nameejokerx
Active Member
So rich.:proud: Change gbox like change shirt.yep, for V6 better go rebuild the gbox.
for me, gbox also kong last week, but RVR engine, so i bought 2nd hand gbox je la..
So rich.:proud: Change gbox like change shirt.yep, for V6 better go rebuild the gbox.
for me, gbox also kong last week, but RVR engine, so i bought 2nd hand gbox je la..
yep. more like a rm550 shirt..So rich.:proud: Change gbox like change shirt.
Haha. Just booked only.yep. more like a rm550 shirt..
but its a "keperluan", no gearbox, cannot move.
so have to spend the money.
not like u, buy e-manage, thats a "kemahuan".
duit byk, everything also have.
gile la, play with MJ..Haha. Just booked only.
Need to see how overhaul going.
If got extra backup from MJ sure dyno.
Hahaha.
But. No MJ to play. Che ta been taken.gile la, play with MJ..
wakaka..But. No MJ to play. Che ta been taken.
Sent from my GT-N7105 using Tapatalk
hi bro, need some help here. know that ur using rvr auto same as mine. few month back my gb kong also. found 2nd hand rs rvr gb and since then im having this mounting issue. the mech couldnt find the same mounting for the gb, so he modified the mount and now weird noise came out. what type of mount to use?yep, for V6 better go rebuild the gbox.
for me, gbox also kong last week, but RVR engine, so i bought 2nd hand gbox je la..
which mounting bracket is it?hi bro, need some help here. know that ur using rvr auto same as mine. few month back my gb kong also. found 2nd hand rs rvr gb and since then im having this mounting issue. the mech couldnt find the same mounting for the gb, so he modified the mount and now weird noise came out. what type of mount to use?
the gb side and front that always kong. custom made with thick steel only, no rubber? any vibration?which mounting bracket is it?
my front use v6, left use rvr, right use v6/sei (cant remember), rear is custom made with thick steel, made to look like ori.
no no. the 'mounting bracket' is custom made (from gbox to mounting point).the gb side and front that always kong. custom made with thick steel only, no rubber? any vibration?
emmm, let me clarify a bit more:ill try the v6 mount for front, suspect he use sei mount that cant support the heavy engine & 4wd gb. ur left rvr mount bought brand new or h/cut ?
im confused here. u change the inside rubber to v6 rubber? done all this at najib place?emmm, let me clarify a bit more:
- the front mounting bracket is from the RVR engine.
- the right-side mounting bracket (on top of gbox) is from SEI (i think, can exactly remember if its SEI/V6 coz never open/change it since i transplanted the engine 3 years ago).
- the rear mounting bracket (from gbox to rubber mount) is custom made.
- the rubber mountings for all 3 mounting points are from V6.
- the left-side mounting is from the RVR engine itself.
u can buy a full rubber mount to make it tougher and longer lasting.
my front and rear rubber mountings are full rubber.
u have to check also if your engine is aligned properly.
if the engine is tilted (senget) then it may effect the rubber mount to worn out earlier.
ok ok sori sori. i give picture la easier..im confused here. u change the inside rubber to v6 rubber? done all this at najib place?
ok ok sori sori. i give picture la easier..
this is example of mounting (rubber mounting)
front, rear and right side.
this is what i mean for mounting bracket.
this example for right-side (gbox) and rear (gbox)