Again PCD 100 - PCD 114

Discussion in 'Car Modification' started by cheng_Y, Mar 21, 2012.

  1. cheng_Y

    cheng_Y 5 Year | Silver

    Joined:
    Aug 5, 2011
    Messages:
    17
    Likes Received:
    1
    I had read & hear a lot of member changing their Wira PCD 100 to PCD 114 using below items

    - EVO 3 Knuckle
    - GSR Knuckle
    - FTO Knuckle
    &
    - Spacer

    But Unfortunaly I bought FTO knuckle wont fit to my Wira SE 2004 drive shaft. (The drive shaft Gigi no equal)

    Just to ask which knuckle just plug & play for Wira without change the drive shaft ( Front Set, rear no problem?

    Why change PCD 100 to PCD 114?
    - Fit pretty after market offset rim, such as Buddy club P1 Racing offset 22 / 27.
     
  2. BoxCarRacer

    BoxCarRacer Senior Member
    Senior Member

    Joined:
    May 7, 2008
    Messages:
    527
    Likes Received:
    103
    Why not just drill the hub and relocate the stud to PCD 114? it is much easier. I did that on my neo before for PCD 114 -> 100 conversion and after 5 years, i have not encountered any problem with it.

    Please use a proper center cone in between the hub and the rims. That what makes the wheel centered onto the hub.

    Btw, my 15" P1 Kosei buddy club with offset +27 is PCD 100. What rim size you're on?
     
    #2 BoxCarRacer, Mar 21, 2012
    Last edited: Mar 21, 2012
  3. DanzEterna

    DanzEterna Moderator
    Moderator Senior Member

    Joined:
    Nov 1, 2007
    Messages:
    15,923
    Likes Received:
    3,371
    simplest way just get a set or pcd 100-114.3 spacers. bout rm300++.
    but its better to get the hubs drilled.
    i manage to find 114.3 x 4 8jj/9jj p1 buddyclub 17" white.

    many 114.3 x 5 in the market.
     
  4. BoxCarRacer

    BoxCarRacer Senior Member
    Senior Member

    Joined:
    May 7, 2008
    Messages:
    527
    Likes Received:
    103

    Yeah. About the same cost of drilling those hubs. The problem with spacers are that they are thick and its affecting your wheel offsets.
     
  5. slipar

    slipar Senior Member
    Senior Member

    Joined:
    Apr 29, 2006
    Messages:
    502
    Likes Received:
    61
    are you sure your fto knuckle cant fit to wira..
     
  6. cheng_Y

    cheng_Y 5 Year | Silver

    Joined:
    Aug 5, 2011
    Messages:
    17
    Likes Received:
    1
    BoxCar Racer - the outer diameter of neo hub is bigger compare with wira. It will unable to drill the 114.3 hole with wira hub, the hole is too near to the end of the hud diameter (Too dangerous)

    Danzeterna - dun wan use spacer. If use P1 racing 16inch 7.5j offset +22 PCD114.3 + another space 1/2 inch = I get offset +10.. too much for wira.. Target offset for my setting is +27 or +22 is enough..

    Slipar - Yup, from the foreman. But, I might tipu by halfcut ppl (Not sure). As I know FTO,RVR,Eterna. the hub is same.. Maybe the gigi of the CV joint is different or the drive shaft diameter is different. SO head ace...
     
  7. BoxCarRacer

    BoxCarRacer Senior Member
    Senior Member

    Joined:
    May 7, 2008
    Messages:
    527
    Likes Received:
    103
    This might sound ridiculous but is it possible to change the whole drive shaft to the older version?
     
  8. ^pomen_GTR^

    ^pomen_GTR^ Senior Member
    Senior Member

    Joined:
    May 13, 2010
    Messages:
    7,479
    Likes Received:
    1,682
    just get evo3 whole knuckle set front and rear
     
  9. minibeany

    minibeany Member

    Joined:
    Apr 30, 2017
    Messages:
    91
    Likes Received:
    1
  10. gunnerzz

    gunnerzz 5 Year | Silver

    Joined:
    Jul 3, 2014
    Messages:
    1,502
    Likes Received:
    494
  11. kaihoong

    kaihoong Member

    Joined:
    Jun 1, 2019
    Messages:
    88
    Likes Received:
    3
    Might you share your Wira SE suspension setup for riding and handling experience to me. Engine remain 1.5 or already convert
     
  12. ixeo

    ixeo Senior Member
    Senior Member

    Joined:
    Jun 26, 2005
    Messages:
    4,426
    Likes Received:
    2,890
    Forgive my stupidity.. that's a lot of work for the rims. Unless as part of the change you get to upgrade to Evo brakes as well then its worth while..
     
  13. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    28,530
    Likes Received:
    8,058
    minibeany likes this.
  14. sweelt

    sweelt Well-Known Member

    Joined:
    Nov 6, 2016
    Messages:
    2,011
    Likes Received:
    174
    #14 sweelt, Jun 25, 2019
    Last edited: Jun 25, 2019
  15. vr2turbo

    vr2turbo 5 Year | Silver
    Helmet Clan Moderator

    Joined:
    May 11, 2010
    Messages:
    28,530
    Likes Received:
    8,058
    Both my Hyundai and VR running 8 holes rims......lol
     
  16. lsm1991

    lsm1991 Senior Member
    Senior Member

    Joined:
    Sep 30, 2011
    Messages:
    1,067
    Likes Received:
    115
    i pakai real 8 hole rims.... all 8 fully utilized
     
  17. minibeany

    minibeany Member

    Joined:
    Apr 30, 2017
    Messages:
    91
    Likes Received:
    1
    how? and why need to use all 8 holes?
     
  18. lsm1991

    lsm1991 Senior Member
    Senior Member

    Joined:
    Sep 30, 2011
    Messages:
    1,067
    Likes Received:
    115
    how? its special, because you can OR funny & stupid depending on who you ask.
    why? got to ask the previous owner

    actually trailers use 8 lug wheels right? i can claim to drive a mini trailer~
     
    sweelt and ixeo like this.
  19. sweelt

    sweelt Well-Known Member

    Joined:
    Nov 6, 2016
    Messages:
    2,011
    Likes Received:
    174
    is special indeed, just little extra work when remove all 32 bolts.
     
  20. lsm1991

    lsm1991 Senior Member
    Senior Member

    Joined:
    Sep 30, 2011
    Messages:
    1,067
    Likes Received:
    115
    52 remember, wink wink~
     

Share This Page