle is exactly same as u can see on most TYPE-R & MIVEC Black Top Valve cover

Normal engine working temperature around 90 to 120 celcius (correct me if im wrong)
But this coating baked over 200celcius/400Fahrenheit to get WRINKLE finishing

Finishing: Wrinkle / GLOSS LEVEL = 20-30% ON 60 DEGREE METER
Hi Temp 200 degree Celsius Oven bake Electrostatic COATING Material.
Most durable coating you can trust than 2k paint
RM170. Highly negotiable
0123559818 JOE
BANDAR TEKNOLOGI KAJANG, KAJANG SELANGOR
WORLDWIDE COURIER ACCEPTED

Follow us on Facebook by clicking here. Lot more photo inside. contain is public


Candy Glossy Finish two layer coating

Finishing: Candy/Glossy
Sure TOUGH, DURABLE, LASTING AND HARD TO PEEL OFF THAN 2K PAINT because its 2 Layer of Powder Coating.
Hi Temp over 200 degree Celsius Oven bake Electrostatic COATING Material.
RM190. Negotiable

0123559818 JOE
BANDAR TEKNOLOGI KAJANG
WORLDWIDE COURIER ACCEPTED

Follow us on Facebook by clicking here. Lot more photo inside. contain is public


TEXTURE FINISH (NOT POWDER COAT)

Finishing: Texture / flat / sparkling
COATING Type: Not Powder
HI-TEMP
RM150
0123559818 JOE
BANDAR TEKNOLOGI KAJANG, KAJANG SELANGOR
WORLDWIDE COURIER ACCEPTED

Monday - Friday: Send your item today and receive it the following evening
Saturday & Sunday: Send your item early in the morning and you will receive it in the evening the very same day. The whole process usually takes around 4-5 hours to be completed.

I'll do my very best to ensure all items sent to me to be completed in an estimated time given.

This is a part-time job, you are advised to call beforehand so I can estimate the completion period.

Follow us on Facebook by clicking here. Lot more photo inside. contain is public


​

 

[cikaro71]

bro, my cam cover on the way. already post it this afternoon, maybe tomorrow u will receive it. pse powdercoat it:

from this:

to this (candy blue with red wording):

 

[rempojo]

CANDY BLUE RED LETTER

candy finish effect
with flash

without flash

Finishing: Candy/Glossy
Sure TOUGH, DURABLE, LASTING AND HARD TO PEEL OFF THAN 2K PAINT because its 2 Layer Powder coat.
Hi Temp over 200 degree Celsius Oven bake Electrostatic COATING Material.
RM190.

0123559818 JOE
BANDAR TEKNOLOGI KAJANG
WORLDWIDE COURIER ACCEPTED =p

Monday - Friday: Send your item today and receive it the following evening
Saturday & Sunday: Send your item early in the morning and you will receive it in the evening the very same day. The whole process usually takes around 4-5 hours to be completed.

I'll do my very best to ensure all items sent to me to be completed in an estimated time given.

This is a part-time job, you are advised to call beforehand so I can estimate the completion period.

join me on FACEBOOK by typing rempojo coating​

 

[cikaro71]

received my cam cover today. so here we go.

before:

compare:

final/installed (but pse ignore my plug cover, it is my 'product' not rempojo:redface::redface:):

nice and good job:top::top:. thanks.

side note: in case anyone need e4/5/6 cam cover, i got 1.

 

[rempojo]

tenkiu cikaro71. in out everything is already blue now..

---------- Post added at 02:07 AM ---------- 6 hour anti-bump limit - Previous post was at 01:15 AM ----------

1JZ Project..
Orange Texture rocker cover & Intake
Aluminium silver for other part

received

sandblasted

after applying powder n put sum ajinomoto now coted part ready to cook..

cooked like cookies

ready to serve up

throtle body, intake and rocker cover will b done once cure from fever..
:s:​

 

[GEFORCEXTREME]

Can you do rims? I've got a set of rims that was DIY sprayed poorly. I want something like orange or green.

 

[lilwhite]

which kind of coating the the most durable and which can endure the highest heat.....how how much will it cost for it to be done on my 4agze valve cover?please pm...