Search results

  1. N

    Trade in Price.

    2008 Gen2 CPS, Manual, Full spec ,Black
  2. N

    Loose Parts For Sale...chop shop item...

    hi.. searching for k20 coil 4 biji skali dgn socket.... Denso 099700-070 ... ada kat crv integra ep3 s2000 civic . pm or sms 0129087226..
  3. N

    Chop Shop Item..

    hi.. searching for k20 coil 4 biji skali dgn socket.... Denso 099700-070 ... ada kat crv integra ep3 s2000 civic . pm or sms 0129087226..
  4. N

    Chop Shop sale..

    hi.. searching for k20 coil 4 biji skali dgn socket.... Denso 099700-070 ... ada kat crv integra ep3 s2000 civic . pm or sms 0129087226..
  5. N

    [Inq] What is different between Cylinder Pressure And Compression Ratio

    From my knowledge : Cylinder Pressure : pressure that been created by explotion of air&fuel inside the cylinder to move the engine (measure by special pressure sensor, unit in mpa). Normally for Four stroke diesel engine: 5 - 7 MPa , Two stroke petrol engine: 1.5 MPa & Four stroke petrol...
  6. N

    How to make 4g64T hi rev motor??

    humm... this is what i found some info that kiggly(kevin) post in dsmtuner & evom... 1. about bearing clearance & oil If you're running 10w30 and not crazy power levels, you should shoot for near-stock clearances. In untouched DSM engines they were usually in the 0.002-0.0025" range. In the...
  7. How to make 4g64T hi rev motor??

    hi all... i hope all can give input about 2.4 block hi rev.... i'm going to rev it around 8500-9000rpm. I know base on calculation it safe only at 7500rpm.. huumm... but kiggly already proof that 4g64 with 150mm rod can make 9600rpm .... what is the secret?? hoping all of us can share...
  8. N

    wat is the best forged piston & con rod for 4g63?

    jo1, not only engine builder n machine shop... the tuner oso... that why the engine still healthy.. huhuhu huumm.. about piston slap, just dun rev it while the engine still not in operating temperature.. we not only care about piston toughness, we also care about it weight... less piston side...
  9. N

    New Bosch vs Sard vs Power Enterprise vs Delphi Injector

    yaa.. all the new bluemax Hi-Z (900,1100,1680&2150cc) are new bosch injector, some of it mod. by fic to get more flow & better fuel spray pattern... the old blumax still low impedance but alot more better compare to old fic bosch pintle style.. if use race fuel that require large volume...
  10. N

    New Bosch vs Sard vs Power Enterprise vs Delphi Injector

    fic blue max diff story already, it also one of good injector... but still below bosch i think.. all above test using same engine, same ecu... control already use e6x sequential fuel... price oso ok ... just arond rm1300++ for the 1200cc .. the sard 700cc also been test on...
  11. New Bosch vs Sard vs Power Enterprise vs Delphi Injector

    here i like to review some injectors & my experience tuning with this injector... engine spec: 4g64 260 tomei cam fairlady piston eagle rod block not skim (piston 2~3mm below deck) (running low compression engine need good injector to run it smoothly) Sard 700cc .. single nozzle ,pintle...
  12. N

    plain water VS water/meth VS pure meth injection

    emmm.... so just run injection with 11.5afr & normal ign timing ... loss power?? compare to no injection ... but forsure it more safe.. or no need to inject at lower boost coz knock still not a big prob there... just inject when knock start to give us prob.. ?? from yr opinion...
  13. N

    plain water VS water/meth VS pure meth injection

    meth = air intake cooling water = supress knock (more on combustion chamber cooling) more meth volume = air intake cooling & octane booster(supress knock) water/meth = some intake cooling & knock supress (need to calculate water/meth ratio & mixture volume to get must best result) using this...
  14. Convert wasted spark to Sequential Ignition

    hi.... just wanna share some info ... 4g63t now can convert our wasted spark coil to sequential without changing to standalone .. we can use devices below : 1. M&W Pro-14 Evo & Pro-Drag Evo ... ( quite expansive huhu) 2. Okadaprojects Plasma Quad PAC 3. EFI Technology IMU Ignition...
  15. plain water VS water/meth VS pure meth injection

    let discuss about it... hope anyone use this share something about it ... thanks.
  16. N

    Engine Knocking After Installing Turbo Kit on Altis 1.6

    yaa.. the cam reduce the dynamic c.r. .... for this VVti engine, how to retard intake cam to reduce some dynamic cr?? Camcon can help?? or unichip have this function??
  17. N

    Engine Knocking After Installing Turbo Kit on Altis 1.6

    huumm.. true also.. hard to say lah. need to check properly.. but i think it setup still not exceed mechanical limit @ 0.5bar... but someone already done 10.5:1 cr @ 1.5bar @ 97ron @ low intake temp .... at peak trq. 0' ign timing ... 7k rpm 13' ign timing .... but it diff setup lah...
  18. N

    Engine Knocking After Installing Turbo Kit on Altis 1.6

    hehe... noob?? wej already play standalone while i'm just no nothing about turbo engine.... hahaha.. quite a lot of question i'm asking him bout engine last 5-6years ago .... :) ---------- Post added at 12:27 PM ---------- 6 hour anti-bump limit - Previous post was at 11:59 AM ----------...
  19. N

    From Ron 97 to 95 without tuning

    ron is all about auto-ignition ( uncontrol combustion flame/explotion) .... all we must care is cylinder temperature, it will cause the low octane fuel to auto ignite & cause prob to our engine ... if we know our engine setup still not exceed cylinder temp. that will cause the fuel to...
  20. N

    Basic E6X Tuning Manual

    hehehe... r u sure ?? :hmmmm:

Random Post Every 5 Minutes

hi, wanna know is there any kia spectra user here? wonder if u can share your opinion?
is this car OK for general use?

around year 03-05

part will spoil easily? just heard from my friend, spectra spare part not that hard to find, just a bit expensive, is it true?

Fuel consumption ok?? example how many sen per km?

if compare to hyundai accent, which more OK ?
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience