- Jun 15, 2007
- 5,033
- 0
- 1,636
Brand New Wilwood 4 Pot Calipers for Honda - EK,DC,EG,EF.
The calipers can plug on OEM honda or any cars with 0.81 rotors width. These 4 pot calipers give you the ultimate stopping power!!!
Bore Size: 1.38" (35.1mm)
Disk Width: .81" (20.6mm)
Mounting: 5.25" (133.4mm)
Brake Pad Style: # 7112
Inlet Fitting: 1/8-27 NPT
Wilwood Forged Dynalites are the strongest calipers in the class. The process of stress-flow forging re-aligns the metal's grain structure within the contour of the caliper body. This process eliminates the breaks and interruptions to the internal grain structure that occur when machining a straight block billet. The FEA generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges. Incorporating a radius in this transition area substantially increases resistance to deflection and separation under load. Structural deflection and volume displacement tests have proven the Forged Dynalite to outperform all existing styles of this popular caliper size. Without even considering the overall greater strength and reliability of the forging, the reduced deflection tendencies and the resulting decrease in fluid volume displacement translate to increased clamping efficiency with less pedal travel. The bottom line is a taller pedal and better stopping power.
The superior strength of this innovative design is combined with proven performance features from Wilwood's earlier designs. Each caliper is equipped with Wilwood's SRS stainless steel bridge plates. The SRS plates eliminate the bridge wear caused by pad gouging and extend the service life of the caliper body. The spring-loading action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Other standard Wilwood features include high temperature seals and stainless steel pistons to eliminate corrosion and retard heat transfer from the pads. Internal fluid passages eliminate the need for external tubes. Four corner bleed screws assure simple and effective air evacuation from the system and allow one caliper to be mounted in any front, rear, right, or left position. Standard race calipers feature Wilwood's signature bright black anodized finish to resist corrosion and maintain their high tech style.
Brake kits (Calipers, brake pads and performance rotors) : RM3600
Calipers and brake pads: RM2800. Made in USA. Great idea for track and street use. sms or pm me if u r interested 017 937 8668.
The calipers can plug on OEM honda or any cars with 0.81 rotors width. These 4 pot calipers give you the ultimate stopping power!!!
Bore Size: 1.38" (35.1mm)
Disk Width: .81" (20.6mm)
Mounting: 5.25" (133.4mm)
Brake Pad Style: # 7112
Inlet Fitting: 1/8-27 NPT
Wilwood Forged Dynalites are the strongest calipers in the class. The process of stress-flow forging re-aligns the metal's grain structure within the contour of the caliper body. This process eliminates the breaks and interruptions to the internal grain structure that occur when machining a straight block billet. The FEA generated radial transition design eliminates steps and shoulders in the area between the piston housing body and the caliper bridges. Incorporating a radius in this transition area substantially increases resistance to deflection and separation under load. Structural deflection and volume displacement tests have proven the Forged Dynalite to outperform all existing styles of this popular caliper size. Without even considering the overall greater strength and reliability of the forging, the reduced deflection tendencies and the resulting decrease in fluid volume displacement translate to increased clamping efficiency with less pedal travel. The bottom line is a taller pedal and better stopping power.
The superior strength of this innovative design is combined with proven performance features from Wilwood's earlier designs. Each caliper is equipped with Wilwood's SRS stainless steel bridge plates. The SRS plates eliminate the bridge wear caused by pad gouging and extend the service life of the caliper body. The spring-loading action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Other standard Wilwood features include high temperature seals and stainless steel pistons to eliminate corrosion and retard heat transfer from the pads. Internal fluid passages eliminate the need for external tubes. Four corner bleed screws assure simple and effective air evacuation from the system and allow one caliper to be mounted in any front, rear, right, or left position. Standard race calipers feature Wilwood's signature bright black anodized finish to resist corrosion and maintain their high tech style.
Brake kits (Calipers, brake pads and performance rotors) : RM3600
Calipers and brake pads: RM2800. Made in USA. Great idea for track and street use. sms or pm me if u r interested 017 937 8668.
Last edited:
