1. Bump posts missing? We are spring cleaning the Forums so these posts are being removed to optimize the database further. Don't be concerned, you can continue to do whatever you do. Will be developing the site further as well through the coming weeks so do watch out for those! You can close this notice now
    Dismiss Notice

Perdana v6 : Road to 300whp.... and beyond

Discussion in 'Proton Perdana Forums' started by marsha1l_v6, Jan 24, 2017.

  1. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    Update*

    Send for routine service/check and install new fuel pump due to car running lean (spark plug is not brownish color, white/clear indicate its lean)

    Unfortunately,new fuel pump short and affected ecu(ecu was warm when it happen).

    no engine light on the cluster meter. after few hours debug,long story short, ecu confirm faulty cause by the fuel pump. Unable to supply signal/voltge to injector/fuel pump.

    now waiting for ecu to be repair and once done, create a fuse for fuel pump, since current fuel system does not have any fuse connected to fuel pump, just relay.

    Anyway, if anyone has rechip ecu,do offer me best price ya ! :stickyman:
     
  2. sweelt

    sweelt Well-Known Member

    Joined:
    Nov 6, 2016
    Messages:
    2,141
    Likes Received:
    196
    ouch...pakai tongkat,
    about the 3 puck clutch, my car use almost daily. Traffic jammed make it worst, 1/2 release sure burn it.
    after burn the 4 puck, can follow uncleVR dy. Use round clutch...hehehe :smokin:
     
    #142 sweelt, Oct 1, 2017
    Last edited: Oct 1, 2017
  3. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    Do u use oem cover or using every?

    Anyway, found that the culprit is due to fuel pump polarity are swapped..

    Luckily, ecu repair is done.. Cost me 4xx :bawling:

    Should I return the fuel pump? Will they layan? Bought at Ken racing :confused:
     
  4. sweelt

    sweelt Well-Known Member

    Joined:
    Nov 6, 2016
    Messages:
    2,141
    Likes Received:
    196
    exedy one set.
     
  5. spawn_net

    spawn_net Member

    Joined:
    Jan 26, 2015
    Messages:
    147
    Likes Received:
    27
    HI Guys..

    Any tried using the GTO 3000 V6 TD04 turbo to replace the TD025L for the 6a12 twin turbo?
     
  6. ^pomen_GTR^

    ^pomen_GTR^ Senior Member
    Senior Member

    Joined:
    May 13, 2010
    Messages:
    7,510
    Likes Received:
    1,688

    or u can try look for exedy copper mix round clutch type...

    grip better than full organic round clutch...and without jumpyness of 3-4puck type...



    not sure here... but plenty of oversea user did that...easily
     
  7. spawn_net

    spawn_net Member

    Joined:
    Jan 26, 2015
    Messages:
    147
    Likes Received:
    27
    Yeah.. the engine in Malaysia is relatively cheap.. If possible to swap from the GTO to 6a12T.. that will be great.
     
  8. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    thought about td04 if i go for 6a12TT route last time.. heard turbo wont be reliable, especially the rear one due to heat.

    got arr? most shop only organic/puck style clutch:hmmmm:
     
  9. lsm1991

    lsm1991 Senior Member
    Senior Member

    Joined:
    Sep 30, 2011
    Messages:
    1,195
    Likes Received:
    130
    I hope you mean swap the turbos alone, If you mean the whole engine, not possible...... or its very impractical to swap the 6a12 into the gto. Too much effort.
     
  10. spawn_net

    spawn_net Member

    Joined:
    Jan 26, 2015
    Messages:
    147
    Likes Received:
    27
    Yes bro... Just the turbos, intake (if it fits) and maybe pistons.. cos not sure 6a12T pistons can support two TD04
     
  11. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,003
    Likes Received:
    8,125
    Seems they have not hard to find. My mechanic ask me before also, whether I wanted those but got to look for it.
     
  12. lsm1991

    lsm1991 Senior Member
    Senior Member

    Joined:
    Sep 30, 2011
    Messages:
    1,195
    Likes Received:
    130
    ahh read what you posted again.... am bodo, completely misunderstood you haha
     
  13. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    just checked with my mechanic this morning, yes can fit and use..but the rear turbo prone to fail due to heat.

    didnt check on intake and pistons.

    cant find during my search at couple of shop @ sunway and mudah :bawling:
     
  14. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    guys need help @ 1.5k is there any good daily drive clutch can handle 300lb/ft torque?

    choices are
    - competition clutch stage 4
    -exedy 3/4 puck

    i've done reading and google... best is to get full face clutch ceramic pad ( daily drive reason).. but cant find it in mudah other than organic..for now choices are above from mudah. yet to survey at sunway shop.

    I'll be rebuilding my gbox this month.. installing semi lsd and send flywheel to machine shop to be lighten, remaining clutch set only, current one started to slip.

    do chip in your opinion. thanks
     
  15. kurt_629

    kurt_629 5 Year | Silver

    Joined:
    May 2, 2013
    Messages:
    872
    Likes Received:
    54
    not sure if helps, recently i change my clutch plate as it has already worn out.

    I ever use those sport clutch before, OS Giken..
    if you are looking for daily drive, would advise you to stick to original/stock type..

    its really difficult to engage or to step on..

    stock can also handle 300whp, no issue.
     
  16. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    iinm , cover plate that makes soft/hard to step on.

    well nothing much available for sub 1.5k price in market here....

    gonna jump and go for cc 6puck sprung clutch:smokin:
     
  17. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,003
    Likes Received:
    8,125
    Yes, the pressure plate, but if with harder springs it helps the clutch plate attached better, but heavy on the legs.....lol:driver:
     
  18. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    a quick update for those who follow...gbox has been rebuild...end up with 6 puck..now softer than oem clutch...but better traction

    next post will reveal dyno chart
     
  19. ^pomen_GTR^

    ^pomen_GTR^ Senior Member
    Senior Member

    Joined:
    May 13, 2010
    Messages:
    7,510
    Likes Received:
    1,688

    exedy organic with copper mix clutch plate....
    exedy heavy duty clutch cover
     
  20. marsha1l_v6

    marsha1l_v6 5 Year | Silver

    Joined:
    Aug 1, 2013
    Messages:
    627
    Likes Received:
    113
    thx ..but i sudah beli and rebuild with goodies..

    bought 6 puck cc clutch
     

Share This Page