Helix DSP.2 / P SIX DSP

Discussion in 'ICE -In Car Entertainment' started by kmcheong, Oct 28, 2018.

Tags:
  1. kmcheong

    kmcheong 15 Year | Platinum

    Joined:
    Mar 22, 2006
    Messages:
    1
    Likes Received:
    0
    Helix DSP.2

    Brand New In Box
    8 channels DSP with Burrbrown ADC/DAC, specification below
    COD Location: Puchong, Seri Kembangan
    Price: RM2000

    Helix P SIX DSP

    Brand New In Box
    8 channels DSP with Burrbrown ADC/DAC and 6 channels amplifier
    6x120W RMS @ 4ohm / 230W RMS @ 2ohm
    COD Location: Puchong, Seri Kembangan
    Price: RM4900

    whatsapp/call 012-2340244 to deal


    DSP.2 Specification

    Inputs 6 x RCA / Cinch
    6 x Highlevel speaker input
    1 x Optical SPDIF (12 - 96 kHz)
    1 x Remote In
    Input sensitivity RCA / Cinch 2 - 4 Volts
    Highlevel 3.5 - 11 Volts
    Outputs 8 x RCA / Cinch
    1 x Remote Out
    Output voltage 6 Volts
    Frequency response 10 Hz - 22,000 Hz
    DSP resolution 64 Bit
    DSP power 295 MHz (1.2 billion MAC operations/second)
    Sampling rate 48 kHz
    DSP type Audio signal processor
    Signal converters A/D: BurrBrown
    D/A: BurrBrown
    Signal-to-noise ratio digital input 112 dB (A-weighted)
    Signal-to-noise ratio analog input 107 dB (A-weighted)
    Total harmonic distortion (THD+N) digital input < 0.0008 %
    Total harmonic distortion (THD+N) analog input < 0.002 %
    IM distortion (IMD) digital input < 0.003 %
    IM distortion (IMD) analog input < 0.005 %
    Crosstalk > 90 dB
    Operating voltage 9.6 - 18 Volts (max. 5 sec. down to 6 Volts)
    Current draw < 480 mA
    Max. remote output current 500 mA
    Additional features HEC slot, Ground lift switch, Control Input,
    ADEP circuit, Auto Remote switch
    Dimensions (H x W x D) 40 x 177 x 120 mm /
    1.58 x 6.97 x 4.72”


    HELIX P SIX DSP SPECIFICATION

    Output power RMS / max.

    - @ 4 Ohms Channel A - F: 120 / 240 Watts per channel
    - @ 2 Ohms Channel C - F: 230 / 460 Watts per channel
    - @ 1 Ohm -
    - bridged @ 4 Ohms -
    - bridged @ 2 Ohms -
    Amplifier technology Ultra HD Class D
    Inputs 6 x RCA / Cinch
    6 x Highlevel speaker input
    1 x Optical SPDIF (12 - 96 kHz)
    1 x Remote In
    Input sensitivity RCA / Cinch 2 - 4 Volts or 4 - 8 Volts
    Highlevel 5 - 10 Volts or 10 - 20 Volts
    Input impedance RCA / Cinch 64 kOhms
    Input impedance highlevel 13 Ohms oder 64 kOhms
    Outputs 6 x Speaker output
    2 x RCA / Cinch
    2 x Remote Out
    Output voltage RCA / Cinch 3 Volts RMS
    Frequency response 20 Hz - 44,000 Hz
    DSP resolution 64 Bit
    DSP power 295 MHz (1.2 billion MAC operations/second)
    Sampling rate 96 kHz
    DSP type Audio signal processor
    Signal converters A/D: BurrBrown
    D/A: BurrBrown
    Signal-to-noise ratio digital input 105 dB (A-weighted)
    Signal-to-noise ration analog input 100 dB (A-weighted)
    Distortion (THD) < 0,008 %
    Damping factor > 100
    Operating voltage 10.5 - 32 Volts (max. 5 sec.down to 6 Volts)
    Idle current 2200 mA
    Max. remote output current 500 mA
    Fuse 3 x 20 A LP-Mini-fuse (APS)
    Additional features HEC slot, ADEP circuit, Auto Remote switch, Control Input
    Dimensions (H x W x D) 50 x 260 x 190 mm /
    1.97 x 10.24 x 7.48“
     

Share This Page