May I know is there any shops in KL/PJ that do engine tuning for Myvi 1.5?? How much is the cheapest??
And the result? I think he just reset the AFR lolmy foreman did plug in the device...looks like a obd handheld scanner, plug it in somewhere under the dashboard.....
press some buttons & told me ok edi..my fuel afr cun edi...thats all i knew. charged me rm60 that was 8 years ago.
Tuning only or modification? There's a lot in Sunway...Kepong, etcTuning as in increasing the torque and horsepower
That you need to mod, not tune.....Tuning as in increasing the torque and horsepower
Danz, that one to check error code and reset only, cannot change. Even my VR ECU, the one I change to, cannot change but can add chip and reprogram to change...my foreman did plug in the device...looks like a obd handheld scanner, plug it in somewhere under the dashboard.....
press some buttons & told me ok edi..my fuel afr cun edi...thats all i knew. charged me rm60 that was 8 years ago.
You can't do anything with the stock ECU except reset fault codes. Forget about paying people to "tune" and spend it on mechanical mods. In your case you probably should start off with upgrading your brakes.Tuning as in increasing the torque and horsepower
yala...could be reset the settings....cos at that time i didnt know how it works....That you need to mod, not tune.....
---------- Post added at 08:26 AM ---------- 6 hour anti-bump limit - Previous post was at 08:24 AM ----------
Danz, that one to check error code and reset only, cannot change. Even my VR ECU, the one I change to, cannot change but can add chip and reprogram to change...
Those days, these machines were expensive and not many shops have them, so even for scan and reset code they also charge. My mechanic have them nowadays and uses sometimes just to double check for any fault and it is part of the service and not an additional charge.....yala...could be reset the settings....cos at that time i didnt know how it works....
I thought you selling the Myvi, still want to upgrade?You can't do anything with the stock ECU except reset fault codes. Forget about paying people to "tune" and spend it on mechanical mods. In your case you probably should start off with upgrading your brakes.
If you want to sell your stock 1.5 calipers and rotors, let me know cuz I want them
Cheap & good barely ever fall into the same sentence.May I know is there any shops in KL/PJ that do engine tuning for Myvi 1.5?? How much is the cheapest??
For a different project laI thought you selling the Myvi, still want to upgrade?
Tyre shop Weng Tat in Subang have new units of the 1.5 calipers. Saw them there but did not ask how much?
Noted brother, saw reply in other topic. Anyway, Weng Tat have the caliper if needed....For a different project la