Welcome to AfterTwelve E-Garage!!!
We do shipping internationally / COD / Credit card accepted.
We provide installation and painting as well.
Some item's price quoted below including installation or painting.Please take note.
Any kit that you are interested but not listed here, please contact us.
For order/enquiry, please contact JACK 012.312.7113.
Pls click to Visit After Twelve E-Garage
Introducing PROFOAM:
-A foam that employs a two part cataytic-curing formula that will expand and harden to a Ultra-lightweight 'CLOSED CELL' semi rigid structural foam.
-Its a long lasting, fine cellular 100% (H) CFC free Polyurethane based insulation and construction foam for automotive applications and many more.
-ProFoam cures by reacton to moisture from the air and moisture from the substrates.
ProFoam:
-Dust and water proof
-Vibration and sound proof
-Non corrosive on metals
-Ultra-lighweight / paintable
-Ultra Rigid with energy absorption
ProFoam HELPS to:
-Strengthen and siffen the car structure and improve torsional rigidity.Thus reduce vehicle bodyroll and improve handling as well.
-Seals off hollow section to block out and absorb noise, vibration and harshness.
Application:
-Apply at the undercarriage of vehicle
Price:
RM399 onwards
**Price depends on the type of vehicle.
Duration: 1 to 1.5 hours
-Firstly we need to clean the vehicle undercarriage coz normally it will full of oil and dirt.
-After cleaning we will tape on the "hole" on the undercarriage to prevent foam coming out from everywhere.
-Whn sealing is done, we will inject the foam inside the undercarriage and it will seal off the hollow sections.
-Injection takes about 5-10mins.
-After that we will leave it for about 30mins to let the foam fully seals off all hollow section and start moisute with air.
-Foam mosturing process is about 30mins*.
* After 30mins you may take your vehicle and drive home.But for the foam to moiture 100%, it takes about 1 week time.
Customer car:
We do shipping internationally / COD / Credit card accepted.
We provide installation and painting as well.
Some item's price quoted below including installation or painting.Please take note.
Any kit that you are interested but not listed here, please contact us.
For order/enquiry, please contact JACK 012.312.7113.
Pls click to Visit After Twelve E-Garage
Introducing PROFOAM:
-A foam that employs a two part cataytic-curing formula that will expand and harden to a Ultra-lightweight 'CLOSED CELL' semi rigid structural foam.
-Its a long lasting, fine cellular 100% (H) CFC free Polyurethane based insulation and construction foam for automotive applications and many more.
-ProFoam cures by reacton to moisture from the air and moisture from the substrates.
ProFoam:
-Dust and water proof
-Vibration and sound proof
-Non corrosive on metals
-Ultra-lighweight / paintable
-Ultra Rigid with energy absorption
ProFoam HELPS to:
-Strengthen and siffen the car structure and improve torsional rigidity.Thus reduce vehicle bodyroll and improve handling as well.
-Seals off hollow section to block out and absorb noise, vibration and harshness.
Application:
-Apply at the undercarriage of vehicle
Price:
RM399 onwards
**Price depends on the type of vehicle.
Duration: 1 to 1.5 hours
-Firstly we need to clean the vehicle undercarriage coz normally it will full of oil and dirt.
-After cleaning we will tape on the "hole" on the undercarriage to prevent foam coming out from everywhere.
-Whn sealing is done, we will inject the foam inside the undercarriage and it will seal off the hollow sections.
-Injection takes about 5-10mins.
-After that we will leave it for about 30mins to let the foam fully seals off all hollow section and start moisute with air.
-Foam mosturing process is about 30mins*.
* After 30mins you may take your vehicle and drive home.But for the foam to moiture 100%, it takes about 1 week time.
Customer car:
