Modifications done to Inspira

[DM3]

mydvdrom,

do check with gagakhitam as he sells it.
well i also had the 2.5 yrs free service but change it every 5k km using the semi-syn. do it outside for the out of every 10k km at SC.
for me at least shorter intervals with semi also good enough

 

[mydvdrom]

definitely need to change by 8k. I used the semi up to 9k and find the car sluggish. right after service and also cleaning of air filter can feel the car more lively. lolz. anyway, the synthium should be not as good as torco. will give torco a try.

 

[quicksilver7]

Hey, what has everyone done so far?

I'm gonna change to Super Circuit's extractor this weekend, hope it's great cuz the dyno chart promises a lot..

 

[DM3]

Hey, what has everyone done so far?

I'm gonna change to Super Circuit's extractor this weekend, hope it's great cuz the dyno chart promises a lot..

yea some owners did that and loved the power :)

 

[quicksilver7]

yea some owners did that and loved the power :)

I'll let you know the update soon hehe

Bro DM3, you know a good tuner that can squeeze 10% or possibly more out of the car from the ECU by remapping/piggyback?

 

[DM3]

I'll let you know the update soon hehe

Bro DM3, you know a good tuner that can squeeze 10% or possibly more out of the car from the ECU by remapping/piggyback?

u can look for Tromen in our forum he is at bkt jalil & also kenny from Lowyat Forum

 

[Zidane]

Guys,

will the following mod void your warranty:
1. reflash ecu
2. cam pulley
3. camshaft
4. port n polish
5. engine blue print

 

[quicksilver7]

Guys,

will the following mod void your warranty:
1. reflash ecu
2. cam pulley
3. camshaft
4. port n polish
5. engine blue print

Yes surely! But I'm still gonna do it.. This sounds familiar, is it from Powerzone?

DM3, i read kenny's (lowyat) posts there. Not much hp gains it seems. From the torque curve, it seems that he's sacrificing low end torque for roughly 4hp high end gain. Not smtg I'd want.

I'll look for Tromen and see. Thanks :D

 

[Zidane]

Yes surely! But I'm still gonna do it.. This sounds familiar, is it from Powerzone?

DM3, i read kenny's (lowyat) posts there. Not much hp gains it seems. From the torque curve, it seems that he's sacrificing low end torque for roughly 4hp high end gain. Not smtg I'd want.

I'll look for Tromen and see. Thanks :D

No1 and 5 are from Powerzone.

The rest are all what normal shops will recommend.

Thanks.

regards,

 

[DM3]

Guys,

will the following mod void your warranty:
1. reflash ecu
2. cam pulley
3. camshaft
4. port n polish
5. engine blue print

yea it will but no. 1 will just be reset back to original settings, so its ok :)

---------- Post added at 07:38 AM ---------- 6 hour anti-bump limit - Previous post was at 07:36 AM ----------

Yes surely! But I'm still gonna do it.. This sounds familiar, is it from Powerzone?

DM3, i read kenny's (lowyat) posts there. Not much hp gains it seems. From the torque curve, it seems that he's sacrificing low end torque for roughly 4hp high end gain. Not smtg I'd want.

I'll look for Tromen and see. Thanks :D

eh which graph u saw? u can contact him also to confirm. the gain of Hp is at wheel ya Fyi :P
tromen's will be quite similar.

 

[quicksilver7]

eh which graph u saw? u can contact him also to confirm. the gain of Hp is at wheel ya Fyi :P
tromen's will be quite similar.

the graphs at this page: LYN Proton INSPIRA Owners / Fan Thread V13

Any other recommendations? Is Tromen the same as Otromen02 in theinspiratuners forums?

 

[DM3]

the graphs at this page: LYN Proton INSPIRA Owners / Fan Thread V13

Any other recommendations? Is Tromen the same as Otromen02 in theinspiratuners forums?

yeah, i'm not too sure what version he did now if not mistaken/maybe can get up to 10hp with extractor , u can contact him also to confirm.
yes otromen is same person but he dont have dyno as evidence.

 

[quicksilver7]

yeah, i'm not too sure what version he did now if not mistaken/maybe can get up to 10hp with extractor , u can contact him also to confirm.
yes otromen is same person but he dont have dyno as evidence.

Kenny said not much torque increase but 7hp gain. I'm guessing that he's using a generic-fit-all-map. Am looking for someone to custom tune my car..

 

[stix]

hws everyones car doing? rpw aussie has cams for both the 4b10/11. anyone ordered?

 

[sohem]

Sept 2012 Car 4B10

Modded List :

1) 17" Advan RS with RSR
2) ECU Reflash
3) Front Strut Bar + 23mm ARB
4) Mythelogy lighten crank pulley
5) GAB SS fully adjustable
6) change 800c RS Pad
7) LancerGT Spoiler
8) Hotbits Full Set Exhaust System
9) Injen Cold Air Intake


What else can be mod for my car?