Help.. R32 Type M

Discussion in 'Nissan' started by nappx, Feb 12, 2016.

  1. nappx

    nappx Senior Member
    Senior Member

    Joined:
    Sep 13, 2005
    Messages:
    2,538
    Likes Received:
    185
    Hi Nissan Enthausist.

    i'm seeking your help/advice where i can find Brake Pad R32 Type M (OEM/Aftermarket) and Brake Service Kit.

    anyone know can share here.

    thanks
     
  2. e-jump

    e-jump Senior Member
    Senior Member

    Joined:
    Mar 13, 2004
    Messages:
    203
    Likes Received:
    8
  3. ^pomen_GTR^

    ^pomen_GTR^ Senior Member
    Senior Member

    Joined:
    May 13, 2010
    Messages:
    7,510
    Likes Received:
    1,687
    i think the r32 4pot caliper share the same caliper body assy as well as brake pad with toyota and subaru

    r32 4pot=1st gen hilux 4pot=subaru 4pot

    all identical except the marking (toyota/subaru/nissan on the caliper body)

    ---------- Post added at 02:25 PM ---------- 6 hour anti-bump limit - Previous post was at 02:25 PM ----------

    i think the r32 4pot caliper share the same caliper body assy as well as brake pad with toyota and subaru

    r32 4pot=1st gen hilux 4pot=subaru 4pot

    all identical except the marking (toyota/subaru/nissan on the caliper body)
     
  4. 4gbanger

    4gbanger 5 Year | Silver

    Joined:
    Jun 26, 2013
    Messages:
    1,955
    Likes Received:
    383
    how about aristo 4 pot pads? same as all those?
     
  5. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,003
    Likes Received:
    8,125
    If disc same size and thickness what about the lug PCD and disc offset also may differ. right?

    For brake pads I actually took out and draw the shape on A4 white paper then take to spare part shop ask them to find....hhahhahah
     
  6. KenDiriwan

    KenDiriwan Senior Member
    Senior Member

    Joined:
    Mar 15, 2006
    Messages:
    1,284
    Likes Received:
    225
    That's one hell of an inquiry LOL
     
  7. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    29,003
    Likes Received:
    8,125
    My Sonata III, I did and bring to PH Auto. He send his man in with the drawing and about 15 to 20 minutes later came out with Sonata 5 brake pads. Was relief that pads are common, since same as Sonata 5 means quite a lot of choices......hhahahhahah
     
  8. ^pomen_GTR^

    ^pomen_GTR^ Senior Member
    Senior Member

    Joined:
    May 13, 2010
    Messages:
    7,510
    Likes Received:
    1,687
    yeap...pcd and disc offset probably differ a bit between those car....but brake repair kit/service kit is matching....



    not sure....

    best bet is take the pad sample and go to sparepart shop..usually they have full catalogue complete with pad drawing/dimension...so can straight measure with drawing in catalouge... (me did that the first time looking for scooby pad last time)
     

Share This Page