PRICE:12k
KTS 550 – the multipurpose solution
for automotive workshops
• Workshop PC or laptop together with ESI[tronic]
provides a test station for convenient vehicle diagnosis
• 2-channel multimeter for rapid tracing of faults
through simultaneous measurements on two components
• 2-channel oscilloscope for complicated tests on state-ofthe-
art vehicle-system components – ideally suited for
sensor testing in vehicle,e.g . simultaneous display of both
lambda sensors in a single display image
• One device for both diagnosis and measuring technology
Diagnosis protocol ISO 9141-2,K/L lines
Flasher code
SAE-J1850 DLC (GM,...), SAE-J1850 SPC (Ford)
CAN ISO11898 ISO 15765-4 (OBD)
2-channel multimeter Accuracy 1% of measured value
Voltage, minimum resolution:
0.1 mV, maximum measuring range: 200 V
Current, minimum resolution:
0,1 mA, maximum measuring range: 600 A
resistance, minimum resolution:
100 mOhm, maximum measuring range: 1 M Ohm
2-channel oscilloscope 1-channel operation: 1x 100 K scans/sec
2-channel operation: 2x 50 K scans/sec
Channel 1 zero potential
Connections for OBD line or via universal adapter plus vehicle
spezific cables
Multimeter channel 1: socket yellow (+), blue (-),
channel 2: red (+) and black (ground),
USB, serial, power supply and status indicator
As one of the world’s leading vehicle technology innovators, Bosch has been producing diagnostic equipment for over 75 years and today supports garages with a comprehensive range of diagnostic testers for fault-finding, information and system repairs.
KTS DIAGNOSTIC SCANNER
Bosch’s primary range of test equipment is the KTS range as well as the FSA range of engine motor testers. This is supported by the ESA and BEA range of emission analysers and the Air Conditioning equipment range. The KTS & FSA range are supported by Bosch’s unique DVD-based software, ESI[tronic], which covers service, repair and diagnostic information as well as wiring diagrams and parts identification and cross referencing.
KTS 550 – the multipurpose solution
for automotive workshops
• Workshop PC or laptop together with ESI[tronic]
provides a test station for convenient vehicle diagnosis
• 2-channel multimeter for rapid tracing of faults
through simultaneous measurements on two components
• 2-channel oscilloscope for complicated tests on state-ofthe-
art vehicle-system components – ideally suited for
sensor testing in vehicle,e.g . simultaneous display of both
lambda sensors in a single display image
• One device for both diagnosis and measuring technology
Diagnosis protocol ISO 9141-2,K/L lines
Flasher code
SAE-J1850 DLC (GM,...), SAE-J1850 SPC (Ford)
CAN ISO11898 ISO 15765-4 (OBD)
2-channel multimeter Accuracy 1% of measured value
Voltage, minimum resolution:
0.1 mV, maximum measuring range: 200 V
Current, minimum resolution:
0,1 mA, maximum measuring range: 600 A
resistance, minimum resolution:
100 mOhm, maximum measuring range: 1 M Ohm
2-channel oscilloscope 1-channel operation: 1x 100 K scans/sec
2-channel operation: 2x 50 K scans/sec
Channel 1 zero potential
Connections for OBD line or via universal adapter plus vehicle
spezific cables
Multimeter channel 1: socket yellow (+), blue (-),
channel 2: red (+) and black (ground),
USB, serial, power supply and status indicator
As one of the world’s leading vehicle technology innovators, Bosch has been producing diagnostic equipment for over 75 years and today supports garages with a comprehensive range of diagnostic testers for fault-finding, information and system repairs.
KTS DIAGNOSTIC SCANNER
Bosch’s primary range of test equipment is the KTS range as well as the FSA range of engine motor testers. This is supported by the ESA and BEA range of emission analysers and the Air Conditioning equipment range. The KTS & FSA range are supported by Bosch’s unique DVD-based software, ESI[tronic], which covers service, repair and diagnostic information as well as wiring diagrams and parts identification and cross referencing.
Attachments
-
12.9 KB Views: 1,704
Last edited: